Agro-morphological characterization and investigations into the response of yellow Quality Protein Maize (QPM) genotypes to low soil pH
- Authors: Bobotyana, Simthandile
- Date: 2021-04
- Subjects: Corn as food , Plants--Drought tolerance
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/20528 , vital:46087
- Description: Maize (Zea mays L) is an essential food grain crop in South Africa and is mainly grown under rainfed conditions by small-scale farmers. Quality Protein Maize (QPM) contains a higher level of two essential amino acids, tryptophan, and lysine when equated to normal maize. Therefore, the QPM in communities is a vital cereal where maize is a staple crop. Among the significant abiotic stresses that adversely affect maize productivity, such as soil fertility. Low soil pH or soil acidity results in nutrient deficiencies, as well as the toxicity of minerals such as manganese (Mn), aluminium (Al), and iron (Fe). The objectives of the study were to: (1) Characterize yellow QPM inbred lines and testcross hybrids for agro-morphological variability under optimum conditions, (2) Determine the response of QPM inbred lines and testcross hybrids to Al toxicity, and (3) Estimate the combining ability of QPM genotypes for the tolerance to Al toxicity. The laboratory assessment for tolerance to Al toxicity revealed a negative relationship between relative root growth RRG and hematoxylin staining; among the inbred lines, the genotype 8Y, 17Y, and 7Y had the highest RRG and net root growth (NRG) values and exhibited the highest tolerance to Al tolerance with the least hematoxylin staining. Inbred lines 12Y, 16Y, 19Y, 2Y, 20Y, 24Y, 30Y, 27Y, 34Y, 4Y, and 11Y were moderately tolerant. On the other hand, inbred lines 13Y, 18Y, and QSY5 had the least RRG were susceptible. Forty-four testcross hybrids were generated by crossing 22 QPM inbred lines with two open-pollinated variety (OPV) testers. These hybrids were evaluated together with five checks for different agronomic traits. The hybrids were planted in the summer season of 2017/18 and 2018/19 under rain-fed conditions 7 x 7 alpha lattice design was used. The significant variations among the genotypes for grain yield and most other agronomic traits under optimum, acidic conditions and across environments on combined analysis of variance. The hybrid was 14Y x NC (3.22 t/ha), followed by QSY5 x NC (3.02 t/ha) showed the highest yielding. The mean plant height was 226.23 cm, with ranges 197.60 to 254.85cm. The number of kernels per ear was 35, with a range from 29.45 to 40.25. Conversely, the mean ear length was 19.30 cm with a range of 17.65 to 20.95 cm, and the mean ear diameter ranged from 13,50 to 16,05 cm. The highest yielding hybrid, according to ranking, was 14Y x NC (2,93t/ha), which was ranked number 3, followed by 3Y x NC (2,83 t/ha), which was ranked number 4. Twenty-two yellow QPM inbred lines were evaluated for agro-morphological characteristics. A randomized complete block design with three replicates was used under acidic and normal soil conditions at two locations. The mean performance of inbred lines for grain yield ranged from 1.6 t/ha to 3.1 t/ha under optimum conditions, whereas it ranged from 1.1.t/ha to 1.7 t/ha under an acidic environment. The highest grain yielding genotypes under the optimum environment were 14Y, 7Y, and QSY5, while, in the acidic environment, the highest yielders were 3Y, QSY5, and 17Y. The lowest grain yielder under the optimum environment was 16Y at 1.5 t/ha, whereas 6Y, 7Y, 8Y, and 29Y were the most moderate yielders under the acidic environment. Grain yield displayed positive and significant (p<0,05) correlation with ear height (0.59), plant height (0.55), leaf length (0.18), number of leaves (0.37), number of ears per plot (0,54), number of kernels per row, number of rows per ear and thousand kernel weight. Combined ANOVA revealed that the environment effect was significant for all traits except the number of rows per ear and the number of ears in both environments. A total of 71 genotypes (22 inbred lines, forty-four single crosses, and five checks) were evaluated using a 7 x 7 alpha lattice design with two replications in combining ability. Across environments, the analysis showed a mean grain yield record of hybrids that ranged from 1.78 t/ha to 3.42 t/ha. Combined analysis showed only about 4 percent of the 44 hybrids had better grain yield than hybrid checks, whereas about 11 percent of the 44 hybrids had higher grain yield than two of the five hybrid checks. The highest yielding hybrid was 14Y x NC followed by QSY5 x NC. The Mid-parent heterosis (MPH) for grain yield ranged from -32.70 for 