Bioethical analysis of selected biomedical issues in South Africa and other countries
- Authors: Rusere, Jean
- Date: 2021-04
- Subjects: To be added
- Language: English
- Type: thesis , text , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/178530 , vital:42948
- Description: Access restricted until April 2023. , Thesis (MPharm) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Rusere, Jean
- Date: 2021-04
- Subjects: To be added
- Language: English
- Type: thesis , text , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/178530 , vital:42948
- Description: Access restricted until April 2023. , Thesis (MPharm) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-04
Infant health: a community-based assessment and educational intervention in two rural communities in the Eastern Cape.
- Authors: Kuzeeko, Faith
- Date: 2021
- Subjects: Angus Gillis Foundation (South Africa) , Infants -- Mortality -- South Africa , Infants -- Health and hygiene -- South Africa , Breastfeeding -- South Africa -- Eastern Cape , Infants -- Care -- Equipment and supplies , Infants -- Care -- South Africa -- Eastern Cape -- Case studies , Children -- Mortality -- South Africa , High throughput screening (Drug development)
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/170837 , vital:41964
- Description: South Africa is on track to attaining the 2030 Agenda on reducing under-five deaths to 25 deaths per 1000 live births at its current momentum, however an unacceptable amount of infants are still at risk from preventable illnesses. Malnutrition is the major underlined cause of infant mortality rates in South Africa. Exclusive breastfeeding rates are low nationwide due to low exposure to breastfeeding information, some mothers having other commitments and others having breastfeeding difficulties. Implementation and expansion of simple, cost-effective interventions, such as exclusive breastfeeding for six months to reduce and/or prevent infant mortality rates, remains low in South Africa. The aim of the study was to determine one infant health issue of major concern to participants in two rural villages in the Eastern Cape, namely Glenmore and Ndwayana. The identified infant health issue was used to design an educational intervention in the villages. This was the second phase of this study. A community-based participatory approach was utilized in which the Angus Gillis Foundation, a non-profit organization that works in these communities, was one of the stakeholders. Stock status of WHO priority medicines for infants, semi-structured interviews and focus group discussions were carried out during the baseline study. The intervention phase contained pre-2 intervention semi-structured interviews with ten pregnant women followed by an educational intervention with nine out of the ten; and finally, a post-intervention with seven out of the ten women. A questionnaire was completed by members of the Angus Gillis Foundation to provide feedback on the sustainability of the intervention. Semi-structured interviews revealed that medicines stocked at the clinic parallel those indicated in the WHO priority medicines list for infants. The results from the focus group discussions indicated that mothers do not exclusively breastfeed their infants during the first six months. Pre- and post-intervention results on exclusive breastfeeding illustrated a positive change in participants’ knowledge and intent to breastfeed exclusively for six months. They showed a better understanding of the importance of exclusive breastfeeding and indicated a more focussed intention and confidence to carry out optimal breastfeeding practices. In the questionnaire the members of the Angus Gillis Foundation stated that the intervention is sustainable as it was linked with the existing networks. These include educational programs carried out in the villages by the foundation together with positive health champions, community health workers and women self-help groups; which will be able to build on the present knowledge base. Finally, the study also included the design of a booklet on the identified infant health issue. In conclusion, participants highlighted lack of understanding regarding breastfeeding as an issue of concern during the baseline phase of the study. This community-based educational intervention improved the understanding of breastfeeding among the participants, resulting in a positive change in perception with regards to exclusive breastfeeding practices.
- Full Text:
- Date Issued: 2021
- Authors: Kuzeeko, Faith
- Date: 2021
- Subjects: Angus Gillis Foundation (South Africa) , Infants -- Mortality -- South Africa , Infants -- Health and hygiene -- South Africa , Breastfeeding -- South Africa -- Eastern Cape , Infants -- Care -- Equipment and supplies , Infants -- Care -- South Africa -- Eastern Cape -- Case studies , Children -- Mortality -- South Africa , High throughput screening (Drug development)
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/170837 , vital:41964
- Description: South Africa is on track to attaining the 2030 Agenda on reducing under-five deaths to 25 deaths per 1000 live births at its current momentum, however an unacceptable amount of infants are still at risk from preventable illnesses. Malnutrition is the major underlined cause of infant mortality rates in South Africa. Exclusive breastfeeding rates are low nationwide due to low exposure to breastfeeding information, some mothers having other commitments and others having breastfeeding difficulties. Implementation and expansion of simple, cost-effective interventions, such as exclusive breastfeeding for six months to reduce and/or prevent infant mortality rates, remains low in South Africa. The aim of the study was to determine one infant health issue of major concern to participants in two rural villages in the Eastern Cape, namely Glenmore and Ndwayana. The identified infant health issue was used to design an educational intervention in the villages. This was the second phase of this study. A community-based participatory approach was utilized in which the Angus Gillis Foundation, a non-profit organization that works in these communities, was one of the stakeholders. Stock status of WHO priority medicines for infants, semi-structured interviews and focus group discussions were carried out during the baseline study. The intervention phase contained pre-2 intervention semi-structured interviews with ten pregnant women followed by an educational intervention with nine out of the ten; and finally, a post-intervention with seven out of the ten women. A questionnaire was completed by members of the Angus Gillis Foundation to provide feedback on the sustainability of the intervention. Semi-structured interviews revealed that medicines stocked at the clinic parallel those indicated in the WHO priority medicines list for infants. The results from the focus group discussions indicated that mothers do not exclusively breastfeed their infants during the first six months. Pre- and post-intervention results on exclusive breastfeeding illustrated a positive change in participants’ knowledge and intent to breastfeed exclusively for six months. They showed a better understanding of the importance of exclusive breastfeeding and indicated a more focussed intention and confidence to carry out optimal breastfeeding practices. In the questionnaire the members of the Angus Gillis Foundation stated that the intervention is sustainable as it was linked with the existing networks. These include educational programs carried out in the villages by the foundation together with positive health champions, community health workers and women self-help groups; which will be able to build on the present knowledge base. Finally, the study also included the design of a booklet on the identified infant health issue. In conclusion, participants highlighted lack of understanding regarding breastfeeding as an issue of concern during the baseline phase of the study. This community-based educational intervention improved the understanding of breastfeeding among the participants, resulting in a positive change in perception with regards to exclusive breastfeeding practices.
- Full Text:
- Date Issued: 2021
Antimicrobial resistance awareness program at Settlers Hospital
- Manhanzva, Rufaro Immaculate
- Authors: Manhanzva, Rufaro Immaculate
- Date: 2019
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/97712 , vital:31475
- Description: Expected release date-April 2021
- Full Text: false
- Date Issued: 2019
- Authors: Manhanzva, Rufaro Immaculate
- Date: 2019
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/97712 , vital:31475
- Description: Expected release date-April 2021
- Full Text: false
- Date Issued: 2019
Collaborative health literacy development: a World Health Organization workplace health promotion approach to address tobacco use
- Authors: Duxbury, Theodore Orlando
- Date: 2019
- Subjects: Tobacco use -- Health aspects , Smoking -- Health aspects , Employee health promotion , Employee health promotion -- Computer programs , Rhodes University -- Employees -- Tobacco use
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/104116 , vital:29930
- Description: Background: Non-Communicable Diseases (NCDs) are a major global public health threat and tobacco use in particular is the leading cause of preventable illness and mortality globally. Furthermore, vulnerable and socially disadvantaged people get sicker and die sooner, especially because they are at higher risk of being exposed to harmful products such as tobacco and have limited access to health services. Tobacco use also has a major impact on the workplace, adversely affecting work productivity and increasing absenteeism. Both the living and work environments, therefore, play an important role in contributing towards the NCD epidemic. Demographics, culture, behaviour change reluctance and health literacy are all factors which exacerbate tobacco prevalence in South Africa. Workplace health promotion, however, is not well established in many workplaces. This study aimed to develop, implement and evaluate the effectiveness of a culturallysensitive and contextually-appropriate collaborative workplace health promotion literacy programme on tobacco use, utilizing tailored health information leaflets and the Rhodes University peer educators support staff, guided by the World Health Organization Workplace Health Promotion Framework. Method: The research was conducted using a participatory action research approach, which involved four phases: Firstly, the Exploratory phase assessed tobacco-related health promotion policies and practices at Rhodes University; and established facilitating and constraining factors related to tobacco use. Secondly, the Educational health promotion phase involved designing and testing a health promotion educational intervention to address tobacco use related challenges, which took the form of culturally sensitive and appropriate health information leaflets to be used as an educational intervention Thirdly, in the Implementation phase health promotion training workshops were conducted with volunteering Rhodes University Peer Educators. Finally, an Evaluation phase involved evaluating the tobacco health promotion programme presented to the Rhodes University Peer Educators through a focus group discussion; and evaluating Peer Educator recall on the tobacco related health information discussed during the training workshops through a post-post intervention questionnaire. Eight semi-structured interviews (SSIs) and seven focus group discussions (FGDs) were conducted with support staff, peer educators and key stakeholders to establish the need for a comprehensive workplace health promotion initiative, and to identify the facilitating and constraining factors to conducting such an initiative on tobacco use at the University. Three health information leaflets (HILs) were developed collaboratively with the Peer Educators following a series of scientific, end-user testing approaches. The HILs were tested for readability, comprehension, actionability and suitability. A four-day health promotion training programme was conducted to improve user friendliness, memory retention and recall of the HILs by the peer educators and to improve tobacco related health literacy aspects. The participants’ memory recall was evaluated using a pre- and post-, and post-post-intervention questionnaire to evaluate knowledge transfer. The study participants were also equipped with the completed HILs to distribute to their peers and to use as reference sources of information when needed in future. Results: The peer educators and institutional management supported the need for a tobacco workplace health promotion intervention. The intervention and evaluation phase of this study proved that health information material developed was readable, actionable, suitable, userfriendly, culturally sensitive and contextually appropriate. The workshops resulted in a significant increase in the participants’ tobacco related health knowledge. Through the adoption of a collaborative approach to the research, the participants felt empowered and ready to be agents of change amongst their peers in the workplace. Recommendations: The collective use of external expert reviewers, end-user testing techniques and validated computer programmes are recommended to improve the validity of health promotion research outcomes. A longitudinal study that focus on behaviour change, specifically, with health evaluation and monitoring aspects could be conducted as the next step to this study.
- Full Text:
- Date Issued: 2019
- Authors: Duxbury, Theodore Orlando
- Date: 2019
- Subjects: Tobacco use -- Health aspects , Smoking -- Health aspects , Employee health promotion , Employee health promotion -- Computer programs , Rhodes University -- Employees -- Tobacco use
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/104116 , vital:29930
- Description: Background: Non-Communicable Diseases (NCDs) are a major global public health threat and tobacco use in particular is the leading cause of preventable illness and mortality globally. Furthermore, vulnerable and socially disadvantaged people get sicker and die sooner, especially because they are at higher risk of being exposed to harmful products such as tobacco and have limited access to health services. Tobacco use also has a major impact on the workplace, adversely affecting work productivity and increasing absenteeism. Both the living and work environments, therefore, play an important role in contributing towards the NCD epidemic. Demographics, culture, behaviour change reluctance and health literacy are all factors which exacerbate tobacco prevalence in South Africa. Workplace health promotion, however, is not well established in many workplaces. This study aimed to develop, implement and evaluate the effectiveness of a culturallysensitive and contextually-appropriate collaborative workplace health promotion literacy programme on tobacco use, utilizing tailored health information leaflets and the Rhodes University peer educators support staff, guided by the World Health Organization Workplace Health Promotion Framework. Method: The research was conducted using a participatory action research approach, which involved four phases: Firstly, the Exploratory phase assessed tobacco-related health promotion policies and practices at Rhodes University; and established facilitating and constraining factors related to tobacco use. Secondly, the Educational health promotion phase involved designing and testing a health promotion educational intervention to address tobacco use related challenges, which took the form of culturally sensitive and appropriate health information leaflets to be used as an educational intervention Thirdly, in the Implementation phase health promotion training workshops were conducted with volunteering Rhodes University Peer Educators. Finally, an Evaluation phase involved evaluating the tobacco health promotion programme presented to the Rhodes University Peer Educators through a focus group discussion; and evaluating Peer Educator recall on the tobacco related health information discussed during the training workshops through a post-post intervention questionnaire. Eight semi-structured interviews (SSIs) and seven focus group discussions (FGDs) were conducted with support staff, peer educators and key stakeholders to establish the need for a comprehensive workplace health promotion initiative, and to identify the facilitating and constraining factors to conducting such an initiative on tobacco use at the University. Three health information leaflets (HILs) were developed collaboratively with the Peer Educators following a series of scientific, end-user testing approaches. The HILs were tested for readability, comprehension, actionability and suitability. A four-day health promotion training programme was conducted to improve user friendliness, memory retention and recall of the HILs by the peer educators and to improve tobacco related health literacy aspects. The participants’ memory recall was evaluated using a pre- and post-, and post-post-intervention questionnaire to evaluate knowledge transfer. The study participants were also equipped with the completed HILs to distribute to their peers and to use as reference sources of information when needed in future. Results: The peer educators and institutional management supported the need for a tobacco workplace health promotion intervention. The intervention and evaluation phase of this study proved that health information material developed was readable, actionable, suitable, userfriendly, culturally sensitive and contextually appropriate. The workshops resulted in a significant increase in the participants’ tobacco related health knowledge. Through the adoption of a collaborative approach to the research, the participants felt empowered and ready to be agents of change amongst their peers in the workplace. Recommendations: The collective use of external expert reviewers, end-user testing techniques and validated computer programmes are recommended to improve the validity of health promotion research outcomes. A longitudinal study that focus on behaviour change, specifically, with health evaluation and monitoring aspects could be conducted as the next step to this study.
