Fabrication and characterization of single walled carbon nanotubes-iron phthalocyanine nano-composite
- Akinbulu, Isaac A, Nyokong, Tebello
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/262622 , vital:53537 , xlink:href="https://doi.org/10.1039/C0NJ00395F"
- Description: Nano-composite of single walled carbon nanotubes (SWCNTs) and iron phthalocyanine, peripherally tetra-substituted with diethylaminoethanethiol (complex 2), was fabricated and characterized by infra red (IR) spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM technique gave a convincing image of the nano-composite. Self-assembled monolayer (SAM) film of the composite (SWCNT-2-SAM) was formed on gold electrode. Its surface properties were investigated, relative to that of 2-SAM film, by cyclic voltammetry and scanning electron microscopy (SEM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry, using [Fe(CN)6]3− as redox probe, were used to investigate the dynamics of electron transport in the SWCNT-2-SAM film. Lower charge transfer resistance, RCT, of the SWCNT-2-SAM modified Au electrode, relative to that of the 2-SAM modified Au electrode, was an indication of enhanced electron transport in the presence of SWCNT. The SAM film of the nano-composite showed better electrocatalytic behaviour, relative to that of 2-SAM film, towards the oxidation of the insecticide, carbofuran. The electrode (SWCNT-2-SAM) showed good selectivity for carbofuran, in the presence of diazinon (a non-electroactive interferent) and at lower concentration of the electroactive interferents (chlorpyrifos and dichlorfos).
- Full Text:
- Date Issued: 2010
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/262622 , vital:53537 , xlink:href="https://doi.org/10.1039/C0NJ00395F"
- Description: Nano-composite of single walled carbon nanotubes (SWCNTs) and iron phthalocyanine, peripherally tetra-substituted with diethylaminoethanethiol (complex 2), was fabricated and characterized by infra red (IR) spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM technique gave a convincing image of the nano-composite. Self-assembled monolayer (SAM) film of the composite (SWCNT-2-SAM) was formed on gold electrode. Its surface properties were investigated, relative to that of 2-SAM film, by cyclic voltammetry and scanning electron microscopy (SEM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry, using [Fe(CN)6]3− as redox probe, were used to investigate the dynamics of electron transport in the SWCNT-2-SAM film. Lower charge transfer resistance, RCT, of the SWCNT-2-SAM modified Au electrode, relative to that of the 2-SAM modified Au electrode, was an indication of enhanced electron transport in the presence of SWCNT. The SAM film of the nano-composite showed better electrocatalytic behaviour, relative to that of 2-SAM film, towards the oxidation of the insecticide, carbofuran. The electrode (SWCNT-2-SAM) showed good selectivity for carbofuran, in the presence of diazinon (a non-electroactive interferent) and at lower concentration of the electroactive interferents (chlorpyrifos and dichlorfos).
- Full Text:
- Date Issued: 2010
Syntheses and investigation of the effects of position and nature of substituent on the spectral, electrochemical and spectroelectrochemical properties of new cobalt phthalocyanine complexes
- Akinbulu, Isaac A, Nyokong, Tebello
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261677 , vital:53434 , xlink:href="https://doi.org/10.1016/j.poly.2010.01.004"
- Description: The syntheses of new cobalt phthalocyanine (CoPc) complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral (complex 3b) positions, and with benzylmercapto at the non-peripheral position (complex 5), are reported. The effects of the nature and position of substituent on the spectral, electrochemical and spectroelectrochemical properties of these complexes are investigated. Solution electrochemistry of complex 3a showed three distinctly resolved redox processes attributed to CoIIIPc−2/CoIIPc−2 (E½ = +0.64 V versus Ag|AgCl), CoIIPc−2/CoIPc−2 (E½ = −0.24 V versus Ag|AgCl) and CoIPc−2/CoIPc−3 (E½ = −1.26 V versus Ag|AgCl) species. No ring oxidation was observed in complex 3a. Complex 3b showed both ring-based oxidation, attributed to CoIIIPc−1/CoIIIPc−2 species (Ep = +0.86 V versus Ag|AgCl), and ring-based reduction associated with CoIPc−2/CoIPc−3 species (E½ = −1.46 V versus Ag|AgCl), with the normal metal-based redox processes in CoPc complexes: CoIIIPc−2/CoIIPc−2 (Ep = +0.41 V versus Ag|AgCl) and CoIIPc−2/CoIPc−2 (E½ = −0.38 V versus Ag|AgCl). Solution electrochemistry of complex 5 showed the same type and number of species observed in complex 3a: CoIIIPc−2/CoIIPc−2 (Ep = +0.59 V versus Ag|AgCl), CoIIPc−2/CoIPc−2 (E½ = −0.26 V versus Ag|AgCl) and CoIPc−2/CoIPc−3 (E½ = −1.39 V versus Ag|AgCl) species. These processes were confirmed using spectroelectrochemistry.
