Effects of pre-slaughter stress, sex and breed on blood stress indicators, heat shock proteins, glycolytic potential and lamb quality
- Authors: Stempa, Thuthuzelwa
- Date: 2019
- Subjects: Animal welfare , Meat--Quality
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/15376 , vital:40402
- Description: The main objective of this study was to determine the effects of pre-slaughter stress (transportation distance and lairage duration), sex and breed on blood stress indicators, heat shock proteins, post-mortem muscle metabolites (glycogen, glucose, glucose-6-phosphate and lactate), glycolytic potential and meat quality attributes from lambs slaughtered at a commercial abattoir. The study was conducted in a high-throughput commercial abattoir in the Buffalo City local municipality of the Eastern Cape Province, South Africa. A total of a hundred eight-month old Dorper and Merino lambs, both male and female, were used in the study. Blood samples for the analysis of glucose and lactate levels were collected using 10.0 mL disposable Becton Dickinson vacutainer tubes treated with fluoride oxalate (grey top) whereas those for determination of cortisol and heat shock protein 70 (HSPA1A) levels were collected using plasma separating vacutainer tubes (SSTTMII, gold top), and those for analysis of creatine kinase and lactate dehydrogenase were collected using 10.0 ml vacutainer tubes treated with Ethylenediaminetetraacetic acid (EDTA). Meat samples (~50 g) for the measurement of post-mortem energy metabolites (glycogen, lactate glucose-6-phosphate and glucose content) were collected from the Muscularis longimissius thoracis et lumborum (LTL) of each carcass ~30 minutes after slaughter and immediately frozen in liquid nitrogen (-196 oC) to prevent further glycolysis. Cold carcass weight (CCW), warm carcass weight (WCW) and carcass fatness (CF) was measured. Meat pH and temperature were measured at iii 45 minutes (initial pH), 6 hours and 24 hours ultimate pH (pHu) post-mortem. Meat colour coordinates [lightness (L*), redness (a*), yellowness (b*), hue angle (H*), chroma (C*)] were also measured 24 hours after slaughter. Furthermore, thawing loss (TL%), cooking loss (CL%) and warner braztler shear force (WBSF) was measured in the LTL 7 days post slaughter. Breed had a significant effect on plasma HSPA1A, plasma lactate, WCW, CCW, L*, muscle glycogen and WBSF. Sex had a significant effect on plasma HSPA1A and pHu. Pearson‘s correlations showed that meat muscle glycogen was positively correlated to glycolytic potential (P<0.001; r=0.63) and initial pH (P<0.05, r=0.20). Muscle lactate was positively correlated to muscle glucose (P<0.01, r=0.30) and glycolytic potential (P<0.001, r=0.79). A positive correlation was shown between muscle glucose and glycolytic potential (P<0.05, r=0.23). The level of LDH was affected by the distance travelled by lambs prior to slaughter. Lairage duration did not affect the levels of CK and LDH. Principal Component Analysis showed a relationship between distance travelled and CK and LDH; and that CK and LDH also influenced the quality of meat from lambs. With respect to sex and breed, the results indicate that female and Dorper were more stressed than male and Merino respectively. Muscle glycolytic potential and post-mortem metabolites have an impact on the quality of meat produced and the Merino had higher muscle glycogen levels at slaughter; hence they produced better meat quality compared to the Dorper. Moreover, no associations were seen between pHu and blood stress indicators. These results indicate that blood stress indicators at exsanguination cannot be used as useful indicators of dark cutting condition in lamb. A relationship between pHu, muscle glycogen and glycolytic potential was established and thus meat pHu can be used as a reliable indicator of tenderness in lamb.