11YxObat to 16.50 percent for 14YxNC among the top-yielding genotypes. The highest positive mid-parent heterosis (MPH) for grain yield was observed in hybrid 14YxNC followed by QSY9xNC, QSY5xOBAT, 3YxNC, 13YxNC and 4YxOBAT, while the remaining hybrids exhibited negative estimates. Inbred lines' proportional contributions to the total variances were much higher than the testers for all traits. Whereas the inbred lines' proportional contribution was lower than the interaction of line x tester except on the number of ears which displayed the highest estimates of variances due to SCA effects, significant variation was observed. The GCA effects on grain yield in both environments generally showed no significant difference among inbred lines except for inbred lines such as QSY5 and 34Y but were positive. The selected crosses showed significant SCA effects in a few agronomic yield-related traits in the combined analysis. Among the hybrids, the only crosses that showed significant and positive SCA effects for grain yield were 25YxNC under optimum and 34YxObat under acidic environment. The inbred lines were assessed for tolerance to Al toxicity under laboratory conditions. Overall, the study identified soil acidity tolerant QPM inbred lines with an excellent combining ability for high-yielding QPM test hybrids, grain yield, and related traits. , Thesis (MSc) (Agriculture, Crop Science) -- University of Fort Hare, 2021
- Full Text:
- Date Issued: 2021-04
Parent characterization of quality protein maize (Zea mays L.) and combining ability for tolerance to drought stress
- Authors: Pfunde, Cleopatra Nyaradzo
- Date: 2012
- Subjects: Corn -- Quality , Corn as food , Corn -- Effect of stress on , Corn -- Effect of drought on , Cluster analysis , Crops -- Effect of drought on , Corn -- Drought tolerance , Corn -- Breeding , Crops -- Drought tolerance
- Language: English
- Type: Thesis , Masters , MSc Agric (Crop Science)
- Identifier: vital:11869 , http://hdl.handle.net/10353/d1007536 , Corn -- Quality , Corn as food , Corn -- Effect of stress on , Corn -- Effect of drought on , Cluster analysis , Crops -- Effect of drought on , Corn -- Drought tolerance , Corn -- Breeding , Crops -- Drought tolerance
- Description: Quality protein maize (QPM) has enhanced levels of two essential amino acids, lysine and tryptophan compared to normal maize. This makes QPM an important cereal crop in communities where maize is a staple crop. The main abiotic factor to QPM production is drought stress. Little information is available on the effect of drought stress on QPM. Therefore, the objectives of this study were to: (i) conduct diversity analysis of QPM inbred lines using morpho-agronomic and simple sequence repeat markers, (ii) screen available QPM inbred lines and F1 progeny for tolerance to seedling drought stress, (iii) determine the combining ability and type of gene action of QPM inbred lines for tolerance to seedling drought stress, grain yield and endosperm modification. The study was conducted in South Africa, at the University of Fort Hare. Morphological characterisation of 21 inbred lines was done using quantitative and qualitative traits. A randomised complete block design with three replicates was used for characterizing the inbred lines in the field. Genstat statistical software, version 12 (Genstat ®, 2009) was used for analysis of variance (ANOVA) and descriptive statistics. Analysis of variance was performed on all quantitative data for morphological traits. Data for qualitative traits was tabulated in their nominal classes. Traits that contributed most to the variation were days to anthesis, days to silking, anthesis-silking interval, plant height, number of kernel rows, ear length and grain yield. Cluster analysis grouped the inbred lines into three main clusters. The first cluster was characterised by tall and average yielding lines, while the second cluster showed the least anthesis-silking interval, and had the highest yield. Cluster three consisted of lines that were early maturing, but were the least yielding. Genetic distances between maize inbred lines were quantified by using 27 simple sequence repeat markers. The genetic distances between genotypes was computed using Roger’s (1972) genetic distances. Cluster analysis was then carried out using the neighbour-joining tree method using Power Marker software version 3.25. A dendrogram generated from the genetic study of the inbred lines revealed three groups that concurred with expectations based upon pedigree data. These groups were not identical to the groups generated using morpho-agronomic characterisation. Twenty one QPM inbred lines were crossed