- Full Text:
- Date Issued: 2010
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261677 , vital:53434 , xlink:href="https://doi.org/10.1016/j.poly.2010.01.004"
- Description: The syntheses of new cobalt phthalocyanine (CoPc) complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral (complex 3b) positions, and with benzylmercapto at the non-peripheral position (complex 5), are reported. The effects of the nature and position of substituent on the spectral, electrochemical and spectroelectrochemical properties of these complexes are investigated. Solution electrochemistry of complex 3a showed three distinctly resolved redox processes attributed to CoIIIPc−2/CoIIPc−2 (E½ = +0.64 V versus Ag|AgCl), CoIIPc−2/CoIPc−2 (E½ = −0.24 V versus Ag|AgCl) and CoIPc−2/CoIPc−3 (E½ = −1.26 V versus Ag|AgCl) species. No ring oxidation was observed in complex 3a. Complex 3b showed both ring-based oxidation, attributed to CoIIIPc−1/CoIIIPc−2 species (Ep = +0.86 V versus Ag|AgCl), and ring-based reduction associated with CoIPc−2/CoIPc−3 species (E½ = −1.46 V versus Ag|AgCl), with the normal metal-based redox processes in CoPc complexes: CoIIIPc−2/CoIIPc−2 (Ep = +0.41 V versus Ag|AgCl) and CoIIPc−2/CoIPc−2 (E½ = −0.38 V versus Ag|AgCl). Solution electrochemistry of complex 5 showed the same type and number of species observed in complex 3a: CoIIIPc−2/CoIIPc−2 (Ep = +0.59 V versus Ag|AgCl), CoIIPc−2/CoIPc−2 (E½ = −0.26 V versus Ag|AgCl) and CoIPc−2/CoIPc−3 (E½ = −1.39 V versus Ag|AgCl) species. These processes were confirmed using spectroelectrochemistry.
- Full Text:
- Date Issued: 2010
Characterization of polymeric film of a new manganese phthalocyanine complex octa-substituted with 2-diethylaminoethanethiol, and its use for the electrochemical detection of bentazon
- Akinbulu, Isaac A, Nyokong, Tebello
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2009
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/262568 , vital:53534 , xlink:href="https://doi.org/10.1016/j.electacta.2009.07.074"
- Description: Manganese acetate octakis-(2-diethyaminoethanethiol) phthalocyanine (AcMnODEAETPc) was newly synthesized and characterized by spectroscopic and electrochemical methods. Solution electrochemistry of the complex showed three redox processes assigned to MnIIIPc−1/MnIIIPc−2, MnIIIPc−2/MnIIPc−2 and MnIIPc−2/MnIIPc−3 species. The new molecule was polymerized onto a glassy carbon electrode (GCE) to form thin films of different thickness, giving poly-10-AcMnODEAETPc-GCE, poly-20-AcMnODEAETPc-GCE and poly-30-AcMnODEAETPc-GCE, where 10, 20 and 30 represent the number of voltammetry scans during polymerization. Three distinct redox processes were observed on the modified electrode in 0.1 M phosphate buffer solution, pH 5, which confirmed the formation of the polymer. The current signal due to the herbicide, bentazon, was dependent on film thickness; the best signal was obtained on poly-20-AcMnODEAETPc-GCE while poly-10-AcMnODEAETPc-GCE gave the least signal. However, the signals due to the herbicide were better on the different films compared to the bare electrode. Electrochemical impedance spectroscopy (EIS) technique revealed that differences in film thickness offered different charge transfer resistances, Rct, hence difference in current signals for bentazon oxidation were observed on these films. A Tafel slope of 77 mV/decade, obtained for the herbicide on poly-20-AcMnODEAETPc-GCE, denotes a fast one electron transfer followed by a slow chemical step in the electro-oxidation of bentazon. The voltammetry signals of the herbicide on the films indicated the likely involvement of ring-based redox processes in the detection of the herbicide. A plot of background corrected current response, on this film, versus the concentration of bentazon was linear within the range 50–750 μM with a detection limit of 2.48 × 10−7 M.
- Full Text:
- Date Issued: 2009
- Authors: Akinbulu, Isaac A , Nyokong, Tebello
- Date: 2009
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/262568 , vital:53534 , xlink:href="https://doi.org/10.1016/j.electacta.2009.07.074"
- Description: Manganese acetate octakis-(2-diethyaminoethanethiol) phthalocyanine (AcMnODEAETPc) was newly synthesized and characterized by spectroscopic and electrochemical methods. Solution electrochemistry of the complex showed three redox processes assigned to MnIIIPc−1/MnIIIPc−2, MnIIIPc−2/MnIIPc−2 and MnIIPc−2/MnIIPc−3 species. The new molecule was polymerized onto a glassy carbon electrode (GCE) to form thin films of different thickness, giving poly-10-AcMnODEAETPc-GCE, poly-20-AcMnODEAETPc-GCE and poly-30-AcMnODEAETPc-GCE, where 10, 20 and 30 represent the number of voltammetry scans during polymerization. Three distinct redox processes were observed on the modified electrode in 0.1 M phosphate buffer solution, pH 5, which confirmed the formation of the polymer. The current signal due to the herbicide, bentazon, was dependent on film thickness; the best signal was obtained on poly-20-AcMnODEAETPc-GCE while poly-10-AcMnODEAETPc-GCE gave the least signal. However, the signals due to the herbicide were better on the different films compared to the bare electrode. Electrochemical impedance spectroscopy (EIS) technique revealed that differences in film thickness offered different charge transfer resistances, Rct, hence difference in current signals for bentazon oxidation were observed on these films. A Tafel slope of 77 mV/decade, obtained for the herbicide on poly-20-AcMnODEAETPc-GCE, denotes a fast one electron transfer followed by a slow chemical step in the electro-oxidation of bentazon. The voltammetry signals of the herbicide on the films indicated the likely involvement of ring-based redox processes in the detection of the herbicide. A plot of background corrected current response, on this film, versus the concentration of bentazon was linear within the range 50–750 μM with a detection limit of 2.48 × 10−7 M.
- Full Text:
- Date Issued: 2009
- «
- ‹
- 1
- ›
- »