- Full Text:
- Date Issued: 2019
Formulation, development and assessment of an orodispersible taste masked sildenafil film for paediatric use
- Authors: Naidu, Hariska
- Date: 2019
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/97635 , vital:31466
- Description: Expected release date-April 2021
- Full Text: false
- Date Issued: 2019
- Authors: Naidu, Hariska
- Date: 2019
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/97635 , vital:31466
- Description: Expected release date-April 2021
- Full Text: false
- Date Issued: 2019
Workplace health promotion at Rhodes University: harmful use of alcohol
- Authors: Marara, Praise
- Date: 2019
- Subjects: Chronic diseases -- South Africa , Health education -- South Africa , Drinking of alcoholic beverages -- Health aspects -- South Africa , Employees -- Alcohol use -- South Africa , Employee health promotion -- South Africa , Rhodes University -- Employees -- Health and hygiene
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/67444 , vital:29088
- Description: Background: Non-communicable diseases (NCDs) are responsible for 38 million deaths annually, which translates to 68% of global deaths every year. Incidence and prevalence of NCDs are increasing rapidly and the poor bear a disproportionate burden. The increase in NCDs has been primarily due to a proliferation of modifiable risk factors, such as unhealthy diet, physical inactivity, tobacco use, and excessive alcohol consumption. Substance abuse, mainly of alcohol, is a common cause of health problems in almost all countries across the globe. Alcohol abuse is a major contributor to the global burden of diseases and accounts for 3.3 million deaths, approximately 5.9% of all global deaths, annually. Alcohol misuse is the fifth leading risk factor for premature death and disability and is the top risk factor among people between 15 and 49 years of age. The rise of harmful use of alcohol in South Africa contributes to the disease burden faced by the country, with alcohol-related disorders making up 44.6% of all alcohol-attributable disabilities. Strategies to reduce harmful use of alcohol include national policies and educational interventions including health promotion. Health promotion is a common practice in the prevention of NCDs, but workplace health promotion has not yet been well established in many workplaces. Identification of past workplace initiatives and exploring their facilitating and limiting factors is thus important to consider when planning future initiatives. Raising awareness on harmful use of alcohol through workplace health promotion projects can help to prevent and reduce alcohol-related problems. For these health promotion activities to succeed, they need to be developed with consideration of factors such as the environment, culture, and socio-economic standing of the intended target population. Method: This study, conducted at Rhodes University, followed a mixed methods research approach and consisted of two phases. The first phase of the current study was a needs assessment and involved working with the key stakeholders. Using the Community Based Participatory Research approach and the Centres for Disease Control and prevention workplace health model to guide the research, five semi-structured interviews were conducted with key stakeholders to identify factors affecting workplace health promotion, and their opinions on how to improve these initiatives were sought. The participants were asked to identify areas on which the intended intervention should focus, as well as to identify their preferred means of communicating health messages. During this phase, a group of peer educators who volunteered their involvement in the health promotion project focusing on harmful use of alcohol was also identified. The second phase of this project aimed to address concerns raised in the first phase through a health promotion initiative for support staff that focuses on the prevention of NCDs diseases through reducing alcohol related harm. During the educational health promotion phase of the study, three health information leaflets based on harmful use of alcohol were designed. These leaflets went through a series of evaluations by the researchers’ peers, support staff during a pilot study, peer educators and other health professionals to assess content validity, context specificity, and cultural appropriateness for the target group. The health information leaflets were then used as written materials in the educational intervention of the project and were also used to design a poster. Through participatory involvement, a facilitator’s manual on harmful use of alcohol was developed, which was used during the workshops in the implementation phase of the research. The facilitator’s manual was modified based on provided feedback on improving the content of the facilitator’s manual. The readability of the manual was also performed to make it suitable for the end users. The peer educators were also trained through workshops to enable them to promote and raise awareness on harmful use of alcohol to others in the workplace. Workshops were participatory in nature and were also equipped with the completed health information leaflets to distribute to their peers and to use as reference sources of information when needed. Results: Participants in the semi-structured interviews reported that some health promotion initiatives have previously been attempted and advertised to support staff, but there was poor participant participation. Peer educators reported that these initiatives were not communicated to them and venues and work commitments sometimes were barriers to participation in these projects. The peer educators suggested incentivising initiatives for better participation. Another key suggestion was to inform and to include their managers and supervisors in these initiatives so they are permitted to take time off work. Health education material like posters or leaflets were also proposed as modes of delivering health information. During the design of the material to be used for this project’s intended intervention, the health information leaflets were deemed readable, suitable, actionable, context-specific, and culturally appropriate. Workshops conducted during Phase 2 of the study proved to be valuable in training peer educators. Peer educators also deemed the workshops useful, and reported their readiness to be agents of change in the workplace. Conclusions: Based on the input of key stakeholders and peer educators, there is currently no health promotion policy at Rhodes University, especially with respect to NCDs health promotion policies and protocols for NCDs. Health promotion initiatives, especially for support staff, that address NCDs have previously been attempted at the university but were not successful. Factors affecting workplace health promotion were identified. Knowledge of these factors was useful when implementing the health promotion project on harmful use of alcohol. The health leaflets were deemed suitable for use by the target population. Peer educators who went through the workshops and were provided with the facilitators’ manuals concluded that the sessions were useful in their continued participation in the health promotion project. Continued involvement of the Wellness Office and peer educators can assist in ensuring the sustainability of this workplace health initiative.
- Full Text:
- Date Issued: 2019
- Authors: Marara, Praise
- Date: 2019
- Subjects: Chronic diseases -- South Africa , Health education -- South Africa , Drinking of alcoholic beverages -- Health aspects -- South Africa , Employees -- Alcohol use -- South Africa , Employee health promotion -- South Africa , Rhodes University -- Employees -- Health and hygiene
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/67444 , vital:29088
- Description: Background: Non-communicable diseases (NCDs) are responsible for 38 million deaths annually, which translates to 68% of global deaths every year. Incidence and prevalence of NCDs are increasing rapidly and the poor bear a disproportionate burden. The increase in NCDs has been primarily due to a proliferation of modifiable risk factors, such as unhealthy diet, physical inactivity, tobacco use, and excessive alcohol consumption. Substance abuse, mainly of alcohol, is a common cause of health problems in almost all countries across the globe. Alcohol abuse is a major contributor to the global burden of diseases and accounts for 3.3 million deaths, approximately 5.9% of all global deaths, annually. Alcohol misuse is the fifth leading risk factor for premature death and disability and is the top risk factor among people between 15 and 49 years of age. The rise of harmful use of alcohol in South Africa contributes to the disease burden faced by the country, with alcohol-related disorders making up 44.6% of all alcohol-attributable disabilities. Strategies to reduce harmful use of alcohol include national policies and educational interventions including health promotion. Health promotion is a common practice in the prevention of NCDs, but workplace health promotion has not yet been well established in many workplaces. Identification of past workplace initiatives and exploring their facilitating and limiting factors is thus important to consider when planning future initiatives. Raising awareness on harmful use of alcohol through workplace health promotion projects can help to prevent and reduce alcohol-related problems. For these health promotion activities to succeed, they need to be developed with consideration of factors such as the environment, culture, and socio-economic standing of the intended target population. Method: This study, conducted at Rhodes University, followed a mixed methods research approach and consisted of two phases. The first phase of the current study was a needs assessment and involved working with the key stakeholders. Using the Community Based Participatory Research approach and the Centres for Disease Control and prevention workplace health model to guide the research, five semi-structured interviews were conducted with key stakeholders to identify factors affecting workplace health promotion, and their opinions on how to improve these initiatives were sought. The participants were asked to identify areas on which the intended intervention should focus, as well as to identify their preferred means of communicating health messages. During this phase, a group of peer educators who volunteered their involvement in the health promotion project focusing on harmful use of alcohol was also identified. The second phase of this project aimed to address concerns raised in the first phase through a health promotion initiative for support staff that focuses on the prevention of NCDs diseases through reducing alcohol related harm. During the educational health promotion phase of the study, three health information leaflets based on harmful use of alcohol were designed. These leaflets went through a series of evaluations by the researchers’ peers, support staff during a pilot study, peer educators and other health professionals to assess content validity, context specificity, and cultural appropriateness for the target group. The health information leaflets were then used as written materials in the educational intervention of the project and were also used to design a poster. Through participatory involvement, a facilitator’s manual on harmful use of alcohol was developed, which was used during the workshops in the implementation phase of the research. The facilitator’s manual was modified based on provided feedback on improving the content of the facilitator’s manual. The readability of the manual was also performed to make it suitable for the end users. The peer educators were also trained through workshops to enable them to promote and raise awareness on harmful use of alcohol to others in the workplace. Workshops were participatory in nature and were also equipped with the completed health information leaflets to distribute to their peers and to use as reference sources of information when needed. Results: Participants in the semi-structured interviews reported that some health promotion initiatives have previously been attempted and advertised to support staff, but there was poor participant participation. Peer educators reported that these initiatives were not communicated to them and venues and work commitments sometimes were barriers to participation in these projects. The peer educators suggested incentivising initiatives for better participation. Another key suggestion was to inform and to include their managers and supervisors in these initiatives so they are permitted to take time off work. Health education material like posters or leaflets were also proposed as modes of delivering health information. During the design of the material to be used for this project’s intended intervention, the health information leaflets were deemed readable, suitable, actionable, context-specific, and culturally appropriate. Workshops conducted during Phase 2 of the study proved to be valuable in training peer educators. Peer educators also deemed the workshops useful, and reported their readiness to be agents of change in the workplace. Conclusions: Based on the input of key stakeholders and peer educators, there is currently no health promotion policy at Rhodes University, especially with respect to NCDs health promotion policies and protocols for NCDs. Health promotion initiatives, especially for support staff, that address NCDs have previously been attempted at the university but were not successful. Factors affecting workplace health promotion were identified. Knowledge of these factors was useful when implementing the health promotion project on harmful use of alcohol. The health leaflets were deemed suitable for use by the target population. Peer educators who went through the workshops and were provided with the facilitators’ manuals concluded that the sessions were useful in their continued participation in the health promotion project. Continued involvement of the Wellness Office and peer educators can assist in ensuring the sustainability of this workplace health initiative.
