Ruthenium (II) complexes of mixed bipyridyl and dithiolate/thiourea ligands :|bsynthesis, characterization, photophysical and electrochemical studies
- Authors: Nkombi, Pelokazi
- Date: 2018
- Subjects: Ruthenium Ruthenium compounds Ligands
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/10134 , vital:35358
- Description: Energy is one of the most important factor to influence human lives. The increased in energy demand as well as the detrimental effects posed by emission of greenhouse gases due to continue use of fossil fuels for electricity generation has led to a renewed focus on energy production using renewable energy sources which are relatively cheap, clean and environmentally sustainable. Among the various renewable energy sources used so far, the Dye Synthesized Solar Cells (DSSCs), a form of photovoltaic device is reported for their better efficiencies despite their low cost of production and ability to work relatively under low light conditions. A recent report on the solar-to-electricity conversion efficiency of a typical DSSC sensitizer made from zinc based porphyrin dye coupled with sintered titanium(IV) oxide as semiconductor was 13 percent. In this study, 2,2-bipyridyl-4,4-dicarboxylic acid (bpydc) was used as mixed ligand and four dithiolate ligands; L1 = dipotassium ethoxycarbonyl-1-cyanoethylene-2,2-dithiolate, L2 = dipotassium bis(ethoxycarbonyl)ethane-2,2-dithiolate, L3 = dipotassium cyanodithio imidocarbonate and L4 = dipotassium 2,2-dicyanoethylene-2,2-dithiolate were synthesized while four alkyl thiourea ligands, L5 = 1,3-dimethyl thiourea, L6 = 1,3-diethyl thiourea, L7 = 1,3-diisopropyl thiourea and L8 = 1-methyl thiourea were purchased and used as supplied without further purification. These ligands were used to prepare eight ruthenium(II) complexes of mixed bipyridyl/dithiolate/thiourea. The compounds were characterised by elemental analysis and spectroscopic techniques, namely: Fourier transform infrared (FTIR), Nuclear Magnetic Resonance (NMR), ultraviolet-visible and photoluminescence (PL). Cyclic voltammetry (CV) and square wave voltammetry (SWV) were used for the electrochemical studies. Photoluminescence and UV-Vis spectroscopies were used for geometric and photophysical studies of the complexes respectively. FTIR spectra confirmed presence of functional groups in ligands and coordination of these ligands to ruthenium(II) ions to form complexes. The UV-Vis confirmed that the Ru(II) dithiolene complexes exhibited square planar geometries while the Ru(II) thiourea complexes gave octahedral geometries, this was deduced from the transitions assigned to the complexes. All the ruthenium(II) complexes synthesized showed photoluminescence properties that are suitable for light harvesting and application for dye-sensitized solar cells. Cyclic and square wave voltammetry show Ru(II) thiourea complexes have better redox properties when compared to Ru(II) dithiolate complexes which is ascribed to ligand strength field possibly due to contribution from the two bonded NCS groups.
- Full Text:
- Date Issued: 2018
- Authors: Nkombi, Pelokazi
- Date: 2018
- Subjects: Ruthenium Ruthenium compounds Ligands
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/10134 , vital:35358
- Description: Energy is one of the most important factor to influence human lives. The increased in energy demand as well as the detrimental effects posed by emission of greenhouse gases due to continue use of fossil fuels for electricity generation has led to a renewed focus on energy production using renewable energy sources which are relatively cheap, clean and environmentally sustainable. Among the various renewable energy sources used so far, the Dye Synthesized Solar Cells (DSSCs), a form of photovoltaic device is reported for their better efficiencies despite their low cost of production and ability to work relatively under low light conditions. A recent report on the solar-to-electricity conversion efficiency of a typical DSSC sensitizer made from zinc based porphyrin dye coupled with sintered titanium(IV) oxide as semiconductor was 13 percent. In this study, 2,2-bipyridyl-4,4-dicarboxylic acid (bpydc) was used as mixed ligand and four dithiolate ligands; L1 = dipotassium ethoxycarbonyl-1-cyanoethylene-2,2-dithiolate, L2 = dipotassium bis(ethoxycarbonyl)ethane-2,2-dithiolate, L3 = dipotassium cyanodithio imidocarbonate and L4 = dipotassium 2,2-dicyanoethylene-2,2-dithiolate were synthesized while four alkyl thiourea ligands, L5 = 1,3-dimethyl thiourea, L6 = 1,3-diethyl thiourea, L7 = 1,3-diisopropyl thiourea and L8 = 1-methyl thiourea were purchased and used as supplied without further purification. These ligands were used to prepare eight ruthenium(II) complexes of mixed bipyridyl/dithiolate/thiourea. The compounds were characterised by elemental analysis and spectroscopic techniques, namely: Fourier transform infrared (FTIR), Nuclear Magnetic Resonance (NMR), ultraviolet-visible and photoluminescence (PL). Cyclic voltammetry (CV) and square wave voltammetry (SWV) were used for the electrochemical studies. Photoluminescence and UV-Vis spectroscopies were used for geometric and photophysical studies of the complexes respectively. FTIR spectra confirmed presence of functional groups in ligands and coordination of these ligands to ruthenium(II) ions to form complexes. The UV-Vis confirmed that the Ru(II) dithiolene complexes exhibited square planar geometries while the Ru(II) thiourea complexes gave octahedral geometries, this was deduced from the transitions assigned to the complexes. All the ruthenium(II) complexes synthesized showed photoluminescence properties that are suitable for light harvesting and application for dye-sensitized solar cells. Cyclic and square wave voltammetry show Ru(II) thiourea complexes have better redox properties when compared to Ru(II) dithiolate complexes which is ascribed to ligand strength field possibly due to contribution from the two bonded NCS groups.
- Full Text:
- Date Issued: 2018
Synthesis, characterization and evaluation of photophysical and electrochemical properties of ruthenium(II) complexes for dye-sensitized solar cells
- Authors: Adjogri, Shadrack John
- Date: 2018
- Subjects: Ruthenium Ruthenium compounds
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/17828 , vital:41363
- Description: Eight series of thirty (30) novel heteroleptic ruthenium(II) complexes were designed, synthesized and spectroscopically characterized, with the following general molecular formulae as [Ru(bdmpmar)(H2dcbpy)(NCS)]+, [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2,+, [Ru(bdmpmar)(vpbpp)(H2dcbpy)]2+,[Ru(H2dcbpy)2(N^)(NCS)]+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2], [Ru(H2dcbpy)(N^)(NCS)3]– and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ where bdmpmar is a tridentate ligand of N,N-bis(3, 5-dimethylpyrazol-1-yl-methyl) aromatic organic compound (such aromatic organic compounds(Ar) are anthranilic acid, 4-methoxy-2-nitroaniline, aniline, toluidine, cyclohexylamine and anisidine), vpdiinp represents a monodentate ligand of 11-(4-vinylphenyl)diindeno[1,2-b:2’,1’-e]pyridine, vpbpp represents a monodentate ligand of 4-(4-vinylphenyl)-2.6-bis(phenyl)pyridine and vptpy represents a tridentate ligand of 4’-(4-vinyl)-2,2’:6’,2’’-terpyridine. Meanwhile, N^ represents any of the monodentate ligands of either vpdiinp or vpbpp and (N^^^) represents any of the monodentate ligands either of vpdiinp or vpbpp or NCS as disclosed in series VIII. The complexes were characterized by conductivity measurement, solubility, melting point, UV-Vis, PL, FTIR (ATR), NMR, Cyclic and square wave voltammetry. Nine chelating ligands, comprising of six (6) tripodal chelating ligands, two (2) vinyl monodentate ligands and one (1) vinyl tridentate ligand, were used for the synthesis of ruthenium(II) complexes ATR-FTIR spectra of all the ruthenium(II) complexes measured as solid samples, exhibited fine resolution IR bands in region between 3473-3438 cm-1 of carboxylic group in H2dcbpy. The bands in the range 3040-2950 cm-1 were ascribed to C-H bond stretching for the CH3 groups. The coordination of NCS group in the sphere of ruthenium(II) complexes related to series I, IV, VI VII and one compound of series VIII was investigated by ATR-FTIR spectroscopy. Bands in the range of 2116-2106 cm-1 and 777-770 cm-1 are ascribed to the respective N=C and the C=S bond stretching vibration which confirms the N-coordination of the SCN group. For all the complexes, the stretching vibration