The integration of effluent treatment using constructed wetlands, with crop production and aquaculture
- Authors: de Jong, Martyn
- Date: 2019
- Subjects: Recycling (Waste, etc.) , Brewery waste , Sewage -- Purification , Beets , Mozambique tilapia
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/95767 , vital:31197
- Description: Breweries are major consumers of water and produce nutrient rich wastewater. Therefore, it is important to research technologies that optimise the reuse and recycling of this waste. This study compared different constructed wetlands (CWs) in terms of their potential for cleaning brewery effluent and simultaneously producing crops Beta vulgaris and fish Oreochromis mossambicus. Filling and draining times (FDT; 15 min, 30 min and 60 min) in tidal CWs were compared in Experiment 1. The 15 min FDT (6.52 ± 0.09 mg/l) and 30 min FDT (5.74 ± 0.09 mg/l) had higher dissolved oxygen (DO) than the 60 min FDT (5.40 ± 0.09 mg/l; p<0.05). This resulted in the 15 and 30 min FDT treatments reaching ammonia effluent discharge standards sooner than the 60 min FDT. Total plant harvest increased with increasing FDT; therefore, 15 min FDT was used as the FDT in tidal treatments in the following experiments. The aerated CW (5.81 ± 0.07 mg/l) and tidal CW (5.67 ± 0.07 mg/l) treatments had higher DO concentrations than the unaerated CW treatment (3.76 ± 0.07 mg/l; p<0.05) in Experiment 2. This resulted in lower ammonia concentrations on day 5 in the aerated and tidal CWs compared with the unaerated treatment (p<0.05). The tidal CW (23.97 ± 2.57 kg) had a total harvest that was approximately four times higher than the unaerated CW (p<0.05), which had the highest frequency of chlorosis and plant mortality; and was unable to treat ammonia to discharge standards. In Experiment 3, the aerated and tidal CW were compared with municipal-water as water sources for aquaculture. There were no differences in fish growth (p > 0.05). However, there were differences in water quality; with the municipal treatment having the lowest pH, EC and nitrate concentration (p<0.05); but all water quality parameters remained in a range suitably for fish production. Due to the tidal CW having the highest plant harvest and lowest frequency of chlorosis and mortality; it was the most suitable CW technology to clean the brewery effluent, and to produce B. vulgaris and water that could be used downstream in aquaculture.
- Full Text:
- Date Issued: 2019
Assessment of the physicochemical and microbiological qualities of Tyume River in Amathole District in the Eastern Cape Province, South Africa
- Authors: Sibanda, Timothy https://orcid.org/0000-0002-6864-3796
- Date: 2013-05
- Subjects: Water -- Purification , Sewage -- Purification
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24465 , vital:62812
- Description: The bioflocculant-producing potentials of three marine bacteria isolated from the sediment samples of Algoa Bay in the Eastern Cape Province of South Africa were assessed. Analysis of the partial nucleotide sequence of the 16S rDNA of the bacteria revealed 99 percent, 99 percent, and 98 percent similarity to Cobetia sp. L222, Bacillus sp. A-5A, and Bacillus sp. HXG-C1 respectively and the sequence was deposited in GenBank as Cobetia sp. OAUIFE, Bacillus sp. MAYA and Bacillus sp. Gilbert (accession number JF799092, JF799093, and HQ537128 respectively). Cultivation condition studies for Cobetia sp. OAUIFE revealed that bioflocculant production was optimal with an inoculum size of 2 percent (v/v), initial pH of 6.0, Mn2+ as the metal ion, and glucose as the carbon source. Metal ions, including Na+, K+, Li+, Ca2+and Mg2+ stimulated bioflocculant production resulting in flocculating activity of above 90 percent. This crude bioflocculant is thermally stable, with about 78 percent of its flocculating activity remaining after heating at 100 oC for 25 min. Analysis of the purified bioflocculant revealed it to be an acidic extracellular polysaccharide. FTIR analysis revealed the presence of methoxyl, hydroxyl, and carboxyl - groups in the compound bioflocculant and SEM micrograph of the bioflocculant revealed a crystal-linear structure. On the other hand, bioflocculant production by Bacillus sp. MAYA was optimal when glucose (95.6 percent flocculating activity) and ammonium nitrate (83.3 percent flocculating activity) were used as carbon and nitrogen sources respectively; inoculum size was 2 percent (v/v); initial pH 6; and Ca2+ as coagulant aid. Chemical analysis of the purified bioflocculant shows that it is composed of uronic acid, neutral sugar and protein. FTIR analysis also revealed the presence of methoxyl, hydroxyl, carboxyl and amino- groups in this bioflocculant. The bioflocculant is thermostable with about 65.6 percent residual flocculating activity retained after heating the bioflocculant at 100 oC for 25 min. However bioflocculant production by Bacillus sp. Gilbert was optimal when sodium carbonate (95.2 percent flocculating activity) and potassium nitrate (76.6 percent flocculating activity) were used as carbon and nitrogen sources respectively; inoculum size was 3 percent (v/v); initial pH 9; and Al3+ as cation. The crude bioflocculant retained 44.2 percent residual flocculating activity after heating at 100 oC for 15 min. FTIR analysis reveals the presence of hydroxyl, carboxyl and methylene - groups in the compound bioflocculant. SEM micrograph of the bioflocculant revealed an amorphous compound. The consortia of these bacteria strains also produced bioflocculants with high flocculating activities which were highly efficient in removing turbidity and chemical oxygen demand (COD) from brewery wastewater, diary wastewater and river water. The bioflocculants from the consortia seemed better than traditional flocculants such as alum . The characteristics of the bioflocculant produced by the consortium of Cobetia sp. OAUIFE and Bacillus sp. MAYA showed that this extracellular bioflocculant, composed of 66percent uronic acid and 31percent protein and an optimum flocculation (90 percent) of kaolin suspension, when the dosage concentration was 0.8 mg/ml, under weak alkaline pH of 8, and Ca2+ as a coagulant aid. The bioflocculant is thermally stable, with a high residual flocculating activity of 86.7 percent, 89.3 percent and 87.0 percent after heating at 50 oC, 80 oC and 100 oC for 25 min respectively. The FTIR analysis of the bioflocculant indicated the presence of hydroxyl, amino, carbonyl and carboxyl functional groups. Scanning electron microscopy (SEM) image revealed a crystal-linear spongy-like bioflocculant structure and EDX analysis of the purified bioflocculant showed that the elemental composition in mass proportion of C,N,O,S and P was 6.67:6.23:37.55:0.38:4.42 (percent w/w). However, the characteristics of the bioflocculant produced by the consortium of Cobetia sp OAUIFE and Bacillus sp. Gilbert showed an optimum flocculation (90 percent) of kaolin suspension when the dosage concentration was 0.2 mg/ml, under neutral pH of 7, and Ca2+ as a coagulant aid. The FTIR analysis of the bioflocculant Tyume River water samples were collected monthly, over a 12-month period starting from August 2010 and ending in July 2011, and transported on ice to the Applied and Environmental Microbiology Research Group (AEMREG) Laboratory at the University of Fort Hare, Alice for analyses within 6 h of collection. Electrical conductivity (EC), total dissolved solids (TDS), temperature, pH and dissolved oxygen (DO) of water samples were determined in situ using a multi-parameter ion-specific meter. Concentrations of orthophosphate and total nitrogen (nitrate + nitrite) were determined by standard photometric methods. Total coliforms (TC), faecal coliforms (FC) and enterococci were determined by the membrane filtration method. Viruses in water samples were concentrated using the adsorption-elution method, followed by extraction of viral nucleic acids and purification done using commercially available kits. The concentrations of human enteric viruses in the river-water samples were estimated using quantitative PCR. RNA viruses were quantified in a two-step protocol where RNA was first transcribed into cDNA in a separate reverse-transcription step. Adenovirus species and serotypes were simultaneously detected using serotype-specific multiplex PCR. Norovirus genogroups GI and GII were detected by semi-nested PCR. The risk of infection associated with recreational and domestic use of the water was also estimated. Biochemical oxygen demand (BOD) levels fell within the stipulated BOD guideline of 10 mg/ℓ for surface waters where full contact use is allowed and ≤ 30 mg/ℓ where public access is prohibited, restricted, or infrequent. DO concentrations generally ranged between 7.47 mg/ℓ and 10.42 mg/ℓ, well within the target water quality requirements. The temperature regime ranged between 6°C and 28°C and for most sampling sites, the temperature regimes were within the acceptable limit of no risk (≤ 25°C) for domestic water uses in South Africa. EC ranged between 47 μS/cm and 408 μS/cm well within the South African target water quality EC guideline of 700 μS/cm though it was observed to increase as the river flowed through settlements. The pH in the period beginning September 2010 through to January 2011 was consistently below pH 9, but from February 2011 to June 2011 the pH significantly increased to between pH 10 and pH 11 at most sampling sites. Unpolluted waters normally show a pH of between 6.5 and 8.5. Most of the pH values observed in this study lie between pH 8.5 and pH 10.8 levels which are not far off from the upper level guideline of pH 9.0 for domestic use. Turbidity ranged between 6 NTU and 281 and fell short of the target water quality range (0 NTU to 1 NTU) of no risk for domestic water uses in South Africa. Monthly TDS values and EC values showed direct proportionality. TDS concentrations at all sites fell within the acceptable guideline of 0 mg/ℓ to 450 mg/ℓ of TDS for domestic use. Nutrient profiles were as follows: nitrate (0.18 mg/ℓ to 4.21 mg/ℓ); nitrite (0.02 mg/ℓ to 2.35 mg/ℓ); and orthophosphate (0.06 mg/ℓ to 2.72 mg/ℓ). The bacteriological qualities of the water were poor, exceeding the guideline of 200 CFU/100 mℓ and 33 CFU/100 mℓ for FC and enterococci respectively, for recreational water. FC counts also exceeded the 1 000 CFU/100 mℓ guideline for water used in fresh produce irrigation. Generally, higher counts of TC, FC and enterococci were recorded at the sampling sites located at the lower reaches of the river compared to the upper reaches. Adenovirus was detected in 31percent of the river samples in concentrations ranging between 1.0×100 genome copies/ℓ and 8.49×104 genome copies/ℓ. Serotyping showed the presence of species C adenovirus serotypes 1, 2, 6 and 7, and species F adenovirus serotype 41. The prevalence of norovirus was 4percent while rotavirus was detected in 4percent of river samples in concentrations ranging between 9×100 genome copies/ℓ and 5.64×103 genome copies/ℓ. Hepatitis A virus was detected in 13percent of river samples in concentrations ranging between1.67×103 and 1.64×104 genome copies/ℓ while enteroviruses were not detected. Detection of enteric viruses was inversely correlated to temperature. Risk analysis showed that both hepatitis A virus and adenovirus presented significantly higher risk of infection values compared to rotavirus in the case of ingestion of 10 mℓ or 100 mℓ of water from Tyume River while enteroviruses did not present any significant risk of infection. Tyume River water samples also did not conform to the US Environmental Protection Agency (US EPA) bacterial criteria of 200 CFU/100 mℓ faecal coliforms and 33 CFU/100 mℓ enterococci for bathing waters. Whereas the physicochemical parameters showed that Tyume River water was relatively clean, the bacteriological water quality was poor. Most of the microbiological contamination observed in this study (especially FIBs) can be blamed on inadequate sanitary infrastructure as we observed that open defecation is commonplace in this catchment, which also serves as a conduit for effluent discharges from wastewater-treatment facilities. Enteric viruses were detected along the course of the river in a sporadic pattern, generally not related to natural hydrological cycles and so we conclude that the presence of enteric viruses in the river is suggestive of the dynamics of the same in the host population. Even though the proportion of infective viruses was estimated in this study, fact remains that there is considerable risk of infection posed by the use of raw surface water for either domestic or recreational use. This study further confirmed the lack of correlation between faecal indicator bacteria and enteric virus occurrence in environmental waters, showing that assaying for enteric viruses in environmental waters remains the best method for determining the health risks associated with the use of faecally contaminated water. , Thesis (PhD) -- Faculty of Science and Agriculture, 2013
- Full Text:
- Date Issued: 2013-05
Co-utilisation of microalgae for wastewater treatment and the production of animal feed supplements
- Authors: Johnson, Hailey E
- Date: 2011
- Subjects: Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3940 , http://hdl.handle.net/10962/d1003999 , Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Description: Microalgae have a variety of commercial applications, the oldest of which include utilisation as a food source and for use in wastewater treatment. These applications, however, are seldom combined due to toxicity concerns, for ethical reasons, and generally the requirement for cultivation of a single algae species for use as a feed supplement. These problems might be negated if a “safer” wastewater such as that from agricultural and/or commercial food production facilities were to be utilised and if a stable algae population can be maintained. In this investigation preliminary studies were carried out using an Integrated Algae Pond System (IAPS) for domestic wastewater treatment to determine the species composition in the associated High Rate Algae Ponds (HRAPs). The effect of different modes of operation, continuous versus batch, on nutrient removal, productivity and species composition was also investigated. Furthermore, indigenous species in the HRAP were isolated and molecularly identified as, Chlorella, Micractinium, Scenedesmus and Pediastrum. Additionally, the effect of the nor amino acid, 2-hydroxy-4-(methylthio)-butanoic acid (HMTBA) and its Cu-chelated derivative, on the growth and biochemical composition of Chlorella, Micractinium, Scenedesmus, Pediastrum and Spirulina was investigated. Species composition in the HRAP was stable under continuous operation with Micractinium dominating > 90% of the algae population. Under batch operation the population dynamic shifted; Chlorella outcompeted Micractinium possibly due to nutrient depletion and selective grazing pressures caused by proliferation of Daphnia. Higher species diversity was observed during batch mode as slower growing algae were able to establish in the HRAP. Nutrient removal efficiency and biomass productivity was higher in continuous mode, however lower nutrient levels were obtained in batch operation. HMTBA did not significantly affect growth rate, however treatment with 10 mg.L-1 resulted in slightly increased