- Full Text:
- Date Issued: 2019
Medicine use in swallowing-impaired patients: Pharmacists’ knowledge, practice and information needs
- Authors: Masilamoney, Mehrusha
- Date: 2018
- Subjects: Deglutition disorders , Drugs -- Administration , Oral medication -- Administration , Pharmacists -- Practice , South African Pharmacy Council
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/61940 , vital:28086
- Description: Dysphagia, or swallowing impairment, is a growing problem that affects 13.5% of the general population. The ability to swallow is essential for patients taking oral medicines, so this presents a challenge for swallowing-impaired (SI) patients as tablets and capsules will usually require modification prior to ingestion. Pharmacists should play a central role in advising SI patients about their medicine use, as well as problems that may impact on safety, adherence and therapeutic outcome. However, little is known about pharmacists’ level of knowledge, their practice and their information needs when dealing with SI patients and their use of medicines. The aim of this study was to investigate pharmacist knowledge, practice and information needs relating to the support of SI patients and their medicine-related needs. The study design included both quantitative and qualitative methods. A quantitative questionnaire was developed to collect data on the knowledge, practice and information needs of pharmacists and was piloted in 10 pharmacists, which resulted in minor modifications. The questionnaire was converted to a web-based survey and emailed to all pharmacists registered with the South African Pharmacy Council. Two knowledge scores were generated by summating correct responses: knowledge of dysphagia (KOD) and knowledge of medicine use (KOMU) in SI patients. Correlation analysis was used to investigate the strength of the relationship between specific variables with KOD and KOMU using the Pearson correlation coefficient. Qualitative semi-structured interviews were conducted with pharmacists from community, hospital and primary healthcare clinics in both a small town and a major metropole. The aim was to gain deeper understanding of issues arising from the survey, and to explore preferences for topic-specific information materials. All interviews were audio-recorded and transcribed verbatim. Thematic analysis was used to analyse the data. A total of 439 pharmacists responded to the survey, with 67% being females.The mean KOD score out of a maximum score of 10 was 6.1 ± 1.8. KOD was inadequate (<5) in just over one-third (37.8%) of pharmacists. The mean KOMU score achieved (maximum score 17) was 9.4 ± 2.0, with inadequate knowledge (<10) being established in just over two-thirds of pharmacists (70.8%). Age, length of registration as a pharmacist, and years of practice in a setting with direct patient interaction were significantly but weakly correlated with KOMU, whereas KOD showed no significant association with these variables. Qualification significantly influenced both KOD and KOMU; the highest group with adequate knowledge had either a Masters or a PharmD degree. Fewer than half the pharmacists (44%) never ask patients about their swallowing ability, and most (86%) reported no knowledge of locally available viscosity enhancers. Almost all pharmacists were interested in receiving information materials on assisting SI patients with their medicine use. Three major themes emerged from the semi-structured interviews. Pharmacists recognised their knowledge deficit and felt that lack of both undergraduate training and formal training during practice, as well as limited exposure to SI patients, were contributing factors. Barriers to their practice with SI patients included lack of time, lack of institutional support and lack of easily accessible references on the pharmacists’ role in supporting medicine use in SI patients. Lastly, most pharmacists were not prepared to take ownership of medicine-related problems in SI patients and had conflicting opinions of the pharmacists’ role, usually shifting the responsibility of medicine use in SI patients to nurses. This is the first study to investigate pharmacist knowledge of medicine use in SI patients. The findings indicate that pharmacists do not have the requisite knowledge when dealing with SI patients and their medicine-taking issues despite being the most highly trained healthcare professionals in this field. Lack of undergraduate training, in-house training and limited exposure to SI patients were reported to contribute to poor knowledge. Current practice revealed that there appears to be poor communication among different healthcare professionals, pharmacists were reluctant to work with and/or train nurses on appropriate medicine use in SI patients, and there appeared to be ambiguity surrounding the role of a pharmacist. This research identified that pharmacists regard this topic to be highly relevant to their everyday practice and are keen to receive more information and training relating to this area of study. Information materials were designed and will be made accessible to all pharmacists registered in South Africa.
- Full Text:
- Date Issued: 2018
Medicine use in swallowing-impaired patients: Pharmacists’ knowledge, practice and information needs
- Authors: Masilamoney, Mehrusha
- Date: 2018
- Subjects: Deglutition disorders , Drugs -- Administration , Oral medication -- Administration , Pharmacists -- Practice , South African Pharmacy Council
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/61940 , vital:28086
- Description: Dysphagia, or swallowing impairment, is a growing problem that affects 13.5% of the general population. The ability to swallow is essential for patients taking oral medicines, so this presents a challenge for swallowing-impaired (SI) patients as tablets and capsules will usually require modification prior to ingestion. Pharmacists should play a central role in advising SI patients about their medicine use, as well as problems that may impact on safety, adherence and therapeutic outcome. However, little is known about pharmacists’ level of knowledge, their practice and their information needs when dealing with SI patients and their use of medicines. The aim of this study was to investigate pharmacist knowledge, practice and information needs relating to the support of SI patients and their medicine-related needs. The study design included both quantitative and qualitative methods. A quantitative questionnaire was developed to collect data on the knowledge, practice and information needs of pharmacists and was piloted in 10 pharmacists, which resulted in minor modifications. The questionnaire was converted to a web-based survey and emailed to all pharmacists registered with the South African Pharmacy Council. Two knowledge scores were generated by summating correct responses: knowledge of dysphagia (KOD) and knowledge of medicine use (KOMU) in SI patients. Correlation analysis was used to investigate the strength of the relationship between specific variables with KOD and KOMU using the Pearson correlation coefficient. Qualitative semi-structured interviews were conducted with pharmacists from community, hospital and primary healthcare clinics in both a small town and a major metropole. The aim was to gain deeper understanding of issues arising from the survey, and to explore preferences for topic-specific information materials. All interviews were audio-recorded and transcribed verbatim. Thematic analysis was used to analyse the data. A total of 439 pharmacists responded to the survey, with 67% being females.The mean KOD score out of a maximum score of 10 was 6.1 ± 1.8. KOD was inadequate (<5) in just over one-third (37.8%) of pharmacists. The mean KOMU score achieved (maximum score 17) was 9.4 ± 2.0, with inadequate knowledge (<10) being established in just over two-thirds of pharmacists (70.8%). Age, length of registration as a pharmacist, and years of practice in a setting with direct patient interaction were significantly but weakly correlated with KOMU, whereas KOD showed no significant association with these variables. Qualification significantly influenced both KOD and KOMU; the highest group with adequate knowledge had either a Masters or a PharmD degree. Fewer than half the pharmacists (44%) never ask patients about their swallowing ability, and most (86%) reported no knowledge of locally available viscosity enhancers. Almost all pharmacists were interested in receiving information materials on assisting SI patients with their medicine use. Three major themes emerged from the semi-structured interviews. Pharmacists recognised their knowledge deficit and felt that lack of both undergraduate training and formal training during practice, as well as limited exposure to SI patients, were contributing factors. Barriers to their practice with SI patients included lack of time, lack of institutional support and lack of easily accessible references on the pharmacists’ role in supporting medicine use in SI patients. Lastly, most pharmacists were not prepared to take ownership of medicine-related problems in SI patients and had conflicting opinions of the pharmacists’ role, usually shifting the responsibility of medicine use in SI patients to nurses. This is the first study to investigate pharmacist knowledge of medicine use in SI patients. The findings indicate that pharmacists do not have the requisite knowledge when dealing with SI patients and their medicine-taking issues despite being the most highly trained healthcare professionals in this field. Lack of undergraduate training, in-house training and limited exposure to SI patients were reported to contribute to poor knowledge. Current practice revealed that there appears to be poor communication among different healthcare professionals, pharmacists were reluctant to work with and/or train nurses on appropriate medicine use in SI patients, and there appeared to be ambiguity surrounding the role of a pharmacist. This research identified that pharmacists regard this topic to be highly relevant to their everyday practice and are keen to receive more information and training relating to this area of study. Information materials were designed and will be made accessible to all pharmacists registered in South Africa.
- Full Text:
- Date Issued: 2018
Evaluation of the acceptability of ambulatory blood pressure monitoring in a semi-rural, Eastern Cape population
- Authors: Chiwanza, Farisai
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/59161 , vital:27447
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
- Authors: Chiwanza, Farisai
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/59161 , vital:27447
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
Microbial water quality monitoring of raw and treated water sources in Harare and the effect of gender in disaster management due to water related disasters
- Authors: Chirenda, Tatenda Grace
- Date: 2017
- Subjects: Drinking water Microbiology Zimbabwe Harare , Heterotrophic bacteria Zimbabwe Harare , Emergency management Zimbabwe Harare , Disasters Social aspects Zimbabwe Harare , Water quality management Zimbabwe Harare , Public health Zimbabwe Harare , Sex role Zimbabwe Harare
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/59156 , vital:27444
- Description: Background - Microbial water quality monitoring is essential to the provision of potable water for domestic use. Unsafe water sources increase the risk of waterborne diseases. There is a need to raise awareness of legislature that supports management of water related disasters. Gender, education, health, and economic vulnerability contribute to the success of disaster management. Aim - This study aimed to investigate the microbial water quality of treated water in the Harare area. The study also researched the microbial water quality monitoring practices in Zimbabwe and how these contribute to the management of water borne diseases. The impact of gender, marriage, education, and disease in disaster management practices in Zimbabwe and South Africa was analysed. Method - Literature review was conducted on microbial water quality monitoring practices in Zimbabwe and legislature that supports disaster management. Practices of disaster management in Zimbabwe, and South Africa were investigated and compared. The perspective of the Harare community on the quality of their potable water was investigated through the use of a questionnaire and water quality testing was conducted using hydrogen sulphide test and R2A based heterotrophic plate count. Raw water supplying Manyame River and tap water in Harare households were assessed for microbial quality. Results and Discussion - Raw water sources were found to be contaminated by faecal matter. Household water sources had no faecal contamination, but tested positive for heterotrophic bacteria. The CFU/ml quantities obtained ranged from 1- 452 CFU/ml for all samples. The WHO guidelines for domestic water sources recommend that domestic water should have no coliforms/100 ml sample. Disaster management protocols were available in disaster prone areas such as the Matabeleland South Province. No guidelines were in place for monitoring microbial water quality as a disaster prevention method. Conclusion - The current state of treated water supplied by the Morton Jaffray Treatment Plant was found to be suitable for domestic use, but not sufficient to meet the Harare population’s needs. The need to push for legislature supporting microbial water quality monitoring was recognised. Initiating public / private partnerships in water distribution and water quality monitoring in Zimbabwe was encouraged.
- Full Text:
- Date Issued: 2017
- Authors: Chirenda, Tatenda Grace
- Date: 2017
- Subjects: Drinking water Microbiology Zimbabwe Harare , Heterotrophic bacteria Zimbabwe Harare , Emergency management Zimbabwe Harare , Disasters Social aspects Zimbabwe Harare , Water quality management Zimbabwe Harare , Public health Zimbabwe Harare , Sex role Zimbabwe Harare
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/59156 , vital:27444
- Description: Background - Microbial water quality monitoring is essential to the provision of potable water for domestic use. Unsafe water sources increase the risk of waterborne diseases. There is a need to raise awareness of legislature that supports management of water related disasters. Gender, education, health, and economic vulnerability contribute to the success of disaster management. Aim - This study aimed to investigate the microbial water quality of treated water in the Harare area. The study also researched the microbial water quality monitoring practices in Zimbabwe and how these contribute to the management of water borne diseases. The impact of gender, marriage, education, and disease in disaster management practices in Zimbabwe and South Africa was analysed. Method - Literature review was conducted on microbial water quality monitoring practices in Zimbabwe and legislature that supports disaster management. Practices of disaster management in Zimbabwe, and South Africa were investigated and compared. The perspective of the Harare community on the quality of their potable water was investigated through the use of a questionnaire and water quality testing was conducted using hydrogen sulphide test and R2A based heterotrophic plate count. Raw water supplying Manyame River and tap water in Harare households were assessed for microbial quality. Results and Discussion - Raw water sources were found to be contaminated by faecal matter. Household water sources had no faecal contamination, but tested positive for heterotrophic bacteria. The CFU/ml quantities obtained ranged from 1- 452 CFU/ml for all samples. The WHO guidelines for domestic water sources recommend that domestic water should have no coliforms/100 ml sample. Disaster management protocols were available in disaster prone areas such as the Matabeleland South Province. No guidelines were in place for monitoring microbial water quality as a disaster prevention method. Conclusion - The current state of treated water supplied by the Morton Jaffray Treatment Plant was found to be suitable for domestic use, but not sufficient to meet the Harare population’s needs. The need to push for legislature supporting microbial water quality monitoring was recognised. Initiating public / private partnerships in water distribution and water quality monitoring in Zimbabwe was encouraged.
- Full Text:
- Date Issued: 2017
Gradient high performance liquid chromatographic method for the simultaneous analysis of efavirenz, emtricitabine and tenofovir
- Authors: Koekemoer, Sonya Mariana
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54679 , vital:26599
- Description: In 2014, approximately 6.8 million people in South Africa were HIV-positive, and the majority of those affected are aged 15 or older. A fixed-dose combination (FDC) antiretroviral (ARV) dosage form containing one non-nucleotide reverse transcriptase inhibitor (efavirenz) and two nucleotide reverse transcriptase inhibitors (emtricitabine and tenofovir) was licensed in South Africa in April 2013. New consolidated guidelines for HIV management and prevention of mother to child transmission (PMTCT) were published by the South African Department of Health in December 2014 and the FDC is now the recommended first-line treatment for HIV-positive patients. According to these guidelines all such people aged 15 and older, and weighing more than 40 kg, with a CD4 count of ≤ 500/ μl will be eligible for antiretroviral therapy (ART) using the FDC. In addition every pregnant and breastfeeding woman is eligible for lifelong ART regardless of CD4 count and EFV can be used as first-line treatment for pregnant women regardless of the length of gestation state of the pregnancy at that time. The use of this simplified regime is likely to promote much needed and improved adherence to therapy. An investigation into the development of a stability-indicating reversed-phase high performance liquid chromatography (RP-HPLC) method for the simultaneous quantitation of EFV, FTC and TNF was undertaken. Isocratic HPLC analysis was found to be unsuitable due to the highly polar FTC molecule eluting in the void. Therefore a gradient HPLC method was developed and validated. The method was validated according to the International Conference on Harmonisation, now known as International Council for Harmonization (ICH). Correlation coefficients > 0.999 were obtained for each assessment of linearity and FTC, TNF and EFV are linear in the range 0.4-40 μg/ml, 0.6-60 μg/ml and 1.2-120 μg/ml. The equation of the best-fit least squares regression lines for FTC, TNF and EFV were y = 0.0191x+0.0007, y = 0.0163x+0.0116 and y = 0.01x+0.016, respectively. The method is accurate as the y-intercept was < 2% of the detector response for all ARV, and the method is precise in terms of intra- and inter-assay precision as all % RSD < 2%. The stability-indicating nature of the method was demonstrated under acidic, alkaline and oxidative stress in addition to UV exposure and elevated temperatures, and the individual chromatograms were overlaid using Empower® 3 Software to establish whether there was interference with the peaks of interest. The forced degradation studies demonstrated the selectivity of the method for the ARV compounds. The method was applied to assay and in vitro dissolution studies of commercially available tablets. The amount of each active ingredient released from Atripla® was determined and compared to the amount of each drug released from Aspen Efavirenz® and Truvada® (a combination of FTC and TNF). The percent FTC released from Atripla® and Truvada® was similar based on the acceptance criteria for immediate-release BCS class 1 compounds. Statistical analysis was undertaken to compare the dissolution profiles of FTC, TNF and EFV. The percent of these compounds released in these studies indicate that bioequivalence testing would be required to declare these products interchangeable. The validated RP-HPLC and in vitro dissolution test method are suitable for routine quality control testing of solid oral dosage forms containing EFV, FTC and TNF, and as the dissolution method can discriminate between different formulations of the same molecule, these tools can also be used for analysis during formulation development studies. The method is not suitable for the analysis of the ARV plasma due to lack of sensitivity and an inability to quantitate the compounds at the required concentration levels. The use of HPLC with mass spectroscopy for quantitation would enhance the sensitivity of the method and may eliminate the quantitation of the molecules in the presence of interference that was observed when using UV detection. Fixed dose combination tablets are convenient for patient therapy and it is likely that in the future more molecules will be formulated into such dosage forms. However formulations such as these can pose significant difficulties when developing and using analytical methods for the quantitation of all compounds in the dosage form at the same time, in particular when the compounds have vastly different physico-chemical properties that impact the quality of a separation and therefore the analysis. Therefore when embarking on the development of FDC product cognisance of the difficulties of developing single methods for the analyses is required and approaches to overcome these difficulties should be considered.
- Full Text:
- Date Issued: 2016
- Authors: Koekemoer, Sonya Mariana
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54679 , vital:26599
- Description: In 2014, approximately 6.8 million people in South Africa were HIV-positive, and the majority of those affected are aged 15 or older. A fixed-dose combination (FDC) antiretroviral (ARV) dosage form containing one non-nucleotide reverse transcriptase inhibitor (efavirenz) and two nucleotide reverse transcriptase inhibitors (emtricitabine and tenofovir) was licensed in South Africa in April 2013. New consolidated guidelines for HIV management and prevention of mother to child transmission (PMTCT) were published by the South African Department of Health in December 2014 and the FDC is now the recommended first-line treatment for HIV-positive patients. According to these guidelines all such people aged 15 and older, and weighing more than 40 kg, with a CD4 count of ≤ 500/ μl will be eligible for antiretroviral therapy (ART) using the FDC. In addition every pregnant and breastfeeding woman is eligible for lifelong ART regardless of CD4 count and EFV can be used as first-line treatment for pregnant women regardless of the length of gestation state of the pregnancy at that time. The use of this simplified regime is likely to promote much needed and improved adherence to therapy. An investigation into the development of a stability-indicating reversed-phase high performance liquid chromatography (RP-HPLC) method for the simultaneous quantitation of EFV, FTC and TNF was undertaken. Isocratic HPLC analysis was found to be unsuitable due to the highly polar FTC molecule eluting in the void. Therefore a gradient HPLC method was developed and validated. The method was validated according to the International Conference on Harmonisation, now known as International Council for Harmonization (ICH). Correlation coefficients > 0.999 were obtained for each assessment of linearity and FTC, TNF and EFV are linear in the range 0.4-40 μg/ml, 0.6-60 μg/ml and 1.2-120 μg/ml. The equation of the best-fit least squares regression lines for FTC, TNF and EFV were y = 0.0191x+0.0007, y = 0.0163x+0.0116 and y = 0.01x+0.016, respectively. The method is accurate as the y-intercept was < 2% of the detector response for all ARV, and the method is precise in terms of intra- and inter-assay precision as all % RSD < 2%. The stability-indicating nature of the method was demonstrated under acidic, alkaline and oxidative stress in addition to UV exposure and elevated temperatures, and the individual chromatograms were overlaid using Empower® 3 Software to establish whether there was interference with the peaks of interest. The forced degradation studies demonstrated the selectivity of the method for the ARV compounds. The method was applied to assay and in vitro dissolution studies of commercially available tablets. The amount of each active ingredient released from Atripla® was determined and compared to the amount of each drug released from Aspen Efavirenz® and Truvada® (a combination of FTC and TNF). The percent FTC released from Atripla® and Truvada® was similar based on the acceptance criteria for immediate-release BCS class 1 compounds. Statistical analysis was undertaken to compare the dissolution profiles of FTC, TNF and EFV. The percent of these compounds released in these studies indicate that bioequivalence testing would be required to declare these products interchangeable. The validated RP-HPLC and in vitro dissolution test method are suitable for routine quality control testing of solid oral dosage forms containing EFV, FTC and TNF, and as the dissolution method can discriminate between different formulations of the same molecule, these tools can also be used for analysis during formulation development studies. The method is not suitable for the analysis of the ARV plasma due to lack of sensitivity and an inability to quantitate the compounds at the required concentration levels. The use of HPLC with mass spectroscopy for quantitation would enhance the sensitivity of the method and may eliminate the quantitation of the molecules in the presence of interference that was observed when using UV detection. Fixed dose combination tablets are convenient for patient therapy and it is likely that in the future more molecules will be formulated into such dosage forms. However formulations such as these can pose significant difficulties when developing and using analytical methods for the quantitation of all compounds in the dosage form at the same time, in particular when the compounds have vastly different physico-chemical properties that impact the quality of a separation and therefore the analysis. Therefore when embarking on the development of FDC product cognisance of the difficulties of developing single methods for the analyses is required and approaches to overcome these difficulties should be considered.
- Full Text:
- Date Issued: 2016
Investigation of α-aryl substituted 3-indolylethanones as potential antiplasmodial agents
- Authors: Svogie, Archibald Lesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/55487 , vital:26704
- Description: According to the World Health Organisation (WHO), deaths attributed to Plasmodium falciparum exceeded 584 000 in 2013, with 198 million new cases of malaria being reported. One contributing factor to these alarming figures is the emergence of drug resistance against available antimalarial agents. Therefore, there is a pressing need to develop new therapeutic antimalarial drugs with novel mechanisms of action in order to curb the increasing spread of malaria. The indole scaffold is often associated with biologically active compounds, recently exemplified by the antimalarial agent NITD609, which is currently in phase 1 clinical trials. Based on the biological evaluation of a small series of indolyl-3-amides and esters which showed moderate antimalarial activity, coupled to significant toxicity, we were prompted to investigate the synthesis of a series of indolyl-3-ethanone-α-amines (3.37 and 3.41), ethers (3.39 and 3.44) and thioethers (3.42, 3.43, 3.40, 3.45 – 3.73), where the carbonyl moiety and respective heteroatom were separated by a methine spacer. We further investigated these compounds for in vitro biological activity against P. falciparum and a human HeLa cell line. Our study explored the synthetic pathway of a three-step procedure toward our target compounds, with the initial Friedel-Crafts acetylation of indole, followed by α-bromination of the respective 3-acetylindoles. Finally, the halogen of the α-bromo ketone was substituted with an appropriate nucleophile, to yield our desired compounds. Various reagents were explored to optimise the nucleophilic displacement step, including potassium carbonate and various silver containing compounds. While many of the silver salts were found to assist in nucleophilic substitution, none were superior to the addition of potassium carbonate. The majority of compounds, chiefly the thioethers, displayed promising antimalarial activity, against the chloroquine sensitive 3D7 P. falciparum strain, with two thioethers in particular (3.54 and 3.65) inhibiting P. falciparum in the low nanomolar range. Additionally, active compounds were generally found to be non-toxic against HeLa cells, indicating that indolyl-3-thioethers are selective for the malaria parasite. These findings allowed us to begin hypothesising a structure activity relationship of this class, as well as elucidating the possible pharmacophore. In a speculative attempt to uncover the possible mechanism of action of these active compounds, in silico docking studies were conducted against Staphylococcus aureus HPPK (PDB ID: 4CRJ), which is an enzyme that immediately precedes DHPS in the microbial folate biosynthesis. Inhibition of folate biosynthesis is a validated selective antimalarial pathway and HPPK also exists in P. falciparum. Results from these docking studies suggested that our inhibitors bound well in the HPPK ATP pocket and were supportive of our hypothesized structure activity relationship.
- Full Text:
- Date Issued: 2016
- Authors: Svogie, Archibald Lesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/55487 , vital:26704
- Description: According to the World Health Organisation (WHO), deaths attributed to Plasmodium falciparum exceeded 584 000 in 2013, with 198 million new cases of malaria being reported. One contributing factor to these alarming figures is the emergence of drug resistance against available antimalarial agents. Therefore, there is a pressing need to develop new therapeutic antimalarial drugs with novel mechanisms of action in order to curb the increasing spread of malaria. The indole scaffold is often associated with biologically active compounds, recently exemplified by the antimalarial agent NITD609, which is currently in phase 1 clinical trials. Based on the biological evaluation of a small series of indolyl-3-amides and esters which showed moderate antimalarial activity, coupled to significant toxicity, we were prompted to investigate the synthesis of a series of indolyl-3-ethanone-α-amines (3.37 and 3.41), ethers (3.39 and 3.44) and thioethers (3.42, 3.43, 3.40, 3.45 – 3.73), where the carbonyl moiety and respective heteroatom were separated by a methine spacer. We further investigated these compounds for in vitro biological activity against P. falciparum and a human HeLa cell line. Our study explored the synthetic pathway of a three-step procedure toward our target compounds, with the initial Friedel-Crafts acetylation of indole, followed by α-bromination of the respective 3-acetylindoles. Finally, the halogen of the α-bromo ketone was substituted with an appropriate nucleophile, to yield our desired compounds. Various reagents were explored to optimise the nucleophilic displacement step, including potassium carbonate and various silver containing compounds. While many of the silver salts were found to assist in nucleophilic substitution, none were superior to the addition of potassium carbonate. The majority of compounds, chiefly the thioethers, displayed promising antimalarial activity, against the chloroquine sensitive 3D7 P. falciparum strain, with two thioethers in particular (3.54 and 3.65) inhibiting P. falciparum in the low nanomolar range. Additionally, active compounds were generally found to be non-toxic against HeLa cells, indicating that indolyl-3-thioethers are selective for the malaria parasite. These findings allowed us to begin hypothesising a structure activity relationship of this class, as well as elucidating the possible pharmacophore. In a speculative attempt to uncover the possible mechanism of action of these active compounds, in silico docking studies were conducted against Staphylococcus aureus HPPK (PDB ID: 4CRJ), which is an enzyme that immediately precedes DHPS in the microbial folate biosynthesis. Inhibition of folate biosynthesis is a validated selective antimalarial pathway and HPPK also exists in P. falciparum. Results from these docking studies suggested that our inhibitors bound well in the HPPK ATP pocket and were supportive of our hypothesized structure activity relationship.