of Ru-N bonding was between 466 and 411 cm-1 due to coordination of the nitrogen atoms of the ligands to ruthenium central metal atom. The introduction of the two vinyl monodentate ligands (vpdiinp and vpbpp) in the coordination sphere of [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2+, [Ru(bdmpmar) (vpbpp)(H2dcbpy)]2+, [Ru(H2dcbpy)2(N^)(NCS)]+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2], [Ru(H2dcbpy)(N^)(NCS)3]– and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ respectively, all related to series II, III, IV, V, VI, VII and two compounds of series VIII ruthenium(II) complexes, has been studied using the 1H and 13C NMR spectroscopy techniques. The 1H NMR spectra of series II-VII and the two compounds of series VIII of the ruthenium(II) complexes show multiplets in the aromatic region above 6 ppm due to the presence of either vpdiinp or vpbpp ligand, situated in different magnetic environment. However, no splitting pattern was observed in series I and part of VIII complexes possibly due to the absence vinyl monodentate subunits (vpdiinp and vpbpp) in series I and one of compound in series VIII ruthenium(II) complexes show no signals of complex splitting patterns. Carbon-13 NMR spectra data of series I to VIII ruthenium(II) complexes show most resonance signals range in the aromatic region of (δ 116.54-199.63ppm) corresponding to the molecular formulation of ruthenium(II) complexes incorporating 4,4-dicarboxy-2,2’-bipyridine, bdmpmar, vptpy, vpdiinp or vpbpp and NCS ligands respectively, depending on the intrinsic ligand variations. Carbon-13 NMR spectra data of series I, IV, VI VII and one compound in VIII show resonance peaks within the range 130-135 ppm are ascribed to NCS ligand confirming the presence of N-coordinated thiocyanate. Cyclic voltammograms of series I-IV and VI-VIII complexes display ruthenium-based oxidative peaks and the pyridines ligand-based reductive peaks. The redox behavior of complexes 4-12, 14-16, 18-20, 24-26 and 30 is dominated by the Ru(II)/R(III) redox couple in region (E1/2 between 0.53 and 1.18) and the pyridines ligand-based redox couples in the region between (E1/2 between −0.25 and −1.45). The photophysical property studies of the Ru(II) complexes are determined through the acquisitions of the absorption spectra, which tends to have profound effect on the short circuit current of DSSC. The absorption maxima were tuned by the introduction and variation of six (6) tripodal chelating ligands, two (2) vinyl monodentate ligands and one (1) vinyl tridentate ligand. From the studies, the results show that series IV, V, VI, VII and VIII complexes of molecular formula [Ru(H2dcbpy)2(N^)(NCS)]2+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2]2+, [Ru(H2dcbpy)(N^)(NCS)3]2+ and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ respectively, have higher and multiple local absorption maxima near-IR region than the complexes of series I, II and III of molecular [Ru(bdmpmar)(H2dcbpy)(NCS)]2,+, [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2,+, [Ru(bdmpmar)(vpbpp)(H2dcbpy)]2,+respectively.
- Full Text:
- Date Issued: 2018
- Authors: Adjogri, Shadrack John
- Date: 2018
- Subjects: Ruthenium Ruthenium compounds
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/17828 , vital:41363
- Description: Eight series of thirty (30) novel heteroleptic ruthenium(II) complexes were designed, synthesized and spectroscopically characterized, with the following general molecular formulae as [Ru(bdmpmar)(H2dcbpy)(NCS)]+, [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2,+, [Ru(bdmpmar)(vpbpp)(H2dcbpy)]2+,[Ru(H2dcbpy)2(N^)(NCS)]+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2], [Ru(H2dcbpy)(N^)(NCS)3]– and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ where bdmpmar is a tridentate ligand of N,N-bis(3, 5-dimethylpyrazol-1-yl-methyl) aromatic organic compound (such aromatic organic compounds(Ar) are anthranilic acid, 4-methoxy-2-nitroaniline, aniline, toluidine, cyclohexylamine and anisidine), vpdiinp represents a monodentate ligand of 11-(4-vinylphenyl)diindeno[1,2-b:2’,1’-e]pyridine, vpbpp represents a monodentate ligand of 4-(4-vinylphenyl)-2.6-bis(phenyl)pyridine and vptpy represents a tridentate ligand of 4’-(4-vinyl)-2,2’:6’,2’’-terpyridine. Meanwhile, N^ represents any of the monodentate ligands of either vpdiinp or vpbpp and (N^^^) represents any of the monodentate ligands either of vpdiinp or vpbpp or NCS as disclosed in series VIII. The complexes were characterized by conductivity measurement, solubility, melting point, UV-Vis, PL, FTIR (ATR), NMR, Cyclic and square wave voltammetry. Nine chelating ligands, comprising of six (6) tripodal chelating ligands, two (2) vinyl monodentate ligands and one (1) vinyl tridentate ligand, were used for the synthesis of ruthenium(II) complexes ATR-FTIR spectra of all the ruthenium(II) complexes measured as solid samples, exhibited fine resolution IR bands in region between 3473-3438 cm-1 of carboxylic group in H2dcbpy. The bands in the range 3040-2950 cm-1 were ascribed to C-H bond stretching for the CH3 groups. The coordination of NCS group in the sphere of ruthenium(II) complexes related to series I, IV, VI VII and one compound of series VIII was investigated by ATR-FTIR spectroscopy. Bands in the range of 2116-2106 cm-1 and 777-770 cm-1 are ascribed to the respective N=C and the C=S bond stretching vibration which confirms the N-coordination of the SCN group. For all the complexes, the stretching vibration of Ru-N bonding was between 466 and 411 cm-1 due to coordination of the nitrogen atoms of the ligands to ruthenium central metal atom. The introduction of the two vinyl monodentate ligands (vpdiinp and vpbpp) in the coordination sphere of [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2+, [Ru(bdmpmar) (vpbpp)(H2dcbpy)]2+, [Ru(H2dcbpy)2(N^)(NCS)]+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2], [Ru(H2dcbpy)(N^)(NCS)3]– and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ respectively, all related to series II, III, IV, V, VI, VII and two compounds of series VIII ruthenium(II) complexes, has been studied using the 1H and 13C NMR spectroscopy techniques. The 1H NMR spectra of series II-VII and the two compounds of series VIII of the ruthenium(II) complexes show multiplets in the aromatic region above 6 ppm due to the presence of either vpdiinp or vpbpp ligand, situated in different magnetic environment. However, no splitting pattern was observed in series I and part of VIII complexes possibly due to the absence vinyl monodentate subunits (vpdiinp and vpbpp) in series I and one of compound in series VIII ruthenium(II) complexes show no signals of complex splitting patterns. Carbon-13 NMR spectra data of series I to VIII ruthenium(II) complexes show most resonance signals range in the aromatic region of (δ 116.54-199.63ppm) corresponding to the molecular formulation of ruthenium(II) complexes incorporating 4,4-dicarboxy-2,2’-bipyridine, bdmpmar, vptpy, vpdiinp or vpbpp and NCS ligands respectively, depending on the intrinsic ligand variations. Carbon-13 NMR spectra data of series I, IV, VI VII and one compound in VIII show resonance peaks within the range 130-135 ppm are ascribed to NCS ligand confirming the presence of N-coordinated thiocyanate. Cyclic voltammograms of series I-IV and VI-VIII complexes display ruthenium-based oxidative peaks and the pyridines ligand-based reductive peaks. The redox behavior of complexes 4-12, 14-16, 18-20, 24-26 and 30 is dominated by the Ru(II)/R(III) redox couple in region (E1/2 between 0.53 and 1.18) and the pyridines ligand-based redox couples in the region between (E1/2 between −0.25 and −1.45). The photophysical property studies of the Ru(II) complexes are determined through the acquisitions of the absorption spectra, which tends to have profound effect on the short circuit current of DSSC. The absorption maxima were tuned by the introduction and variation of six (6) tripodal chelating ligands, two (2) vinyl monodentate ligands and one (1) vinyl tridentate ligand. From the studies, the results show that series IV, V, VI, VII and VIII complexes of molecular formula [Ru(H2dcbpy)2(N^)(NCS)]2+, [Ru(H2dcbpy)2(N^)2]2+, [Ru(H2dcbpy)(N^)2(NCS)2]2+, [Ru(H2dcbpy)(N^)(NCS)3]2+ and [Ru(vptpy)(H2dcbpy)(N^^^)]2+ respectively, have higher and multiple local absorption maxima near-IR region than the complexes of series I, II and III of molecular [Ru(bdmpmar)(H2dcbpy)(NCS)]2,+, [Ru(bdmpmar)(vpdiinp)(H2dcbpy)]2,+, [Ru(bdmpmar)(vpbpp)(H2dcbpy)]2,+respectively.