- Full Text:
- Authors: Stempa, Thuthuzelwa
- Date: 2019
- Subjects: Animal welfare , Meat--Quality
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/15376 , vital:40402
- Description: The main objective of this study was to determine the effects of pre-slaughter stress (transportation distance and lairage duration), sex and breed on blood stress indicators, heat shock proteins, post-mortem muscle metabolites (glycogen, glucose, glucose-6-phosphate and lactate), glycolytic potential and meat quality attributes from lambs slaughtered at a commercial abattoir. The study was conducted in a high-throughput commercial abattoir in the Buffalo City local municipality of the Eastern Cape Province, South Africa. A total of a hundred eight-month old Dorper and Merino lambs, both male and female, were used in the study. Blood samples for the analysis of glucose and lactate levels were collected using 10.0 mL disposable Becton Dickinson vacutainer tubes treated with fluoride oxalate (grey top) whereas those for determination of cortisol and heat shock protein 70 (HSPA1A) levels were collected using plasma separating vacutainer tubes (SSTTMII, gold top), and those for analysis of creatine kinase and lactate dehydrogenase were collected using 10.0 ml vacutainer tubes treated with Ethylenediaminetetraacetic acid (EDTA). Meat samples (~50 g) for the measurement of post-mortem energy metabolites (glycogen, lactate glucose-6-phosphate and glucose content) were collected from the Muscularis longimissius thoracis et lumborum (LTL) of each carcass ~30 minutes after slaughter and immediately frozen in liquid nitrogen (-196 oC) to prevent further glycolysis. Cold carcass weight (CCW), warm carcass weight (WCW) and carcass fatness (CF) was measured. Meat pH and temperature were measured at iii 45 minutes (initial pH), 6 hours and 24 hours ultimate pH (pHu) post-mortem. Meat colour coordinates [lightness (L*), redness (a*), yellowness (b*), hue angle (H*), chroma (C*)] were also measured 24 hours after slaughter. Furthermore, thawing loss (TL%), cooking loss (CL%) and warner braztler shear force (WBSF) was measured in the LTL 7 days post slaughter. Breed had a significant effect on plasma HSPA1A, plasma lactate, WCW, CCW, L*, muscle glycogen and WBSF. Sex had a significant effect on plasma HSPA1A and pHu. Pearson‘s correlations showed that meat muscle glycogen was positively correlated to glycolytic potential (P<0.001; r=0.63) and initial pH (P<0.05, r=0.20). Muscle lactate was positively correlated to muscle glucose (P<0.01, r=0.30) and glycolytic potential (P<0.001, r=0.79). A positive correlation was shown between muscle glucose and glycolytic potential (P<0.05, r=0.23). The level of LDH was affected by the distance travelled by lambs prior to slaughter. Lairage duration did not affect the levels of CK and LDH. Principal Component Analysis showed a relationship between distance travelled and CK and LDH; and that CK and LDH also influenced the quality of meat from lambs. With respect to sex and breed, the results indicate that female and Dorper were more stressed than male and Merino respectively. Muscle glycolytic potential and post-mortem metabolites have an impact on the quality of meat produced and the Merino had higher muscle glycogen levels at slaughter; hence they produced better meat quality compared to the Dorper. Moreover, no associations were seen between pHu and blood stress indicators. These results indicate that blood stress indicators at exsanguination cannot be used as useful indicators of dark cutting condition in lamb. A relationship between pHu, muscle glycogen and glycolytic potential was established and thus meat pHu can be used as a reliable indicator of tenderness in lamb.