growth rate in Micractinium and increased final biomass concentrations in Chlorella, Micractinium and Spirulina (although this was not statistically significant for Micractinium and Spirulina), which are known mixotrophic species. Algae treated with Cu-HMTBA, showed reduced final biomass concentration with 10 mg.L-1, caused by Cu toxicity. Biochemical composition of the algae was species-specific and differed through the growth cycle, with high protein observed during early growth and high carbohydrate during late growth/early stationary phase. Additionally, 0.1 mg.L-1 HMTBA and Cu-HMTBA significantly reduced protein content in Chlorella, Micractinium, Scenedesmus and Pediastrum. In conclusion, operation of the HRAP in continuous culture provided suitable wastewater treatment with high productivity of an ideal species, Micractinium, for use in animal feed supplementation. This species had 40% protein content during growth (higher than the other species tested) and dominated the HRAP at > 90% of the algae population during continuous mode. Addition of HMTBA (> 1 mg.L-1) to algae cultivation systems and those treating wastewater, has the potential to improve productivity and the value of the biomass by enhancing protein content. Overall, the co-utilisation of microalgae for wastewater treatment and the generation of a biomass rich in protein, for incorporation into formulated animal feed supplements, represents a closed ecosystem which conserves nutrients and regenerates a most valuable resource, water.
- Full Text:
- Date Issued: 2011
Evaluation and optimization of selected methods of arsenic removal from industrial effluent
- Authors: Rubidge, Gletwyn Robert
- Date: 2004
- Subjects: Arsenic wastes , Water -- Purification -- Arsenic removal , Sewage -- Purification
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10981 , http://hdl.handle.net/10948/230 , Arsenic wastes , Water -- Purification -- Arsenic removal , Sewage -- Purification
- Description: This research was directed at reducing arsenic levels in the effluents generated at the Canelands facility that manufactures monosodium methyl arsenate. Two effluent streams containing arsenic have to be considered, a raw water stream that is treated on site and a brine stream that is disposed of by sea outfall. Removal of arsenate from aqueous media by coagulation was investigated and models were developed describing selected variables that influence the removal of the arsenate. Three coagulant systems were investigated, namely aluminium(III) coagulation, iron(III) coagulation and binary mixtures of aluminium(III) and iron(III). Researchers have studied individual aluminium (III) sulphate and iron(III) chloride coagulation. No detailed research and modelling had, however, been carried out on the use of binary mixtures of aluminium (III) sulphate and iron (III) chloride coagulation of aqueous arsenate, nor had individual aluminium(III) sulphate and iron(III) chloride coagulation of arsenate been modelled at relatively high arsenate concentrations. The models that were generated were validated statistically and experimentally. The variables investigated in the aluminium(III) model included initial arsenate concentration, pH, polymeric flocculent concentration, aluminium(III) concentration and settling time. The variables modelled in the iron(III) coagulation were initial arsenate concentration, pH, polymeric flocculent concentration, and iron(III) to arsenic mole ratio. The modelling of the binary coagulant system included initial arsenate concentration, pH, iron (III) concentration, aluminium(III) concentration, and flocculent concentration as variables. The most efficient arsenic removal by coagulation was iron(III), followed by the binary mixture of aluminium(III) and iron(III) and the weakest coagulant was aluminium(III) sulphate. Scale-up coagulations performed on real raw water samples at a 50 litre volume showed that iron(III) was the most efficient coagulant (on a molar basis) followed closely by the binary mixture, while aluminium(III) coagulation was considerably weaker. The residual arsenic levels of the iron(III) and the binary coagulation systems met the effluent discharge criteria, but the aluminium coagulation system did not. Leaching tests showed that the iron(III) sludge was the most stable followed by the sludge of the binary mixture and the aluminium(III)-based sludge leached arsenic most readily. Settling rate studies showed that the flocs of the iron(III) coagulations settled the fastest, followed by binary mixture flocs and the aluminium flocs settled the slowest. The flocs of the binary mixture had the lowest volume, followed by the iron(III) flocs, while the aluminium(III) flocs were the most voluminous. Based on current operations of the raw water treatment plant the aluminium(III)-based coagulation is the most cost efficient. Given a relative costing of 1.00 for the aluminium(III) coagulation, the iron(III) chloride-based coagulation would be 2.67 times more expensive and the equimolar binary mixed aluminium(III)/iron(III) system would be 1.84 times the cost of aluminium(III) coagulation.
