The use of aeration in constructed wetlands and the potential for earthworm and crop production
- Authors: Cesler, Lia
- Date: 2024-10-11
- Subjects: Constructed wetlands South Africa , Breweries South Africa , Water Purification , Land treatment of wastewater , Sewage Purification Aeration
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/464440 , vital:76511
- Description: Constructed wetlands (CWs) are used in a variety of industries to treat effluent for safe reuse or discharge. They can however take up large areas of land. Adding oxygen can increase treatment efficiency, as it is vital to many nutrient removal pathways, such as nitrification and aerobic respiration. Increasing efficiency can decrease the cost of treatment and reduce land area needed to operate a CW. The study aimed to find the best method of aerating wetlands treating brewery effluent, the potential production of worms and plants in the system and their effects on water treatment. The first experiment tested a hybrid constructed wetland, using small (1.0 m3) ebb and flow filtration additions to a horizontal subsurface flow constructed wetland against nanobubble aeration in a similar horizontal flow wetland cell. It was not possible to add replicates to the study, but findings prompted further investigation into the hybrid setup. Experiment two focussed on the ebb and flow filters within the hybrid system comparing the presence of plants and worms. The ebb and flow filters increased dissolved oxygen (DO) from an average inflow of 3.89 mg/L to an outflow of 5.70 mg/L and decreased the ammonia content of the effluent from 14.8 mg/L to 11.2 mg/L. Swiss chard (Beta vulgaris) was successfully grown in the system and was found not to affect DO. The addition of both Swiss chard and earthworms (Eisenia fetida) was found to decrease PO43- by 17.69 ± 1.36 %. Experiment 3 compared the previous ebb and flow filters to trickle filters with the addition of celery (Apium graveolens) to both systems to determine which filter treated the effluent more effectively. The ebb and flow filters performed better than the trickle filters, increasing the DO by 37.54 ± 0.06 % compared to 19.22 ± 0.06 %. Celery increased this change in both systems, to 44.16 ± 0.06 % in the ebb and flow filters and 30.96 ± 0.06 % in the trickle filters. The ebb and flow filters were also able to decrease the NH3-N concentration by 36.1 ± 0.2 %. This effluent could sustain plant growth; Swiss chard grew at a rate of 0.04 ± 0.02 g/g/d and celery at 0.2 ± 0.1 g/g/d. Ebb and flow filters are better at aerating brewery effluent and decreasing nutrient load than nanobubble pumps and trickle filters. The addition of ebb and flow filters to the CW treating brewery effluent has the potential to improve nutrient removal and provide an edible crop. , Thesis (MSc) -- Faculty of Science, Ichthyology and Fisheries Science, 2024
- Full Text:
- Date Issued: 2024-10-11
Microalgal-bacterial flocs and extracellular polymeric substances for optimum function of integrated algal pond systems
- Authors: Jimoh, Taobat Adekilekun
- Date: 2021-10-29
- Subjects: Flocculation , Extracellular polymeric substances , Water Purification , Sewage Purification Anaerobic treatment , Integrated algae pond systems (IAPS) , Microalgal-bacterial flocs
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/191214 , vital:45071 , 10.21504/10962/191214
- Description: Despite the dire state of sanitation infrastructures, water scarcity, and the dwindling reserve of natural resources due to ever-increasing population growth, implementation of a suitable technology that can provide a solution to all these issues continues to be ignored. The integrated algal pond system (IAPS) is a wastewater treatment technology that combines the processes of anaerobic digestion and photosynthetic oxygenation to achieve wastewater treatment and facilitate the recovery of treated water and resources in the form of biogas and microalgal-bacterial biomass. The natural process of bioflocculation through microalgal-bacterial mutualism and production of extracellular polymeric substances (EPS) in high rate algal oxidation ponds (HRAOPs) of an IAPS increases efficiency of wastewater treatment and potentially enhances harvestability and biomass recovery, which could contribute significantly to the successful establishment of a biorefinery. Using a 500 PE pilot-scale IAPS supplied domestic sewage coupled with laboratory experiments, this study investigated the importance and function of in situ EPS production and MaB-floc formation in HRAOP. A metagenomic study revealed the biological components of the biomass or mixed liquor suspended solids (MLSS) produced in HRAOP and showed that the suspended biomass is composed largely of eukaryotes that were dominated by the colonial microalgae Pseudopediastrum sp. and Desmodesmus sp., and a diverse range of prokaryotes including bacteria and cyanobacteria. Dominance, within the bacterial population, by a sulphur-oxidizing bacterium, Thiothrix which comprised up to 80% of the prokaryotes, coincided with a period of poor flocculation and was therefore rationalized to have contributed to bulking and poor biomass settleability. Otherwise, good flocs were formed in the MLSS with settleability up to 95% and, within 1 h. The formation of MaB-flocs appeared to be dependent on EPS concentration of the mixed liquor due to the observed positive correlation between soluble EPS (S-EPS), biomass concentration, and settleability. The contribution and role of MLSS components towards the formation and sustenance of MaB-flocs were further demonstrated in laboratory experiments using pure strains of microalgae, cyanobacteria, and bacteria. Results showed that pure cultures of dominant microalgae in MLSS, Pseudopediastrum sp. and Desmodesmus sp. achieved a rapid 92 and 75% settleability within 3 h. A self-flocculating filamentous cyanobacterium, Leptolyngbya strain ECCN 20BG was isolated, characterized, and shown to achieve 99% settleability within 5 min by forming large tightly aggregated flocs. In further experiments, this strain was found to improve the settleability of MLSS by an average of 20%. Bacterial strains identified as Bacillus strain ECCN 40b, Bacillus strain ECCN 41b, Planococcus strain ECCN 