- Full Text:
The role of assisted reproduction technologies in improving cattle production under communal and emerging farming systems in Limpopo, Mpumalanga and KwaZulu-Natal, South Africa
- Mugwabana, Thinawanga Joseph
- Authors: Mugwabana, Thinawanga Joseph
- Date: 2018
- Subjects: Beef cattle -- Breeding -- South Africa Beef cattle breeds -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/9100 , vital:34262
- Description: The aim of the study was to determine the effect of assisted reproductive technologies (ARTs) in improving cattle production with the purpose of providing policy directives for the successful implementation of the ART project among communal and emerging livestock systems. The study was conducted under communal and emerging cattle farming systems in Limpopo, Mpumalanga and KwaZulu-Natal provinces. The selected districts in Limpopo were Vhembe, Capricorn, Mopani and Waterberg, in Mpumalanga were Gert Sibande and Ehlanzeni while in KwaZulu-Natal the selected districts were Zululand and Harry Gwala. A total of 282 cows were selected for the study, 38 percent in Limpopo, 32 percent in Mpumalanga and 30 percent in KwaZuluNatal. The cow parameters evaluated were breed type, parity, age, body condition score, frame size and lactation status. An ovsynch protocol which allows for fixed-time artificial insemination (FTAI) was used during the oestrous synchronisation process. A heat mount detector (Karma®) was used to detect oestrous synchronisation response. The dominant cattle breed types were the Bonsmara, Brahman and Nguni. All experimental cows that responded positively to oestrous synchronisation protocol and were inseminated with semen from a Nguni bull. Chi-Square Test of Independence were computed to determine the association among factors. Data was further modelled using the logistic regression model of SAS, establishing the probability of success. Districts, breed type, parity, age, and lactation status did not significantly influence (P > 0.05) conception rate following oestrous synchronisation and timed artificial insemination. However, conception rate was not independent (P < 0.05) of provinces, body condition score and body frame size. Cows in KwaZulu-Natal (66 percent) had significantly higher (P < 0.05) conception rates than those in Limpopo (44 percent) and Mpumalanga (60 percent). Cows of body condition score of ≥ 3.5 (72 percent) had a significantly higher (P < 0.05) conception rate than those of body condition score of ≤ 2.5 (66 percent) and 3 (48 percent). Large (82 percent) framed cows had a significantly higher (P < 0.05) conception rate than small (49 percent) and medium (55 percent) framed cows. Cows in Mpumalanga had more chances to conceive than those of Limpopo and KwaZulu-Natal with odds ratio of 0.605 and 0.863, respectively. Cows in KwaZulu-Natal were in much better body conditions than those from the other two provinces. Cows of body condition score of ≥ 3.5 had more chances to conceive than those of body condition score of ≤ 2.5 and 3 with odds ratio of 0.592 and 0.388, respectively, and the difference was significant (P < 0.05). The study recorded a 100 percent calf survival rate following synchronisation and timed artificial insemination. The breed type, parity, age frame size and lactation status did not significantly influence calving response following oestrous synchronisation and timed artificial insemination (P > 0.05). However, calving rate was not independent of provinces, districts and body condition score (P < 0.05). Calving rate in Mpumalanga (58 percent) and KwaZulu-Natal (54 percent) was significantly higher (P < 0.05) than that recorded in Limpopo Province (36 percent). Calving rate of Gert Sibande (61 percent) and Ehlanzeni (50 percent) districts in Mpumalanga and Zululand (50 percent) and Harry Gwala (61 percent) in KwaZulu-Natal was significantly higher (P < 0.05) than that of the Capricorn (32 percent), Mopani (23 percent and Waterberg (30 percent) in Limpopo Province with the exception of Vhembe (44 percent). Cows with body condition score of ≤ 2.5 (60 percent) had a significantly higher (P < 0.05) calving rate than those with a body condition score of 3 (43 percent). Cows in Mpumalanga had more chances to calve than those in Limpopo and KwaZulu-Natal with odds ratio of 0.076 and 0.537, respectively. Additionally, quantitative data was collected through in-depth interviews using a semi-structured questionnaire. Data collected was managed and coded into themes using the Nvivo Version 11 software programme. Themes and issues that emerged were analysed and interpreted using critical social thinking and systems thinking. The results of the study revealed many factors that could compromise the implementation and adoption of ARTs in the study areas. The general feeling amongst cattle farmers interviewed was that government should address these challenges. A shortage of bulls was the main cause of the low cattle reproduction rate. The Nguni breed type cattle was perceived as the ideal cattle breed for rural areas by respondents. Oestrous synchronisation and artificial insemination can be applied under communal and emerging farming systems with success. From the study results, breeding with small framed animals such as the Nguni type breed under communal and emerging farming systems makes a lot of sense because the breed is known for its low feed maintenance requirement. Furthermore, cattle stakeholders should co-operate and work together to address many of the constraints facing cattle productivity and the implementation and adoption of ARTs in rural areas.