- Full Text:
- Date Issued: 2018
Synthesis, characterization and photophysical studies of RU(II)bipyridyl-dithiocarbamate complexes as sensitizers for dye sensitized solar cells
- Authors: Fudo, Zintle
- Date: 2018
- Subjects: Dye-sensitized solar cells Renewable energy sources
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/6168 , vital:29498
- Description: The depletion of fossil fuels and the increasing energy demand for energy has led to the search for better and improved technologies with special focus renewable energy, especially solar cells. The first generation solar cells based on silicon are expensive, hence dye sensitized solar cells come in as a better alternative as these solar cells are environmental friendly, they have moderately good conversion efficiency and they are relatively cheap to produce. Dithiocarbamate ligands have been widely used in many research fields, as these are versatile ligands. Coordination of dithiocarbamates with metals such as ruthenium has produced high conversion efficiency and have the ability to extend the MLCT absorptions, and this can further extend their wavelength. In this study five dithiocarbamate sodium salt ligands were prepared and were coded as FL1= Aniline, FL2= p- toluidine, FL3= p- anisidine, FL4=dibenzyl, FL5=diphenyl. These ligands were used to synthesize Ru(II) metal complexes which were formulated as [Ru(FLx)(dcbpy)(NCS)] and [Ru(FLx)2(dcbpy)] where FLx is the dithiocarbamate ligand and dcbpy is 2,2-bipyridine-4,4’-dicarboxylic acid and the complexes were coded as FCx. The synthesized compounds were characterized using techniques such as the melting point, molar conductivity, FT-IR and NMR spectroscopy. For spectroelectrochemical studies of the metal complexes, techniques such as UV-Vis and photoluminescence spectroscopy were carried out. Furthermore, redox properties of the complexes were analyzed using cyclic and square wave voltammetry. The FT-IR displayed all the expected peaks of interest both in the dithiocarbamate ligands and in the metal complexes. The electronic spectra confirmed the successful coordination of ligand to the metal centre, the electronic spectra of the complexes also confirmed the six coordinate octahedral geometry of the complexes. The complexes exhibited some photoluminescence properties that are suitable for dye sensitization. The cyclic voltammogram of the complexes displayed more reduction potentials that could be attributed to the π-conjugation in the ligands incorporated during synthesis. The square wave voltammogram of the complexes is in agreement with the results obtained in cyclic voltammetry.
- Full Text:
- Date Issued: 2018
- Authors: Fudo, Zintle
- Date: 2018
- Subjects: Dye-sensitized solar cells Renewable energy sources
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/6168 , vital:29498
- Description: The depletion of fossil fuels and the increasing energy demand for energy has led to the search for better and improved technologies with special focus renewable energy, especially solar cells. The first generation solar cells based on silicon are expensive, hence dye sensitized solar cells come in as a better alternative as these solar cells are environmental friendly, they have moderately good conversion efficiency and they are relatively cheap to produce. Dithiocarbamate ligands have been widely used in many research fields, as these are versatile ligands. Coordination of dithiocarbamates with metals such as ruthenium has produced high conversion efficiency and have the ability to extend the MLCT absorptions, and this can further extend their wavelength. In this study five dithiocarbamate sodium salt ligands were prepared and were coded as FL1= Aniline, FL2= p- toluidine, FL3= p- anisidine, FL4=dibenzyl, FL5=diphenyl. These ligands were used to synthesize Ru(II) metal complexes which were formulated as [Ru(FLx)(dcbpy)(NCS)] and [Ru(FLx)2(dcbpy)] where FLx is the dithiocarbamate ligand and dcbpy is 2,2-bipyridine-4,4’-dicarboxylic acid and the complexes were coded as FCx. The synthesized compounds were characterized using techniques such as the melting point, molar conductivity, FT-IR and NMR spectroscopy. For spectroelectrochemical studies of the metal complexes, techniques such as UV-Vis and photoluminescence spectroscopy were carried out. Furthermore, redox properties of the complexes were analyzed using cyclic and square wave voltammetry. The FT-IR displayed all the expected peaks of interest both in the dithiocarbamate ligands and in the metal complexes. The electronic spectra confirmed the successful coordination of ligand to the metal centre, the electronic spectra of the complexes also confirmed the six coordinate octahedral geometry of the complexes. The complexes exhibited some photoluminescence properties that are suitable for dye sensitization. The cyclic voltammogram of the complexes displayed more reduction potentials that could be attributed to the π-conjugation in the ligands incorporated during synthesis. The square wave voltammogram of the complexes is in agreement with the results obtained in cyclic voltammetry.
- Full Text:
- Date Issued: 2018
- «
- ‹
- 1
- ›
- »