45b, and Exiguobacterium strain ECCN 46b were also observed to produce sticky EPS-like materials in pure cultures that could also contribute to the aggregation of cells in a mixed environment. Given these results, various factors and/or mechanisms that might enhance microbial aggregation and biomass recovery from HRAOP MLSS were identified in this study and include; (1) dominance by larger colonial microalgae prevents disintegration of MaB-flocs and enhances recovery of biomass from MLSS by gravity sedimentation, (2) presence of filamentous cyanobacteria species that can self-flocculate to form an interwoven network of filaments may play an important role in the structural stability and settleability of MaB-flocs in MLSS, and (3) production of EPS to form the matrix or scaffold whereon all microbial components aggregate to develop a microenvironment. Indeed, all forms of EPS, except for that produced by Bacillus strain ECCN 41b, showed bioflocculating property and were able to serve as flocculants for the recovery of Chlorella, an alga known for its poor settleability. A combination of biochemical analyses and FTIR spectroscopy revealed the importance of carbohydrate enrichment of these biopolymers. Carbohydrate concentration in all forms of EPS was between 12 and 41% suggesting that production of these compounds by microbes within the MLSS contributed to MaB-floc formation. EPS extracted from bulk MLSS and EPS produced by Bacillus strains possessed some surface-active properties that were comparable to Triton X-100, indicating potential application in bioremediation and recovery of oil from contaminated soil and water. In particular, EPS generated from Bacillus strain ECCN 41b displayed relatively distinct properties including the quantity produced (> 500 mg/L), increased viscosity, inability to flocculate microalgal cells, a rhamnolipid content of 32%, and a higher surface-activity. Based on these results, Bacillus strain ECCN 41b was rationalized to produce anionic EPS with potential application in metal or oil recovery. In addition to EPS production, the bacteria Planococcus strain ECCN 45b and Exiguobacterium strain ECCN 46b appeared pigmented. Based on partial characterization using UV/Vis spectrophotometry, thin-layer chromatography, FTIR, and NMR, the pigments produced by these two strains appeared to be identical and were tentatively identified as ketocarotenoids. This study successfully demonstrated the importance of EPS production and formation of MaB-flocs in the MLSS from HRAOP of an IAPS treating domestic sewage. It is evident that increased settleability of the biomass does contribute to the reported efficiency of wastewater treatment by IAPS and would reduce both total suspended solids (TSS) and chemical oxygen demand (COD). In addition, demonstration that this biomass contains products of value such as carotenoids and EPS with potential for commercial use strengthens the idea of using IAPS as a platform technology for innovation of the wastewater treatment process to a biorefinery. , Thesis (PhD) -- Faculty of Science, Institute for Environmental Biotechnology, 2021
- Full Text:
- Date Issued: 2021-10-29
Phthalocyanine-nanoparticle conjugates supported on inorganic nanofibers as photocatalysts for the treatment of biological and organic pollutants as well as for hydrogen generation
- Authors: Mapukata, Sivuyisiwe
- Date: 2021-10-29
- Subjects: Phthalocyanines , Nanofibers , Nanoparticles , Zinc , Hydrogen , Organic water pollutants , Water Purification , Electrospinning , Photocatalysis , Photodegradation , Anti-infective agents
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/192831 , vital:45268 , 10.21504/10962/192831
- Description: This thesis reports on the synthesis, photophysicochemical and photocatalytic properties of various zinc phthalocyanines (Pcs). For enhanced properties and catalyst support, the reported Pcs were conjugated to different nanoparticles (NPs) through chemisorption as well as amide bond formation to yield Pc-NP conjugates. For increased catalyst surface area and catalyst reusability, the Pcs and some of their conjugates were also supported on electrospun inorganic nanofibers i.e. SiO2, hematite (abbreviated Hem and has formula α-Fe2O3), ZnO and TiO2 nanofibers. The effect that the number of charges on a Pc has on its antimicrobial activities was evaluated by comparing the photoactivities of neutral, octacationic and hexadecacationic Pcs against S. aureus, E. coli and C. albicans. The extent of enhancement of their antimicrobial activities upon conjugation (through chemisorption) to Ag NPs was also studied in solution and when supported on SiO2 nanofibers. The results showed that the hexadecacationic complex 3 possessed the best antimicrobial activity against all three microorganisms, in solution and when supported on the SiO2 nanofibers. Covalent conjugation of Pcs with carboxylic acid moieties (complexes 4-6) to amine functionalised NPs (Cys-Ag, NH2-Fe3O4 and Cys-Fe3O4@Ag) resulted in enhanced singlet oxygen generation and thus antibacterial efficiencies. Comparison of the photodegradation efficiencies of semiconductor nanofibers (hematite, ZnO and TiO2) when bare and when modified with a Pc (complex 6) were evaluated. Modification of the nanofibers with the Pc resulted in enhanced photoactivities for the nanofibers with the hematite nanofibers being the best. Modification of the hematite nanofibers with two different Pcs i.e. monosubstituted (complex 5) and an asymmetrical tetrasubstituted Pc (complex 6) showed that complex 6 better enhanced the activity of the nanofibers. Evaluation of the hydrogen generation efficiencies of the bare and modified TiO2 nanofibers calcined at different temperatures demonstrated that the anatase nanofibers calcined at 500 oC possessed the best catalytic efficiency. The efficiency of the TiO2 nanofibers was enhanced in the presence of the Co and Pd NPs as well as a Pc (complex 7), with the extent of enhancement being the greatest for the nanofibers modified with the Pd NPs. The reported findings therefore demonstrate the versatility of applications of Pcs for different water purification techniques when supported on different nanomaterials. , Thesis (PhD) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10-29