- Full Text:
- Date Issued: 2004
Investigation of the bioconversion of constituents of olive effluents for the production of valuable chemical compounds
- Authors: Notshe, Thandiwe Loretta
- Date: 2002
- Subjects: Phenols , Sewage -- Purification , Effluent quality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4078 , http://hdl.handle.net/10962/d1007446 , Phenols , Sewage -- Purification , Effluent quality
- Description: Olive mill wastewater is produced in large quantities during the production of olive oil and olive production effluents are produced during the processing of olives. This project was planned to find a use for constituents found in olive production wastewater. The task was carried out by first characterizing the olive effluents, then screening microorganisms for growth in the effluents and reduction of the pollutant properties of the effluents. An investigation into the biotransformation of aromatic compounds present in the effluents into useful chemicals, was carried out. The olive production effluents were collected from different stages in the process for treating olive wastewater, viz, a fermentation tank (FB), the surface of a digester (LV) and an evaporation pond (SO). The three effluents were characterized by investigating their phenolic composition. Protocatechuic acid, vanillic acid, syringic acid, hydroxyphenyl acetic acid, coumaric acid and ferulic acid were identified in an olive effluent, FB, using thin layer chromatography (TLC) and High perfomance liquid chromatography (HPLC). Hydroxyphenyl acetic acid constitutes almost 60% of the organics in olive effluent FB. Five bacteria, namely RU-LV1; RU-FBI and RU-FB2; RU-SOI and RU-S02, were isolated from the olive effluents LV, FB and SO respectively. These isolates were found to be halotolerant and were able to grow over a broad temperature and pH range, with the maximum temperature and pH for growth being 28°C and pH 7 respectively. A range of microorganisms were evaluated for their ability to grow and reduce the total phenolic content of the olive effluents. Among these Neurospora crassa showed the highest potential for the biological reduction of total phenolics in olive effluents. Approximately 70% of the total phenolic content was removed by N. crassa. Trametes verscilor, Pseudomonas putida strains, RU-KMI and RU-KM3s, and the bacteria isolated from olive effluents could also degrade the total phenolic content of olive effluents, but to a lesser extent. The ability of the five bacterial isolates to grow and degrade aromatic compounds was assessed by growing them in medium with standard aromatic compounds. RU-L V1 degraded 96%, 100%, 73% and 100% of caffeic acid, protocatechuic acid, p-coumaric acid and vanillic acid respectively. The other isolates degraded caffeic acid and protocatechuic acid, but their ability to degraded p-coumaric acid and vanillic acid was found to be lesser than the ability of RU-LV1 to degrade the same aromatic compounds. Whole cells of RU-LV1 degraded vanillic acid but no metabolic products were observed on HPLC analysis. Resting cells, French pressed extract, cell free extracts and cell debris from RU-LV1 cells induced with vanillic acid degraded vanillic acid, ferulic acid and vanillin at rates higher than those obtained from non-induced cultures. No products were observed during the degradation of vanillic acid. Ferulic acid was converted into vanillic acid by French pressed extract, cell free extract and cell debris of RU-LV1. The maximum yield of vanillic acid as a product (0 .23 mM, 50 %yield) was obtained when cell free extracts of RU-LVI, grown in glucose and induced by vanillic acid, were used for the degradation of 0.4 mM ferulic acid. Vanillin was rapidly converted into vanillic acid by resting cells, cell free extracts and French pressed extract of RU-LVI. Using molecular techniques, the similarity ranking of the RU-LVI 16S rRNA gene and its clone showed a high similarity to Corynebacterium glutamicum and Corynebacterium acedopltilum. The rapid degradation of vanillin to vanillic acid suggests that extracts from RU-LV1 degrade ferulic acid into vanillin which is immediately oxidized to vanillic acid. Vanillic acid is also considered as a high value chemical. This project has a potential of producing useful chemicals from cheap substrates that can be found in olive effluents. , KMBT_363
- Full Text:
- Date Issued: 2002