- Full Text:
- Date Issued: 2016
An investigation into the feasibility of incorporating ketoconazole into solid lipid microparticles
- Authors: Jhundoo, Henusha Devi
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54701 , vital:26601
- Description: One of the major challenges of the oral administration of ketoconazole (KTZ), an inhibitor of sterol 14α demethylase, used in the management of systemic and topical mycoses in immuno-compromised and paediatric patients is the lack of availability of liquid dosage forms. In order to overcome this challenge, extemporaneous preparations have been manufactured by care-givers and health care providers by crushing or breaking solid oral dosage forms of KTZ and mixing with a vehicle to produce a liquid dosage form that can be swallowed by patients. However, the use of extemporaneous preparations may lead to under or over-dosing if the care-givers are not guided accordingly. Furthermore, the dearth of information on the stability of these KTZ-containing extemporaneous preparations may lead to ineffective antifungal therapy and complicate the problems of resistance as it is difficult to estimate the shelf-lives of these extemporaneous products under varying storage conditions due to the susceptibility of KTZ to chemical degradation. Therefore, there is a need for formulation scientists to develop novel drug delivery systems that avoid the need for extemporaneous preparations, possess well-established limits of stability and minimize the risks of systemic adverse effects to facilitate KTZ therapy. The use of solid lipid microparticles (SLM) as potential carriers for the oral administration of KTZ was investigated since solid lipid carriers are known to exhibit the advantages of traditional colloidal carriers. The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing solid lipid microparticles (SLM), using a simple micro-emulsion technique, as a carrier for KTZ. Prior to pre-formulation, formulation development and optimization studies of KTZ-loaded SLM, it was necessary to develop and validate an analytical method for the in vitro quantitation and characterization of KTZ in aqueous dispersions of SLM during development and assessment studies. An accurate, precise, specific and sensitive reversed-phase high performance liquid chromatographic (RP-HPLC) method coupled with UV detection at 206 nm was developed, optimized and validated for the analysis of KTZ in formulations. Formulation development studies were preceded by solubility studies of KTZ in different lipids. Labrafil® M2130 CS was found to exhibit the best solubilising potential for KTZ. Pre-formulation studies were also designed to determine the polymorphic behavior and the crystallinity of KTZ and Labrafil® M2130 CS that was used for subsequent manufacture of the solid lipid carriers. DSC and FTIR studies revealed that there were no changes in the crystallinity of KTZ or Labrafil® M2130 CS following exposure to a temperature of 60°C for 1 hour. In addition the potential for physicochemical interaction of KTZ with the lipid Labrafil® M2130 CS was investigated using DSC and FTIR and the results revealed that KTZ was molecularly dispersed in Labrafil® M2130 CS and that it is unlikely that KTZ would interact with the lipid. It was therefore established that KTZ and Labrafil® M2130 CS were thermo-stable at a temperature of 60°C and thus a micro-emulsion technique could be used to manufacture the KTZ-loaded SLM. Drug-free and KTZ-loaded SLM were prepared using a modified micro-emulsion technique that required the use of an Ultra-Turrax® homogenizer set at 24 000 rpm for 5 minutes followed by the use of the Erweka GmbH homogenizer. SLM were characterized in terms of particle size (PS), zeta potential (ZP), shape and surface morphology using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In addition drug loading capacity (DLC) and encapsulation efficiency (EE) of SLM for KTZ were assessed using RP-HPLC. Formulation development and optimization studies of KTZ-loaded SLM were initially aimed at selecting an emulsifying system that was able to stabilize the SLM in an aqueous dispersion. Successful formulations were selected based on their ability to remain physically stable on the day of manufacture. Pluronic® F68 used in combination with Lutrol® E40, Soluphor® P, Soluplus® produced unstable dispersions on the day of manufacture and these combinations were not investigated further. However, the formulation of a stable KTZ-loaded SLM dispersion was accomplished by use of a combination of Pluronic® F68, Tween 80 and sodium cholate as the surfactant system. Increasing amounts of Labrafil® M2130 CS resulted in the production of particles with low DLC and EE, a large PS and a relatively unchanged ZP. An optimum concentration of 10% w/v Labrafil® M2130 CS was selected to manufacture the KTZ-loaded SLM. Studies to determine the influence of KTZ loading on the quality of SLM revealed that concentrations of KTZ > 5% w/v led to a reduction in DLC and EE and an increase in PS with minimal impact on the ZP. Stability studies conducted at 25°C/65% RH and 40°C/75% RH for up to 30 days following manufacture revealed that batch SLM 15 manufactured using 10% w/v Labrafil® M2130 CS, 5% w/v KTZ and a combination of 4% w/v Pluronic® F-68, 2% w/v Tween 80 and 1% w/v sodium cholate produced the most stable dosage form when stored at 25°C/65% RH for up to 30 days. However, storage at 40°C/75% RH resulted in instability of the formulation. An aqueous dispersion of KTZ-loaded SLM has been developed and assessed and may offer an alternative to extemporaneous preparations used for KTZ therapy in paediatric and immuno-compromised patients.
- Full Text:
- Date Issued: 2015
- Authors: Jhundoo, Henusha Devi
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54701 , vital:26601
- Description: One of the major challenges of the oral administration of ketoconazole (KTZ), an inhibitor of sterol 14α demethylase, used in the management of systemic and topical mycoses in immuno-compromised and paediatric patients is the lack of availability of liquid dosage forms. In order to overcome this challenge, extemporaneous preparations have been manufactured by care-givers and health care providers by crushing or breaking solid oral dosage forms of KTZ and mixing with a vehicle to produce a liquid dosage form that can be swallowed by patients. However, the use of extemporaneous preparations may lead to under or over-dosing if the care-givers are not guided accordingly. Furthermore, the dearth of information on the stability of these KTZ-containing extemporaneous preparations may lead to ineffective antifungal therapy and complicate the problems of resistance as it is difficult to estimate the shelf-lives of these extemporaneous products under varying storage conditions due to the susceptibility of KTZ to chemical degradation. Therefore, there is a need for formulation scientists to develop novel drug delivery systems that avoid the need for extemporaneous preparations, possess well-established limits of stability and minimize the risks of systemic adverse effects to facilitate KTZ therapy. The use of solid lipid microparticles (SLM) as potential carriers for the oral administration of KTZ was investigated since solid lipid carriers are known to exhibit the advantages of traditional colloidal carriers. The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing solid lipid microparticles (SLM), using a simple micro-emulsion technique, as a carrier for KTZ. Prior to pre-formulation, formulation development and optimization studies of KTZ-loaded SLM, it was necessary to develop and validate an analytical method for the in vitro quantitation and characterization of KTZ in aqueous dispersions of SLM during development and assessment studies. An accurate, precise, specific and sensitive reversed-phase high performance liquid chromatographic (RP-HPLC) method coupled with UV detection at 206 nm was developed, optimized and validated for the analysis of KTZ in formulations. Formulation development studies were preceded by solubility studies of KTZ in different lipids. Labrafil® M2130 CS was found to exhibit the best solubilising potential for KTZ. Pre-formulation studies were also designed to determine the polymorphic behavior and the crystallinity of KTZ and Labrafil® M2130 CS that was used for subsequent manufacture of the solid lipid carriers. DSC and FTIR studies revealed that there were no changes in the crystallinity of KTZ or Labrafil® M2130 CS following exposure to a temperature of 60°C for 1 hour. In addition the potential for physicochemical interaction of KTZ with the lipid Labrafil® M2130 CS was investigated using DSC and FTIR and the results revealed that KTZ was molecularly dispersed in Labrafil® M2130 CS and that it is unlikely that KTZ would interact with the lipid. It was therefore established that KTZ and Labrafil® M2130 CS were thermo-stable at a temperature of 60°C and thus a micro-emulsion technique could be used to manufacture the KTZ-loaded SLM. Drug-free and KTZ-loaded SLM were prepared using a modified micro-emulsion technique that required the use of an Ultra-Turrax® homogenizer set at 24 000 rpm for 5 minutes followed by the use of the Erweka GmbH homogenizer. SLM were characterized in terms of particle size (PS), zeta potential (ZP), shape and surface morphology using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In addition drug loading capacity (DLC) and encapsulation efficiency (EE) of SLM for KTZ were assessed using RP-HPLC. Formulation development and optimization studies of KTZ-loaded SLM were initially aimed at selecting an emulsifying system that was able to stabilize the SLM in an aqueous dispersion. Successful formulations were selected based on their ability to remain physically stable on the day of manufacture. Pluronic® F68 used in combination with Lutrol® E40, Soluphor® P, Soluplus® produced unstable dispersions on the day of manufacture and these combinations were not investigated further. However, the formulation of a stable KTZ-loaded SLM dispersion was accomplished by use of a combination of Pluronic® F68, Tween 80 and sodium cholate as the surfactant system. Increasing amounts of Labrafil® M2130 CS resulted in the production of particles with low DLC and EE, a large PS and a relatively unchanged ZP. An optimum concentration of 10% w/v Labrafil® M2130 CS was selected to manufacture the KTZ-loaded SLM. Studies to determine the influence of KTZ loading on the quality of SLM revealed that concentrations of KTZ > 5% w/v led to a reduction in DLC and EE and an increase in PS with minimal impact on the ZP. Stability studies conducted at 25°C/65% RH and 40°C/75% RH for up to 30 days following manufacture revealed that batch SLM 15 manufactured using 10% w/v Labrafil® M2130 CS, 5% w/v KTZ and a combination of 4% w/v Pluronic® F-68, 2% w/v Tween 80 and 1% w/v sodium cholate produced the most stable dosage form when stored at 25°C/65% RH for up to 30 days. However, storage at 40°C/75% RH resulted in instability of the formulation. An aqueous dispersion of KTZ-loaded SLM has been developed and assessed and may offer an alternative to extemporaneous preparations used for KTZ therapy in paediatric and immuno-compromised patients.
