Amoxicillin removal from aqueous media using multi-walled carbon nanotubes
- Mohammadi, Ali, Kazemipour, Maryam, Walker, Roderick B, Ansari, Mehdi
- Authors: Mohammadi, Ali , Kazemipour, Maryam , Walker, Roderick B , Ansari, Mehdi
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183861 , vital:44076 , xlink:href="https://doi.org/10.1080/1536383X.2013.866944"
- Description: Multi-walled carbon nanotubes (MWCNT) were used to separate amoxicillin from aqueous media. The parameters affecting amoxicillin adsorption such as pH, temperature, time, interferences of similar molecules, and the amount of adsorbent used were studied. Amoxicillin adsorption using MWCNT was compared to that using Fullerene C60 and activated carbon (AC). The adsorption efficiency of 0.1 and 0.2 g of MWCNT using in a continuous mode were 86.5% and 87.9%, respectively. Evaluation of the adsorbent capacity showed that each gram of MWCNT can absorb 22.9 mg amoxicillin. The effect of pH was studied over the range 2–8 and revealed that adsorption of the amoxicillin at the initial pH of 4.6 was more effective than any other pH. The adsorption of amoxicillin on MWCNT was much greater than Fullerene C60 and AC. Adsorption data showed that they were best fitted to the Langmuir isotherm.
- Full Text:
- Date Issued: 2015
- Authors: Mohammadi, Ali , Kazemipour, Maryam , Walker, Roderick B , Ansari, Mehdi
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183861 , vital:44076 , xlink:href="https://doi.org/10.1080/1536383X.2013.866944"
- Description: Multi-walled carbon nanotubes (MWCNT) were used to separate amoxicillin from aqueous media. The parameters affecting amoxicillin adsorption such as pH, temperature, time, interferences of similar molecules, and the amount of adsorbent used were studied. Amoxicillin adsorption using MWCNT was compared to that using Fullerene C60 and activated carbon (AC). The adsorption efficiency of 0.1 and 0.2 g of MWCNT using in a continuous mode were 86.5% and 87.9%, respectively. Evaluation of the adsorbent capacity showed that each gram of MWCNT can absorb 22.9 mg amoxicillin. The effect of pH was studied over the range 2–8 and revealed that adsorption of the amoxicillin at the initial pH of 4.6 was more effective than any other pH. The adsorption of amoxicillin on MWCNT was much greater than Fullerene C60 and AC. Adsorption data showed that they were best fitted to the Langmuir isotherm.
- Full Text:
- Date Issued: 2015
Synthesis and characterization of ZnO nanoparticle synthesized by a microwave-assisted combustion method and catalytic activity for the removal of ortho-nitrophenol
- Assi, Navid, Mohammadi, Ali, Sadr Manuchehri, Q, Walker, Roderick B
- Authors: Assi, Navid , Mohammadi, Ali , Sadr Manuchehri, Q , Walker, Roderick B
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183850 , vital:44075 , xlink:href="https://doi.org/10.1080/19443994.2014.891083"
- Description: ZnO nanoparticles were manufactured using microwave-assisted combustion. The structural and morphological properties of the nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Photocatalytic degradation of ortho-nitrophenol (O-NP) in aqueous solution using the synthesized nanoparticles was performed under UV–C irradiation and is reported for the first time. The effect of the initial O-NP concentration, amount of photocatalyst, pH, and salt was investigated during photodegradation. Analysis of the degraded samples using HPLC with UV detection revealed that photocatalysis in the presence of ZnO nanoparticles removed 98% of the O-NP in 5 h. In addition, the photocatalytic degradation kinetics of O-NP were studied, and the results suggest that the data are best fitted to pseudo-first-order kinetic and Langmuir–Hinshelwood models.
- Full Text:
- Date Issued: 2015
- Authors: Assi, Navid , Mohammadi, Ali , Sadr Manuchehri, Q , Walker, Roderick B
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183850 , vital:44075 , xlink:href="https://doi.org/10.1080/19443994.2014.891083"
- Description: ZnO nanoparticles were manufactured using microwave-assisted combustion. The structural and morphological properties of the nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Photocatalytic degradation of ortho-nitrophenol (O-NP) in aqueous solution using the synthesized nanoparticles was performed under UV–C irradiation and is reported for the first time. The effect of the initial O-NP concentration, amount of photocatalyst, pH, and salt was investigated during photodegradation. Analysis of the degraded samples using HPLC with UV detection revealed that photocatalysis in the presence of ZnO nanoparticles removed 98% of the O-NP in 5 h. In addition, the photocatalytic degradation kinetics of O-NP were studied, and the results suggest that the data are best fitted to pseudo-first-order kinetic and Langmuir–Hinshelwood models.
- Full Text:
- Date Issued: 2015
- «
- ‹
- 1
- ›
- »