- Full Text:
- Authors: Mugwabana, Thinawanga Joseph
- Date: 2018
- Subjects: Beef cattle -- Breeding -- South Africa Beef cattle breeds -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/9100 , vital:34262
- Description: The aim of the study was to determine the effect of assisted reproductive technologies (ARTs) in improving cattle production with the purpose of providing policy directives for the successful implementation of the ART project among communal and emerging livestock systems. The study was conducted under communal and emerging cattle farming systems in Limpopo, Mpumalanga and KwaZulu-Natal provinces. The selected districts in Limpopo were Vhembe, Capricorn, Mopani and Waterberg, in Mpumalanga were Gert Sibande and Ehlanzeni while in KwaZulu-Natal the selected districts were Zululand and Harry Gwala. A total of 282 cows were selected for the study, 38 percent in Limpopo, 32 percent in Mpumalanga and 30 percent in KwaZuluNatal. The cow parameters evaluated were breed type, parity, age, body condition score, frame size and lactation status. An ovsynch protocol which allows for fixed-time artificial insemination (FTAI) was used during the oestrous synchronisation process. A heat mount detector (Karma®) was used to detect oestrous synchronisation response. The dominant cattle breed types were the Bonsmara, Brahman and Nguni. All experimental cows that responded positively to oestrous synchronisation protocol and were inseminated with semen from a Nguni bull. Chi-Square Test of Independence were computed to determine the association among factors. Data was further modelled using the logistic regression model of SAS, establishing the probability of success. Districts, breed type, parity, age, and lactation status did not significantly influence (P > 0.05) conception rate following oestrous synchronisation and timed artificial insemination. However, conception rate was not independent (P < 0.05) of provinces, body condition score and body frame size. Cows in KwaZulu-Natal (66 percent) had significantly higher (P < 0.05) conception rates than those in Limpopo (44 percent) and Mpumalanga (60 percent). Cows of body condition score of ≥ 3.5 (72 percent) had a significantly higher (P < 0.05) conception rate than those of body condition score of ≤ 2.5 (66 percent) and 3 (48 percent). Large (82 percent) framed cows had a significantly higher (P < 0.05) conception rate than small (49 percent) and medium (55 percent) framed cows. Cows in Mpumalanga had more chances to conceive than those of Limpopo and KwaZulu-Natal with odds ratio of 0.605 and 0.863, respectively. Cows in KwaZulu-Natal were in much better body conditions than those from the other two provinces. Cows of body condition score of ≥ 3.5 had more chances to conceive than those of body condition score of ≤ 2.5 and 3 with odds ratio of 0.592 and 0.388, respectively, and the difference was significant (P < 0.05). The study recorded a 100 percent calf survival rate following synchronisation and timed artificial insemination. The breed type, parity, age frame size and lactation status did not significantly influence calving response following oestrous synchronisation and timed artificial insemination (P > 0.05). However, calving rate was not independent of provinces, districts and body condition score (P < 0.05). Calving rate in Mpumalanga (58 percent) and KwaZulu-Natal (54 percent) was significantly higher (P < 0.05) than that recorded in Limpopo Province (36 percent). Calving rate of Gert Sibande (61 percent) and Ehlanzeni (50 percent) districts in Mpumalanga and Zululand (50 percent) and Harry Gwala (61 percent) in KwaZulu-Natal was significantly higher (P < 0.05) than that of the Capricorn (32 percent), Mopani (23 percent and Waterberg (30 percent) in Limpopo Province with the exception of Vhembe (44 percent). Cows with body condition score of ≤ 2.5 (60 percent) had a significantly higher (P < 0.05) calving rate than those with a body condition score of 3 (43 percent). Cows in Mpumalanga had more chances to calve than those in Limpopo and KwaZulu-Natal with odds ratio of 0.076 and 0.537, respectively. Additionally, quantitative data was collected through in-depth interviews using a semi-structured questionnaire. Data collected was managed and coded into themes using the Nvivo Version 11 software programme. Themes and issues that emerged were analysed and interpreted using critical social thinking and systems thinking. The results of the study revealed many factors that could compromise the implementation and adoption of ARTs in the study areas. The general feeling amongst cattle farmers interviewed was that government should address these challenges. A shortage of bulls was the main cause of the low cattle reproduction rate. The Nguni breed type cattle was perceived as the ideal cattle breed for rural areas by respondents. Oestrous synchronisation and artificial insemination can be applied under communal and emerging farming systems with success. From the study results, breeding with small framed animals such as the Nguni type breed under communal and emerging farming systems makes a lot of sense because the breed is known for its low feed maintenance requirement. Furthermore, cattle stakeholders should co-operate and work together to address many of the constraints facing cattle productivity and the implementation and adoption of ARTs in rural areas.