- Full Text:
- Date Issued: 2015
Development and manufacture of sustained release captopril beads
- Authors: Mhaka, Farai Arthur
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54712 , vital:26602
- Description: Hypertension has a high mortality rate in developing countries such as South Africa. Although the prevention and control of hypertension is a health priority, efforts to decrease the global burden of hypertension and improve control over the condition are inadequate. The use of angiotensin converting enzyme (ACE) inhibitors such as captopril (CPT) have been effective for the management of hypertension when used as first line therapy alone or in combination. Commercially available immediate release dosage forms containing 12.5, 25 and 50 mg of CPT are administered two or three times a day to treat hypertension. CPT degrades in aqueous media with the sulfhydryl functional moiety responsible for adverse effects such as hypersensitivity, taste disturbances and/or presenting with a dry hacking cough. CPT has a short elimination half-life of between 1.6 and 1.9 hours, which means that the compound is a suitable candidate for inclusion in sustained release (SR) dosage forms. Manufacturing a SR dosage form of coated beads for twice daily dosing may reduce the incidence and intensity of undesirable adverse effects, improve the stability of CPT and improve patient adherence. A stability indicating reversed-phase high performance liquid chromatographic (RP-HPLC) method was developed and optimised using a central composite design approach. As part of this approach the interactive effects of input factors, viz. pH, methanol (MeOH) content and column temperature on retention time, were investigated to achieve a separation with well-resolved and symmetrical peaks for CPT and salicylic acid. The method was validated using ICH guidelines and was found to be simple, linear, precise, accurate, selective and rapid for the in vitro quantitation of CPT. The method was successfully applied for the analysis of both commercially available and test formulations. Preformulation studies were undertaken to establish the physical and chemical properties of CPT, excipients and dosage forms to ensure the production of stabile and bioavailable products. Powder blends were assessed for flow properties using angle of repose (AOR), and bulk and tapped density, which were subsequently used to calculate Carr’s Index (CI) and the Hausner ratio (HR). The addition of talc resulted in the most powder blends with AOR, CI and HR that were within a range indicative of satisfactory to good flow properties. The use of talc was necessary to ensure that blending prior to wet granulation and extrusion-spheronisation would produce homogenous powders. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FT-IR) were used for the identification and purity of CPT alone and 1:1 binary mixtures with excipients in an effort to establish if CPT was likely to undergo physical and/or chemical modification during production. The DSC thermograms for all CPT-excipient mixtures revealed the presence of a melting endotherm that was wider, occurring at 110.93 °C (Tpeak for pure CPT). The characteristic peaks for specific functional groups were present in the FT-IR spectra for powder mixtures, indicating the absence of incompatibilities. Dialysis studies were used to investigate if the ammonium oleate present in Surelease® E-7-19010 interacted with CPT. The results suggests that an interaction between CPT and Surelease® E-7-19010 during processing of CPT beads was unlikely to occur. Preliminary investigations reveal that Methocel® K100M, Methocel® E4M, Avicel® PH102, Eudragit® RS PO, Surelease® E-7-19010 and talc are compatible with CPT and could be used for the manufacture of SR CPT beads. CPT beads were manufactured using extrusion-spheronisation and coated using a fluidised bed drier fitted with a Wurster insert. The amount of granulating fluid, coating levels, curing time and formulation composition were varied to achieve CPT release with specific criteria to develop a preliminary formulation. The coated beads met all desired quality attributes in respect of micromeritic and flow properties, content uniformity and friability. Response Surface Methodology was used to further optimise the SR CPT formulation. The Plackett-Burman design was used for this process to produce an SR dosage form with desirable quality attributes achieved by altering formulation composition, extrusion-spheronisation variables and coating parameters. ANOVA data revealed significant responses for yield, aspect ratio, sphericity, coating efficiency and cumulative percent CPT released at 2 and 12 hours. Formulations in which the high molecular weight HPMC were used in increased concentrations resulted in the formation of a sticky wet mass and extrudate, resulting in a decrease in yield. The application of a permeable, but insoluble Surelease® coat onto the surface of the beads formed a barrier that complements the activity of the hydrophilic matrix in preventing rapid dissolution and retarding the release of CPT from the beads. The amount of CPT released over 12 hours revealed that increasing the Methocel® K100M content entrapped CPT and retained it more efficiently in the hydrated matrix, resulting in a slow rate of CPT release. In vitro release data were fitted to a number of models in an attempt to elucidate mechanistic aspects of transport processes specific to CPT from the coated bead formulations. The results of fitting data from optimised batches revealed that the goodness of fit based on the adjusted correlation coefficient ranged between 0.953 and 0.976 for the Higuchi model, indicating that diffusion is a predominant factor that controls CPT release from the coated beads. The results of fitting data to the Korsmeyer-Peppas model suggest that the mechanism of CPT release includes transport of the dissolution medium from the vessel reservoir into the core of the bead due to osmotic potential, dissolution of CPT, mass transfer of the dissolved CPT within the core, partitioning between the solution and polymeric film, mass transfer of dissolved CPT through the film to ultimately reach the bulk dissolution fluid. A SR CPT bead formulation that has potential for further development and optimisation for scaled-up production using RSM approaches and Design of Experiments such as CCD or Box-Behnken has been successfully developed and manufactured using extrusion, spheronisation and coating processes. Assessment of all batches of beads manufactured exhibited satisfactory to good flow properties and demonstrated SR profiles over 12 hours that met USP criteria for SR dosage forms.
- Full Text:
- Date Issued: 2015
- Authors: Mhaka, Farai Arthur
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54712 , vital:26602
- Description: Hypertension has a high mortality rate in developing countries such as South Africa. Although the prevention and control of hypertension is a health priority, efforts to decrease the global burden of hypertension and improve control over the condition are inadequate. The use of angiotensin converting enzyme (ACE) inhibitors such as captopril (CPT) have been effective for the management of hypertension when used as first line therapy alone or in combination. Commercially available immediate release dosage forms containing 12.5, 25 and 50 mg of CPT are administered two or three times a day to treat hypertension. CPT degrades in aqueous media with the sulfhydryl functional moiety responsible for adverse effects such as hypersensitivity, taste disturbances and/or presenting with a dry hacking cough. CPT has a short elimination half-life of between 1.6 and 1.9 hours, which means that the compound is a suitable candidate for inclusion in sustained release (SR) dosage forms. Manufacturing a SR dosage form of coated beads for twice daily dosing may reduce the incidence and intensity of undesirable adverse effects, improve the stability of CPT and improve patient adherence. A stability indicating reversed-phase high performance liquid chromatographic (RP-HPLC) method was developed and optimised using a central composite design approach. As part of this approach the interactive effects of input factors, viz. pH, methanol (MeOH) content and column temperature on retention time, were investigated to achieve a separation with well-resolved and symmetrical peaks for CPT and salicylic acid. The method was validated using ICH guidelines and was found to be simple, linear, precise, accurate, selective and rapid for the in vitro quantitation of CPT. The method was successfully applied for the analysis of both commercially available and test formulations. Preformulation studies were undertaken to establish the physical and chemical properties of CPT, excipients and dosage forms to ensure the production of stabile and bioavailable products. Powder blends were assessed for flow properties using angle of repose (AOR), and bulk and tapped density, which were subsequently used to calculate Carr’s Index (CI) and the Hausner ratio (HR). The addition of talc resulted in the most powder blends with AOR, CI and HR that were within a range indicative of satisfactory to good flow properties. The use of talc was necessary to ensure that blending prior to wet granulation and extrusion-spheronisation would produce homogenous powders. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FT-IR) were used for the identification and purity of CPT alone and 1:1 binary mixtures with excipients in an effort to establish if CPT was likely to undergo physical and/or chemical modification during production. The DSC thermograms for all CPT-excipient mixtures revealed the presence of a melting endotherm that was wider, occurring at 110.93 °C (Tpeak for pure CPT). The characteristic peaks for specific functional groups were present in the FT-IR spectra for powder mixtures, indicating the absence of incompatibilities. Dialysis studies were used to investigate if the ammonium oleate present in Surelease® E-7-19010 interacted with CPT. The results suggests that an interaction between CPT and Surelease® E-7-19010 during processing of CPT beads was unlikely to occur. Preliminary investigations reveal that Methocel® K100M, Methocel® E4M, Avicel® PH102, Eudragit® RS PO, Surelease® E-7-19010 and talc are compatible with CPT and could be used for the manufacture of SR CPT beads. CPT beads were manufactured using extrusion-spheronisation and coated using a fluidised bed drier fitted with a Wurster insert. The amount of granulating fluid, coating levels, curing time and formulation composition were varied to achieve CPT release with specific criteria to develop a preliminary formulation. The coated beads met all desired quality attributes in respect of micromeritic and flow properties, content uniformity and friability. Response Surface Methodology was used to further optimise the SR CPT formulation. The Plackett-Burman design was used for this process to produce an SR dosage form with desirable quality attributes achieved by altering formulation composition, extrusion-spheronisation variables and coating parameters. ANOVA data revealed significant responses for yield, aspect ratio, sphericity, coating efficiency and cumulative percent CPT released at 2 and 12 hours. Formulations in which the high molecular weight HPMC were used in increased concentrations resulted in the formation of a sticky wet mass and extrudate, resulting in a decrease in yield. The application of a permeable, but insoluble Surelease® coat onto the surface of the beads formed a barrier that complements the activity of the hydrophilic matrix in preventing rapid dissolution and retarding the release of CPT from the beads. The amount of CPT released over 12 hours revealed that increasing the Methocel® K100M content entrapped CPT and retained it more efficiently in the hydrated matrix, resulting in a slow rate of CPT release. In vitro release data were fitted to a number of models in an attempt to elucidate mechanistic aspects of transport processes specific to CPT from the coated bead formulations. The results of fitting data from optimised batches revealed that the goodness of fit based on the adjusted correlation coefficient ranged between 0.953 and 0.976 for the Higuchi model, indicating that diffusion is a predominant factor that controls CPT release from the coated beads. The results of fitting data to the Korsmeyer-Peppas model suggest that the mechanism of CPT release includes transport of the dissolution medium from the vessel reservoir into the core of the bead due to osmotic potential, dissolution of CPT, mass transfer of the dissolved CPT within the core, partitioning between the solution and polymeric film, mass transfer of dissolved CPT through the film to ultimately reach the bulk dissolution fluid. A SR CPT bead formulation that has potential for further development and optimisation for scaled-up production using RSM approaches and Design of Experiments such as CCD or Box-Behnken has been successfully developed and manufactured using extrusion, spheronisation and coating processes. Assessment of all batches of beads manufactured exhibited satisfactory to good flow properties and demonstrated SR profiles over 12 hours that met USP criteria for SR dosage forms.
- Full Text:
- Date Issued: 2015
Formulation, development and assessment of tenofovir disoproxil fumarate-loaded pellets
- Authors: Dube, Tawanda
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54690 , vital:26600
- Description: Tenofovir disoproxil fumarate (TDF) is a novel nucleotide analog reverse transcriptase inhibitor that is recommended by the WHO for use in first line treatment of HIV infections. Due to the high dose of TDF for anti-retroviral treatment the formulation of a pellet dosage form may improve patient adherence by incorporation of a large dose in a relatively small dosage form. TDF is currently only available in tablet form. A simple, sensitive, selective, rapid, accurate, precise, stability indicating reversed-phase HPLC method was developed and validated in accordance with ICH guidelines and was successfully used for the analysis of TDF raw material and pharmaceutical dosage forms. Preformulation studies included an investigation of TDF-excipient and excipient-excipient interactions with all materials that could potentially be used to produce extruded and spheronized pellets. Nuclear Magnetic Resonance spectroscopy (NMR), Infrared Spectroscopy (IR), Differential Scanning Colorimetry (DSC) and Thermogravimetric analysis were used for identification and purity testing of TDF and all excipients. DSC data revealed that no potential interactions between TDF and the excipients occurred suggesting that incompatibility reactions were unlikely during manufacture and storage. These findings were confirmed by IR analysis that revealed that no physical interaction was likely between any of the excipients used and TDF. DSC data also reveal the existence of the α and β-polymorphs of TDF as evidenced by two enthalpy changes observed on the resultant thermograms. The existence of two polymorphs is unlikely to result in incompatibility and was confirmed by IR analysis. The IR spectra reveal that all characteristic peaks for TDF were present in 1:1 binary mixtures. Therefore TDF is compatible with all excipients tested and thermal analysis confirmed the stability of TDF under manufacturing conditions. The temperature of degradation temperature established through DSC analysis confirmed that degradation during manufacture is unlikely as the temperature of manufacture is lower than that at which degradation occurs. Extrusion and spheronization were the processes used to manufacture TDF pellets as it is a simple and economic approach for production. The effects of extruder and spheronizer speed, amount of spheronization aid and diluents on the pellet size, shape, flow properties and TDF release characteristics were examined. In order to decrease the complexity of analysis and reduce the cost of development a Taguchi orthogonal array design of experiments was successfully applied to evaluate the impact of formulation variables on product characteristics and predict an optimized formulation with a minimum number of experiments. The use of Response Surface Methodology for the development and optimization of pharmaceutical systems, including the optimization of formulation composition, manufacturing processes and/or analytical methods is well established. However the application of RSM requires that accurate, precise and reproducible experimental conditions are used for the generation of reliable data and RSM use is limited due to sensitivity to experimental variability. The benefits of using RSM for formulation optimization include the fact that more than one variable can be investigated at a time and large amounts of information can be generated at the same time ensuring a more efficient process with respect to time and cost. An added advantage of this approach is that mathematical relationships can be generated for the models that are produced and provide formulation scientists with an indication of whether the effect(s) between factors are synergistic or antagonistic. There are several statistical design approaches that use RSM and a Taguchi orthogonal array design was selected for use in this optimization process as fewer experiments are required to generate data for the same number of factors to be investigated when compared to other statistical designs such as Central Composite (CCD) and Box-Behnken designs. The use of RSM clearly demonstrates the impact of different input variables on the % TDF released at 45 min and % TDF loaded into the particles. The amount of sorbitol and Kollidon® CL-M were the only significant variables that affected the % TDF released at 45 min and both excipients had an overall synergistic effect on the in vitro release of TDF. The prediction and manufacture of an optimized formulation led to the production of pellets that met predetermined specifications which was successfully achieved using RSM. The development of a TDF containing pellet dosage form has been achieved and the formulation, manufacture and characterization of the dosage form reveal that the product has the potential to be further developed.
