Real-time audio spectrum analyser research, design, development and implementation using the 32 bit ARMR Cortex-M4 microcontroller
- Authors: Just, Stefan Antonio
- Date: 2017
- Subjects: Spectrum analyzers , Sound -- Recording and reproducing -- Digital techniques , Real-time data processing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/50536 , vital:25997
- Description: This thesis describes the design and testing of a low-cost hand-held real-time audio analyser (RTAA). This includes the design of an embedded system, the development of the firmware executed by the embedded system, and the implementation of a real-time signal processing algorithms. One of the objectives of this project was to design an alternative low-cost audio analyser to the current commercially available solutions. The device was tested with the audio standard test signal (pink noise) and was compared to the expected at-spectrum response corresponding to a balanced audio system. The design makes use of an 32-bit Reduced Instruction Set Computer (RISC) processor core (ARM Cortex-M4), namely the STM32F4 family of microcontrollers. Due to the pin compatibility of the microcontroller (designed and manufactured by STMicroelectronics), the new development board can also be upgraded with the newly released Cortex-M7 microcontroller, namely the STM32F7 family of microcontrollers. Moreover, the low-cost hardware design features 256kB Random Access Memory (RAM); on-board Micro-Electro-Mechanical System (MEMS) microphone; on-chip 12-bit Analogue-to-Digital (A/D) and Digital-to-Analogue (D/A) Converters; 3.2" Thin-Film-Transistor Liquid-Crystal Display (TFT-LCD) with a resistive touch screen sensor and SD-Card Socket. Furthermore, two additional expansion modules were designed and can extend the functionality of the designed real-time audio analyser. Firstly, an audio/video module featuring a professional 24-bit 192kHz sampling rate audio CODEC; balanced audio microphone input; unbalanced line output; three MEMS microphone inputs; headphone output; and a Video Graphics Array (VGA) controller allowing the display of the analysed audio spectrum on either a projector or monitor. The second expansion module features two external memories: 1MB Static Random Access Memory (SRAM) and 16MB Synchronous Dynamic Random Access Memory (SDRAM). While the two additional expansion modules were not completely utilised by the firmware presented in this thesis, upgrades of the real-time audio analyser firmware in future revisions will provide a higher performing and more accurate analysis of the audio spectrum. The full research and design process for the real-time audio analyser is discussed and both Problems and pitfalls with the final implemented design are highlighted and possible resolutions were investigated. The development costs (excluding labour) are given in the form of a bill of materials (BOM) with the total costs averaging around R1000. Moreover, the additional VGA controller could further decrease the overall costs with the removal of the TFT-LCD screen from the audio analyser and provided the external display was not included in the BOM.
- Full Text:
- Date Issued: 2017
Service provisioning in two open-source SIP implementation, cinema and vocal
- Authors: Hsieh, Ming Chih
- Date: 2013-06-18
- Subjects: Real-time data processing , Computer network protocols , Internet telephony , Digital telephone systems , Communication -- Technological innovations
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4687 , http://hdl.handle.net/10962/d1008195 , Real-time data processing , Computer network protocols , Internet telephony , Digital telephone systems , Communication -- Technological innovations
- Description: The distribution of real-time multimedia streams is seen nowadays as the next step forward for the Internet. One of the most obvious uses of such streams is to support telephony over the Internet, replacing and improving traditional telephony. This thesis investigates the development and deployment of services in two Internet telephony environments, namely CINEMA (Columbia InterNet Extensible Multimedia Architecture) and VOCAL (Vovida Open Communication Application Library), both based on the Session Initiation Protocol (SIP) and open-sourced. A classification of services is proposed, which divides services into two large groups: basic and advanced services. Basic services are services such as making point-to-point calls, registering with the server and making calls via the server. Any other service is considered an advanced service. Advanced services are defined by four categories: Call Related, Interactive, Internetworking and Hybrid. New services were implemented for the Call Related, Interactive and Internetworking categories. First, features involving call blocking, call screening and missed calls were implemented in the two environments in order to investigate Call-related services. Next, a notification feature was implemented in both environments in order to investigate Interactive services. Finally, a translator between MGCP and SIP was developed to investigate an Internetworking service in the VOCAL environment. The practical implementation of the new features just described was used to answer questions about the location of the services, as well as the level of required expertise and the ease or difficulty experienced in creating services in each of the two environments. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
Implementing non-photorealistic rendering enhancements with real-time performance
- Authors: Winnemöller, Holger
- Date: 2002 , 2013-05-09
- Subjects: Computer animation , Computer graphics , Real-time data processing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4580 , http://hdl.handle.net/10962/d1003135 , Computer animation , Computer graphics , Real-time data processing
- Description: We describe quality and performance enhancements, which work in real-time, to all well-known Non-photorealistic (NPR) rendering styles for use in an interactive context. These include Comic rendering, Sketch rendering, Hatching and Painterly rendering, but we also attempt and justify a widening of the established definition of what is considered NPR. In the individual Chapters, we identify typical stylistic elements of the different NPR styles. We list problems that need to be solved in order to implement the various renderers. Standard solutions available in the literature are introduced and in all cases extended and optimised. In particular, we extend the lighting model of the comic renderer to include a specular component and introduce multiple inter-related but independent geometric approximations which greatly improve rendering performance. We implement two completely different solutions to random perturbation sketching, solve temporal coherence issues for coal sketching and find an unexpected use for 3D textures to implement hatch-shading. Textured brushes of painterly rendering are extended by properties such as stroke-direction and texture, motion, paint capacity, opacity and emission, making them more flexible and versatile. Brushes are also provided with a minimal amount of intelligence, so that they can help in maximising screen coverage of brushes. We furthermore devise a completely new NPR style, which we call super-realistic and show how sample images can be tweened in real-time to produce an image-based six degree-of-freedom renderer performing at roughly 450 frames per second. Performance values for our other renderers all lie between 10 and over 400 frames per second on homePC hardware, justifying our real-time claim. A large number of sample screen-shots, illustrations and animations demonstrate the visual fidelity of our rendered images. In essence, we successfully achieve our attempted goals of increasing the creative, expressive and communicative potential of individual NPR styles, increasing performance of most of them, adding original and interesting visual qualities, and exploring new techniques or existing ones in novel ways. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2002