- Full Text:
Effect of post-slaughter handling on physico-chemical and microbiological quality of red meat along the distribution chain in the Eastern Cape Province, South Africa
- Authors: Rani, Zikhona Theodora
- Date: 2015
- Subjects: Meat -- Microbiology Meat -- Transportation -- South Africa -- Eastern Cape Meat -- Quality -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2490 , vital:27875
- Description: The broad objective of the study was to investigate the effect of post-slaughter handling in the distribution chain on red meat quality and safety. A survey was conducted among 300 consumers and 100 meat handlers in five different municipalities (Buffalo City, Nkonkobe, Ngqushwa, Lukhanje and Amahlathi) in the Eastern Cape Province of South Africa to investigate their perceptions on meat quality and safety, together with challenges faced by meat handlers during the distribution of meat from the abattoir to retailers. The microbiological profile and physico-chemical quality of red meat at different stages of the abattoir to retail outlets in the distribution chain were also determined. Swabs (n=216) and meat samples (n=450) were collected from beef, pork and mutton carcasses during the loading process of carcasses into trucks at the abattoir, when offloading carcasses at the supply points and during marketing. Physico-chemical qualities such as colour (L* - lightness, b* - redness and a* - yellowness) and meat pH measurements were taken at each point. To determine the microbiological profiles of the carcasses, four microbiological parameters were considered: Total bacteria count (general bacteria), coliform count (related to hygiene and indicator for pathogens), Escherichia coli (Gram-negative pathogen) and Staphylococcus aureus (Gram-positive pathogen). Two types of packaging (vacuum and overwrapping) were used to determine their effect on shelf-life and microbiological quality of red meat under the normal marketing conditions over a storage duration of 15 days. The results from the study showed low awareness of consumers about the pathogenic diseases which arise from meat. A strong significant association (p ˂ 0.05) between educational status and awareness on meat safety was observed. Most of the consumers perceived that quality goes beyond safety such that 35.6 percent of the respondents indicated that they did not have a problem with consuming spoiled meat, whilst the remaining 64.4 percent indicated that they would r eject spoiled meat. Although retailers indicated that they take meat safety into consideration in their shops, 92 percent of the retailers revealed that they do not perform microbial assessment of meat in their shops. A series of loading and off-loading, temperature fluctuations, environmental temperatures and ques during offloading were reported as the major challenges during transportation of carcasses from the abattoir to the supply points. The microbial counts were significantly (p<0.05) higher in samples from the commercial abattoir than in those from the communal abattoir. Escherichia coli was the predominant microbial contaminant in the samples from both abattoirs. When following the chain, total bacterial count (TBC), coliform count (CC) and the levels of E. coli contamination increased progressively between the loading and the off-loading points (5.1 to 7.9 log10 CFU/cm2; 5.0 to 5.6 log10 CFU/cm2 and 2.7 to 3.7 log10 CFU/cm2, respectively). The storage period, meat type, distance during transportation and temperature were found to have a significant impact on the microbial levels during the distribution of carcasses. Distribution stage had a significant effect (p<0.05) on some of the physico- chemical meat quality attributes and differences in the lightness (L*) and redness (a*) values between the loading, off-loading and display points were observed. Consumers perceived retailer class as one of the factors influencing meat quality, but according to the instrumental measurements retailer class did not have a significant effect on physico-chemical meat quality. However, distance and storage duration significantly (p<0.05) affected (L*) and (a*) values in the meat during distribution chain. Vacuum and overwrapping packaging significantly affected (p<0.05) the shelf life of meat. Therefore, it was concluded that post-slaughter handling during the distribution chain affects the physico- chemical, microbiological and shelf-life of meat.