- Full Text:
- Date Issued: 2015
- Authors: Dube, Tawanda
- Date: 2015
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54690 , vital:26600
- Description: Tenofovir disoproxil fumarate (TDF) is a novel nucleotide analog reverse transcriptase inhibitor that is recommended by the WHO for use in first line treatment of HIV infections. Due to the high dose of TDF for anti-retroviral treatment the formulation of a pellet dosage form may improve patient adherence by incorporation of a large dose in a relatively small dosage form. TDF is currently only available in tablet form. A simple, sensitive, selective, rapid, accurate, precise, stability indicating reversed-phase HPLC method was developed and validated in accordance with ICH guidelines and was successfully used for the analysis of TDF raw material and pharmaceutical dosage forms. Preformulation studies included an investigation of TDF-excipient and excipient-excipient interactions with all materials that could potentially be used to produce extruded and spheronized pellets. Nuclear Magnetic Resonance spectroscopy (NMR), Infrared Spectroscopy (IR), Differential Scanning Colorimetry (DSC) and Thermogravimetric analysis were used for identification and purity testing of TDF and all excipients. DSC data revealed that no potential interactions between TDF and the excipients occurred suggesting that incompatibility reactions were unlikely during manufacture and storage. These findings were confirmed by IR analysis that revealed that no physical interaction was likely between any of the excipients used and TDF. DSC data also reveal the existence of the α and β-polymorphs of TDF as evidenced by two enthalpy changes observed on the resultant thermograms. The existence of two polymorphs is unlikely to result in incompatibility and was confirmed by IR analysis. The IR spectra reveal that all characteristic peaks for TDF were present in 1:1 binary mixtures. Therefore TDF is compatible with all excipients tested and thermal analysis confirmed the stability of TDF under manufacturing conditions. The temperature of degradation temperature established through DSC analysis confirmed that degradation during manufacture is unlikely as the temperature of manufacture is lower than that at which degradation occurs. Extrusion and spheronization were the processes used to manufacture TDF pellets as it is a simple and economic approach for production. The effects of extruder and spheronizer speed, amount of spheronization aid and diluents on the pellet size, shape, flow properties and TDF release characteristics were examined. In order to decrease the complexity of analysis and reduce the cost of development a Taguchi orthogonal array design of experiments was successfully applied to evaluate the impact of formulation variables on product characteristics and predict an optimized formulation with a minimum number of experiments. The use of Response Surface Methodology for the development and optimization of pharmaceutical systems, including the optimization of formulation composition, manufacturing processes and/or analytical methods is well established. However the application of RSM requires that accurate, precise and reproducible experimental conditions are used for the generation of reliable data and RSM use is limited due to sensitivity to experimental variability. The benefits of using RSM for formulation optimization include the fact that more than one variable can be investigated at a time and large amounts of information can be generated at the same time ensuring a more efficient process with respect to time and cost. An added advantage of this approach is that mathematical relationships can be generated for the models that are produced and provide formulation scientists with an indication of whether the effect(s) between factors are synergistic or antagonistic. There are several statistical design approaches that use RSM and a Taguchi orthogonal array design was selected for use in this optimization process as fewer experiments are required to generate data for the same number of factors to be investigated when compared to other statistical designs such as Central Composite (CCD) and Box-Behnken designs. The use of RSM clearly demonstrates the impact of different input variables on the % TDF released at 45 min and % TDF loaded into the particles. The amount of sorbitol and Kollidon® CL-M were the only significant variables that affected the % TDF released at 45 min and both excipients had an overall synergistic effect on the in vitro release of TDF. The prediction and manufacture of an optimized formulation led to the production of pellets that met predetermined specifications which was successfully achieved using RSM. The development of a TDF containing pellet dosage form has been achieved and the formulation, manufacture and characterization of the dosage form reveal that the product has the potential to be further developed.
- Full Text:
- Date Issued: 2015
Adolescent pregnancy: a community engaged participatory approach to design and implement an educational intervention
- Authors: Siruma, Amanda Tatenda
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54656 , vital:26597
- Description: Millennium Development Goal (MDG) 5 focuses on improving maternal health, due to global acknowledgment that no woman should have to die as a result of complications during pregnancy and childbirth. Adolescents have an increased risk of maternal death compared with older women. Adolescent pregnancy also poses a threat to the empowerment of young girls by mitigating their physical, educational, social, and economic development. In this context, maternal health promotion strategies which inclusively target adolescents are crucial, not only in improving maternal health outcomes, but also in optimising the overall transition of adolescent girls to adulthood. This study was a first time collaborative partnership of the Faculty of Pharmacy and Community Engagement Office of Rhodes University with the Angus Gillis Foundation (a non-profit community development organisation), and community participants of Glenmore and Ndwayana, two rural communities in the Eastern Cape. The aim of this study was to identify the maternal health issue of most concern to community participants and to design and implement an appropriate educational intervention for a suitable target group. During the baseline phase of this study, ten focus group discussions (FGDs) were conducted with 76 community stakeholders. Semi-structured interviews (SSIs) were conducted with two Sisters-in-Charge from each Primary Health Care (PHC) facility in the study setting. Data on the stock status of World Health Organization (WHO) identified lifesaving priority medicines for women’s health was also collected at both PHCs. Thereafter, pre- and posteducational interventions SSIs with female adolescent participants were conducted. The educational intervention was followed up with the development of a booklet on reproductive health. FGD participants identified adolescent pregnancy as the maternal health issue of most concern. They also highlighted challenges in service delivery of ambulance services for expectant mothers in urgent need of transportation to a referral hospital. A majority of preintervention SSI participants indicated coercion from both younger and older men as a factor influencing early sexual debut amongst adolescent girls in their communities. Despite availability in the PHCs, challenges in accessing contraceptives were highlighted by the participants. Additionally, a number of sexually active adolescent girls defaulted on their next allocated visit to the PHC due to myths regarding use of oral and injectable contraceptives. During the educational intervention sessions, participants recognised knowledge gaps regarding reproductive health issues and the influence of peer pressure as constraining factors in preventing adolescent pregnancy. During the post-intervention phase, participants highlighted that the educational intervention of this study had provided a forum to discuss ways of preventing adolescent pregnancy. The educational booklet developed is intended to serve as a resource tool of the educational programme on prevention of adolescent pregnancy, which is expected to be incorporated into the Angus Gillis Foundation’s existing ‘Positive Health’ Programme. The results of this study show that community-based participatory research facilitated the identification of the maternal health issue of most concern to these communities. Working synergistically with key stakeholders in designing and implementing an educational intervention for preventing adolescent pregnancy provides a good foundation for future up scaling and sustainability of this educational programme.
- Full Text:
- Date Issued: 2014
- Authors: Siruma, Amanda Tatenda
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54656 , vital:26597
- Description: Millennium Development Goal (MDG) 5 focuses on improving maternal health, due to global acknowledgment that no woman should have to die as a result of complications during pregnancy and childbirth. Adolescents have an increased risk of maternal death compared with older women. Adolescent pregnancy also poses a threat to the empowerment of young girls by mitigating their physical, educational, social, and economic development. In this context, maternal health promotion strategies which inclusively target adolescents are crucial, not only in improving maternal health outcomes, but also in optimising the overall transition of adolescent girls to adulthood. This study was a first time collaborative partnership of the Faculty of Pharmacy and Community Engagement Office of Rhodes University with the Angus Gillis Foundation (a non-profit community development organisation), and community participants of Glenmore and Ndwayana, two rural communities in the Eastern Cape. The aim of this study was to identify the maternal health issue of most concern to community participants and to design and implement an appropriate educational intervention for a suitable target group. During the baseline phase of this study, ten focus group discussions (FGDs) were conducted with 76 community stakeholders. Semi-structured interviews (SSIs) were conducted with two Sisters-in-Charge from each Primary Health Care (PHC) facility in the study setting. Data on the stock status of World Health Organization (WHO) identified lifesaving priority medicines for women’s health was also collected at both PHCs. Thereafter, pre- and posteducational interventions SSIs with female adolescent participants were conducted. The educational intervention was followed up with the development of a booklet on reproductive health. FGD participants identified adolescent pregnancy as the maternal health issue of most concern. They also highlighted challenges in service delivery of ambulance services for expectant mothers in urgent need of transportation to a referral hospital. A majority of preintervention SSI participants indicated coercion from both younger and older men as a factor influencing early sexual debut amongst adolescent girls in their communities. Despite availability in the PHCs, challenges in accessing contraceptives were highlighted by the participants. Additionally, a number of sexually active adolescent girls defaulted on their next allocated visit to the PHC due to myths regarding use of oral and injectable contraceptives. During the educational intervention sessions, participants recognised knowledge gaps regarding reproductive health issues and the influence of peer pressure as constraining factors in preventing adolescent pregnancy. During the post-intervention phase, participants highlighted that the educational intervention of this study had provided a forum to discuss ways of preventing adolescent pregnancy. The educational booklet developed is intended to serve as a resource tool of the educational programme on prevention of adolescent pregnancy, which is expected to be incorporated into the Angus Gillis Foundation’s existing ‘Positive Health’ Programme. The results of this study show that community-based participatory research facilitated the identification of the maternal health issue of most concern to these communities. Working synergistically with key stakeholders in designing and implementing an educational intervention for preventing adolescent pregnancy provides a good foundation for future up scaling and sustainability of this educational programme.
