Electrospun fiber based colorimetric probes for aspartate aminotransferase and I7ß-estradiol
- Authors: Pule, Bellah Oreeditse
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54869 , vital:26623
- Description: Fabrication, characterization and application of electrospun polymer composite based colorimetric probes are presented in this thesis. The first part of the thesis involved the development of a protocol for in situ reduction of gold trication (Au³+) into metallic gold atoms with sodium borohydride. The prepared PS-Au NPs showed an SPR band at 542 nm. Furthermore the absorbance of the colloidal Au NPs in polystyrene exhibited a good linear correlation (r2 = 0.9934) to E2 concentration in the range 5 to 50 ppb. The lowest naked eye detection limit was found to be 0.5 ppb and could further be easily monitored by UV-vis spectrophotometer. Upon interaction with E2 Au NPs aggregated to give nanoparticle clusters, confirmed through TEM analysis. Different concentrations of Au NPs were found to have a significant effect on the conductivity of the PS-Au NPs solution. At low concentrations of Au NPs (0.002, 0.015 and 0.025% w/v) PS-Au NPs solution could be electrospun without clogging. The FE-SEM images showed a non-beaded morphology of PS-Au NPs composite fibers. Upon interaction of the colorimetric probe strips with various E2 concentrations it was observed that with increasing E2 concentrations (50 ng/ml to 1000 µg/ml) the colour of the probe changed gradually from white to shades of pink and eventually to shades of blue at higher E2 concentrations. The visible cut-off concentration was 100 ng/ml. The second component of the thesis focussed on the development of diazonium dye-nylon 6 colorimetric probe for aspartate aminotransferase. At optimal pH 7.4 the enzyme was stable, highly active and catalyzed a reaction that was susceptible to detailed kinetic analysis by continuous optical methods. The KM values for L-aspartate, a- ketoglutarate and oxaloacetate were 2.60, 0.59 and 0.066 mM, respectively. On the basis of these KM values the solid-state colorimetric probe was developed. A colour change occurred when an electrospun dye-N 6 probes were exposed to visibly detectable concentrations of oxaloacetate, an AST-catalyzed reaction product. While monitoring AST activity at 530 run, a linear relation was obtained between oxaloacetate concentrations ranging from 0.4 - 7.4 µg/ml. Naked eye detection limit of 2.4 µg/ml oxalaoacetate equivalence of 10 times the normal AST activity was attained. The colorimetric probe was in addition, tested against co-substrates aspartate, ketoglutarate and a variety of other compounds such as alanine, pryruvate, as well as glutamic, malaic and succinic acids known to interfere with AST activity. Each compound elicited a distinct and unambiguous colour change upon interaction with the colorimetric probe. Further X-ray powder diffraction (XRD), duNouy ring tensiometer, Brunauer- Emmett- Teller (BET) and energy dispersive X-ray spectroscopy (EDS/EDX) characterization confirmed composition and stability of the colorimetric probes. Colorimetric probes developed in this thesis are relatively cost effective, simple and "rugged" for measurement of analytes with visual detection without sample pretreatment in matrices, such as plasma and dairy effluents. The probes warrant further investigation as they have shown potential and offer a promising solid-state platform for both clinical diagnostics and environmental monitoring.
- Full Text:
- Date Issued: 2014
Solid-phase extraction based sample preparation for the determination of drug and organic pollutant residue
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011