using a North Carolina design II mating scheme. These were divided into seven sets, each with three inbred lines. The three inbred lines in one set were used as females and crossed with three inbred lines in another set consisting of males. Each inbred line was used as a female in one set, and as a male in a second set. Sixty three hybrids (7 sets x 9 hybrids) were formed and evaluated in October 2011, using a 6x8 alpha-lattice incomplete block design with three replicates under glasshouse and optimum field conditions. A randomised complete block design with three replicates was used for the 21 parental inbred lines. Traits recorded for the glasshouse study were, canopy temperature, chlorophyll content, leaf roll, stem diameter, plant height, leaf number, leaf area, fresh and dry root and shoot weights. Data for the various traits for each environment, 25 percent (stress treatment) and 75 percent (non-stress) of field capacity, were subjected to analysis of variance using the unbalanced treatment design in Genstat statistical package Edition 12. Where varietal differences were found, means were separated using Tukey’s test. Genetic analyses for grain yield and agronomic traits were performed using a fixed effects model in JMP 10 following Residual Maximum Likelihood procedure (REML). From the results, inbred lines that were not previously classified into heterotic groups and drought tolerance categories were classified based on their total dry weight performance and drought susceptibility index. Inbred lines L18, L9, L8, L6 and L3, in order of their drought tolerance index were the best performers under greenhouse conditions and could be recommended for breeding new varieties that are tolerant to seedling drought stress. Evaluation of maize seedlings tolerant to drought stress under glasshouse conditions revealed that cross combination L18 x L11 was drought tolerant, while cross L20 x L7 was susceptible. Total dry weight was used as the major criteria for classifying F1 maize seedlings as being resistant or susceptible. General combining ability effects accounted for 67.43 percent of the genetic variation for total dry weight, while specific combining ability effects contributed 37.57 percent. This indicated that additive gene effects were more important than non-additive gene action in controlling this trait. In the field study (non-drought), the experimental design was a 6x8 alpha lattice incomplete block design with three replicates. On an adjacent field a randomised complete block design with three replicates was used to evaluate the parental inbred lines. The following variables were recorded: plant height, ear height, ears per plant, endosperm modification, days to silking and days to anthesis, anthesis-silking interval, number of kernels per row, number of rows per ear and grain yield. General analyses for the incomplete lattice block design and randomised complete block design for hybrid and inbred data respectively were performed using JMP 10 statistical software. Means were separated using the Tukey's test. Genetic analyses of data for grain yield and agronomic traits were conducted using a fixed effects model using REML in JMP 10. The importance of both GCA (51 percent) and SCA (49 percent) was observed for grain yield. A preponderance of GCA existed for ear height, days to anthesis, anthesis-silking interval, ears per plant and number of kernels per row, indicating that predominantly, additive gene effects controlled hybrid performance under optimum field conditions. The highest heritability was observed for days to silking (48.27 percent) suggesting that yield could be improved through selection for this trait. Under field conditions, variation in time to maturity was observed. This implies that these inbred lines can be recommended for utilisation in different agro-ecologies. Early maturing lines such as L18 can be used to introduce earliness in local cultivars, while early maturing single crosses such as L18 x L2, L5 x L9, L3 x L4 and L2 x L21 could be recommended for maize growers in drought prone areas such as the former Ciskei. Single crosses L18xL11, L16xL18, L8xL21 and L9xL6 had good tolerance to seedling drought stress. On the other hand, single crosses L18xL11 and L11xL13 had high grain yield and good endosperm modification. All these single crosses could be recommended for commercial production after evaluation across locations in the Eastern Cape Province. Alternatively they can be crossed with other superior inbreds to generate three or four way hybrids, which could then be evaluated for potential use by farmers in the Eastern Cape.
- Full Text:
- Date Issued: 2012