- Full Text:
- Date Issued: 2014
Development and assessment of sustained release stavudine loaded microparticles
- Authors: Zindove, Chiedza Cathrine
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54722 , vital:26603
- Description:
Stavudine (D4T) has been used as first line treatment for HIV/AIDS and is part of highly active anti retroviral treatment (HAART). It is an affordable medicine and its use is beneficial in resource limited settings. However D4T exhibits dose dependent side effects that may lead to non-adherence in patients. This study was undertaken to formulate, develop and manufacture a dosage form that could reduce dose dependent side effects by decreasing the dose of D4T but still exhibit antiretroviral (ARV) activity. The use of sustained release (SR) formulations of D4T that ensure constant levels of the D4T in the body would not only optimize therapy but also reduce the incidence of side effects thereby increasing patient adherence. SR microparticles containing 30mg D4T were manufactured and loaded into size 3 hard gelatine capsules prior to analysis. The D4T microparticles were manufactured by microencapsulation using non-aqueous oil-in-oil solvent evaporation approach. D4T-excipient, excipient-excipient interactions and D4T purity were assessed using Infrared Spectroscopy (IR), Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Copolymers synthesized from acrylic and methacrylic acid esters viz., Eudragit® RSPO and S100 were used as rate retardant materials and the effect of microcrystalline cellulose (Avicel® PH102) on the microparticles was also investigated. Magnesium stearate was used as a droplet stabilizer and n-hexane was added to harden the microspheres formed in a liquid paraffin continuous phase. The microparticles were optimized using a Box Behnken design and Response Surface Methodology (RSM). The microparticles were characterized in terms of their flow properties and encapsulation efficiency (% EE), in addition to visualization of the surface morphology with Scanning Electron Microscopy. In vitro D4T release studies were performed using USP Apparatus III in media of different pH and the samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection that had been developed and optimized using a Central Composite Design (CCD). The method was validated according to ICH guidelines. The IR spectra and DSC thermographs revealed that D4T exhibited thermal stability and there was no evidence of D4T-excipient and excipient-excipient interactions. The microparticles that were produced were white, free flowing and were obtained in a high yield with high encapsulation efficiency. Scanning Electron Microscopy studies revealed that the microparticles were spherical and porous in nature. In vitro D4T release extended to 12 hours and the mechanism of release was established using model dependent methods by fitting the data to a Zero order, First order, Higuchi and Hixson Crowell model. It was observed that the mechanism of D4T release was diffusion-controlled and that the data was best fitted to the Higuchi model with correlation coefficients > 0.9. The release mechanism was confirmed using the Korsmeyer-Peppas model that revealed that most of the formulations exhibited anomalous transport kinetics with the release exponent, n, ranging from 0.5
- Full Text:
- Date Issued: 2014
- Authors: Zindove, Chiedza Cathrine
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54722 , vital:26603
- Description:
Stavudine (D4T) has been used as first line treatment for HIV/AIDS and is part of highly active anti retroviral treatment (HAART). It is an affordable medicine and its use is beneficial in resource limited settings. However D4T exhibits dose dependent side effects that may lead to non-adherence in patients. This study was undertaken to formulate, develop and manufacture a dosage form that could reduce dose dependent side effects by decreasing the dose of D4T but still exhibit antiretroviral (ARV) activity. The use of sustained release (SR) formulations of D4T that ensure constant levels of the D4T in the body would not only optimize therapy but also reduce the incidence of side effects thereby increasing patient adherence. SR microparticles containing 30mg D4T were manufactured and loaded into size 3 hard gelatine capsules prior to analysis. The D4T microparticles were manufactured by microencapsulation using non-aqueous oil-in-oil solvent evaporation approach. D4T-excipient, excipient-excipient interactions and D4T purity were assessed using Infrared Spectroscopy (IR), Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Copolymers synthesized from acrylic and methacrylic acid esters viz., Eudragit® RSPO and S100 were used as rate retardant materials and the effect of microcrystalline cellulose (Avicel® PH102) on the microparticles was also investigated. Magnesium stearate was used as a droplet stabilizer and n-hexane was added to harden the microspheres formed in a liquid paraffin continuous phase. The microparticles were optimized using a Box Behnken design and Response Surface Methodology (RSM). The microparticles were characterized in terms of their flow properties and encapsulation efficiency (% EE), in addition to visualization of the surface morphology with Scanning Electron Microscopy. In vitro D4T release studies were performed using USP Apparatus III in media of different pH and the samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection that had been developed and optimized using a Central Composite Design (CCD). The method was validated according to ICH guidelines. The IR spectra and DSC thermographs revealed that D4T exhibited thermal stability and there was no evidence of D4T-excipient and excipient-excipient interactions. The microparticles that were produced were white, free flowing and were obtained in a high yield with high encapsulation efficiency. Scanning Electron Microscopy studies revealed that the microparticles were spherical and porous in nature. In vitro D4T release extended to 12 hours and the mechanism of release was established using model dependent methods by fitting the data to a Zero order, First order, Higuchi and Hixson Crowell model. It was observed that the mechanism of D4T release was diffusion-controlled and that the data was best fitted to the Higuchi model with correlation coefficients > 0.9. The release mechanism was confirmed using the Korsmeyer-Peppas model that revealed that most of the formulations exhibited anomalous transport kinetics with the release exponent, n, ranging from 0.5
- Full Text:
- Date Issued: 2014
The development and assessment of sustained release nevirapine tablets
- Authors: Mwila, Chiluba
- Date: 2013
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54667 , vital:26598
- Description: The use of antiretroviral (ARV) agents in the management of HIV/AIDS has significantly improved the lifestyle and wellbeing of patients. Despite the success that has been achieved with the use of ARV therapy, the occurrence of adverse effects and unpredictable bioavailability associated with most of these drugs remains a major concern. Nevirapine (NVP) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) that is used in combination with other ARV compounds for the treatment of HIV-1 infections. It is also used for the prevention of mother to child transmission of the HIV-1 virus. NVP is a Biopharmaceutics Classification System (BCS) Class II compound. Although NVP exhibits good oral absorption, it induces self-metabolism leading to low and sometimes unpredictable bioavailability. NVP is commercially available as an immediate release and extended release dosage form, viz., Viramune® XR. Formulation of a generic sustained release (SR) dosage form for once daily dosing would result in delivery of constant amount of the drug to the circulation, reduce dose related adverse effects, improve patient compliance to medication and reduce the costs of therapy. A simple RP-HPLC method was developed and optimised using a central composite design approach. The method was validated using ICH guidelines and was found to be linear, precise, specific and accurate for the analysis of NVP both in bulk and dosage forms. Direct compression was used as the method of tablet manufacture. Different polymers were assessed for suitability as rate retarding polymers and included Methocel® K4M, Carbopol® 71G NF and Eudragit® RSPO. Powder blends were assessed for flow properties using the angle of repose, bulk and tapped density, Carr’s Compressibility index and Hausner’s ratio. The traditional approach of changing the amount of polymers and diluents systematically to achieve a desired NVP release profile was used for the development of a preliminary formulation. Response surface methodology was used for the optimisation of the formulation using a Box-Behnken quadratic design. Physical characteristics of the tablets such as thickness, weight, hardness, tensile strength and friability were assessed and the tablets passed Pharmacopoeial testing. NVP assay and content uniformity were assessed using a validated RP-HPLC method. Initially, USP Apparatus 2 was used to study NVP release over a 24 hour period and subsequently dissolution studies were performed using USP Apparatus 3 as it can be used to simulate GIT conditions. The dissolution profiles generated were used to determine the agitation rate for USP Apparatus 3 that would be equivalent to an agitation rate of 50 rpm when using USP Apparatus 2. The effect of the mesh screen pore size, buffer molarity strength and concentration of surfactant on NVP release were also investigated in order to select discriminatory dissolution test conditions for the test formulation. Dissolution profiles were compared to those of the commercially available Viramune® XR using the FDA recommended difference (f1) and similarity (f2) factors. The calculated values for f1 and f2 revealed that the dissolution profile for the optimised formulation that was identified was statistically similar to Viramune® XR. In vitro release data were fitted to different kinetic models to study the release kinetics of NVP. The overall mechanism of NVP release was best described using the Korsmeyer-Peppas diffusion exponent value, n. NVP release was found to be anomalous, implying that the release was influenced by a combination of diffusion, swelling and polymer chain relaxation. The Hixson-Crowell model revealed that there was constant change in surface area of the dosage form suggesting that erosion and swelling were significant factors affecting NVP release from the hydrophilic matrix technology. The release kinetics data were also used to design the optimised formulation. Tablets manufactured using the optimised formulation were subjected to water uptake and erosion studies and the results revealed that swelling and erosion occur simultaneously. The effects of pH and molarity on the swelling and erosion of the tablets were also investigated. The data suggest that increase in pH resulted in a slight increase in swelling while an increase in molarity did not have a significant effect on swelling. The change in pH did not have a significant effect on erosion while an increase in molarity strength resulted in a decrease in matrix erosion. The effect of HPMC grade on swelling, erosion and NVP release revealed that the grade of HPMC used had a significant effect on NVP release, with the release rate decreasing, swelling increasing and erosion decreasing as the viscosity of the HPMC grade increased. The effect of the particle size of MCC on NVP release was also studied by manufacturing tablets containing different grades of MCC and these studies revealed that particle size did not appear to have a significant effect on NVP release. Similarly the use of different types of lactose did not appear to have a significant impact on NVP release. In conclusion a sustained release NVP tablet formulation that has the potential for further development and optimisation has been developed, assessed and manufactured successfully and has been shown to exhibit similar dissolution behaviour to Viramune® XR, a commercially available NVP extended release product.
- Full Text:
- Date Issued: 2013
- Authors: Mwila, Chiluba
- Date: 2013
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/54667 , vital:26598
- Description: The use of antiretroviral (ARV) agents in the management of HIV/AIDS has significantly improved the lifestyle and wellbeing of patients. Despite the success that has been achieved with the use of ARV therapy, the occurrence of adverse effects and unpredictable bioavailability associated with most of these drugs remains a major concern. Nevirapine (NVP) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) that is used in combination with other ARV compounds for the treatment of HIV-1 infections. It is also used for the prevention of mother to child transmission of the HIV-1 virus. NVP is a Biopharmaceutics Classification System (BCS) Class II compound. Although NVP exhibits good oral absorption, it induces self-metabolism leading to low and sometimes unpredictable bioavailability. NVP is commercially available as an immediate release and extended release dosage form, viz., Viramune® XR. Formulation of a generic sustained release (SR) dosage form for once daily dosing would result in delivery of constant amount of the drug to the circulation, reduce dose related adverse effects, improve patient compliance to medication and reduce the costs of therapy. A simple RP-HPLC method was developed and optimised using a central composite design approach. The method was validated using ICH guidelines and was found to be linear, precise, specific and accurate for the analysis of NVP both in bulk and dosage forms. Direct compression was used as the method of tablet manufacture. Different polymers were assessed for suitability as rate retarding polymers and included Methocel® K4M, Carbopol® 71G NF and Eudragit® RSPO. Powder blends were assessed for flow properties using the angle of repose, bulk and tapped density, Carr’s Compressibility index and Hausner’s ratio. The traditional approach of changing the amount of polymers and diluents systematically to achieve a desired NVP release profile was used for the development of a preliminary formulation. Response surface methodology was used for the optimisation of the formulation using a Box-Behnken quadratic design. Physical characteristics of the tablets such as thickness, weight, hardness, tensile strength and friability were assessed and the tablets passed Pharmacopoeial testing. NVP assay and content uniformity were assessed using a validated RP-HPLC method. Initially, USP Apparatus 2 was used to study NVP release over a 24 hour period and subsequently dissolution studies were performed using USP Apparatus 3 as it can be used to simulate GIT conditions. The dissolution profiles generated were used to determine the agitation rate for USP Apparatus 3 that would be equivalent to an agitation rate of 50 rpm when using USP Apparatus 2. The effect of the mesh screen pore size, buffer molarity strength and concentration of surfactant on NVP release were also investigated in order to select discriminatory dissolution test conditions for the test formulation. Dissolution profiles were compared to those of the commercially available Viramune® XR using the FDA recommended difference (f1) and similarity (f2) factors. The calculated values for f1 and f2 revealed that the dissolution profile for the optimised formulation that was identified was statistically similar to Viramune® XR. In vitro release data were fitted to different kinetic models to study the release kinetics of NVP. The overall mechanism of NVP release was best described using the Korsmeyer-Peppas diffusion exponent value, n. NVP release was found to be anomalous, implying that the release was influenced by a combination of diffusion, swelling and polymer chain relaxation. The Hixson-Crowell model revealed that there was constant change in surface area of the dosage form suggesting that erosion and swelling were significant factors affecting NVP release from the hydrophilic matrix technology. The release kinetics data were also used to design the optimised formulation. Tablets manufactured using the optimised formulation were subjected to water uptake and erosion studies and the results revealed that swelling and erosion occur simultaneously. The effects of pH and molarity on the swelling and erosion of the tablets were also investigated. The data suggest that increase in pH resulted in a slight increase in swelling while an increase in molarity did not have a significant effect on swelling. The change in pH did not have a significant effect on erosion while an increase in molarity strength resulted in a decrease in matrix erosion. The effect of HPMC grade on swelling, erosion and NVP release revealed that the grade of HPMC used had a significant effect on NVP release, with the release rate decreasing, swelling increasing and erosion decreasing as the viscosity of the HPMC grade increased. The effect of the particle size of MCC on NVP release was also studied by manufacturing tablets containing different grades of MCC and these studies revealed that particle size did not appear to have a significant effect on NVP release. Similarly the use of different types of lactose did not appear to have a significant impact on NVP release. In conclusion a sustained release NVP tablet formulation that has the potential for further development and optimisation has been developed, assessed and manufactured successfully and has been shown to exhibit similar dissolution behaviour to Viramune® XR, a commercially available NVP extended release product.
- Full Text:
- Date Issued: 2013
- «
- ‹
- 1
- ›
- »