- Full Text:
- Authors: Rani, Zikhona Theodora
- Date: 2015
- Subjects: Meat -- Microbiology Meat -- Transportation -- South Africa -- Eastern Cape Meat -- Quality -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2490 , vital:27875
- Description: The broad objective of the study was to investigate the effect of post-slaughter handling in the distribution chain on red meat quality and safety. A survey was conducted among 300 consumers and 100 meat handlers in five different municipalities (Buffalo City, Nkonkobe, Ngqushwa, Lukhanje and Amahlathi) in the Eastern Cape Province of South Africa to investigate their perceptions on meat quality and safety, together with challenges faced by meat handlers during the distribution of meat from the abattoir to retailers. The microbiological profile and physico-chemical quality of red meat at different stages of the abattoir to retail outlets in the distribution chain were also determined. Swabs (n=216) and meat samples (n=450) were collected from beef, pork and mutton carcasses during the loading process of carcasses into trucks at the abattoir, when offloading carcasses at the supply points and during marketing. Physico-chemical qualities such as colour (L* - lightness, b* - redness and a* - yellowness) and meat pH measurements were taken at each point. To determine the microbiological profiles of the carcasses, four microbiological parameters were considered: Total bacteria count (general bacteria), coliform count (related to hygiene and indicator for pathogens), Escherichia coli (Gram-negative pathogen) and Staphylococcus aureus (Gram-positive pathogen). Two types of packaging (vacuum and overwrapping) were used to determine their effect on shelf-life and microbiological quality of red meat under the normal marketing conditions over a storage duration of 15 days. The results from the study showed low awareness of consumers about the pathogenic diseases which arise from meat. A strong significant association (p ˂ 0.05) between educational status and awareness on meat safety was observed. Most of the consumers perceived that quality goes beyond safety such that 35.6 percent of the respondents indicated that they did not have a problem with consuming spoiled meat, whilst the remaining 64.4 percent indicated that they would r eject spoiled meat. Although retailers indicated that they take meat safety into consideration in their shops, 92 percent of the retailers revealed that they do not perform microbial assessment of meat in their shops. A series of loading and off-loading, temperature fluctuations, environmental temperatures and ques during offloading were reported as the major challenges during transportation of carcasses from the abattoir to the supply points. The microbial counts were significantly (p<0.05) higher in samples from the commercial abattoir than in those from the communal abattoir. Escherichia coli was the predominant microbial contaminant in the samples from both abattoirs. When following the chain, total bacterial count (TBC), coliform count (CC) and the levels of E. coli contamination increased progressively between the loading and the off-loading points (5.1 to 7.9 log10 CFU/cm2; 5.0 to 5.6 log10 CFU/cm2 and 2.7 to 3.7 log10 CFU/cm2, respectively). The storage period, meat type, distance during transportation and temperature were found to have a significant impact on the microbial levels during the distribution of carcasses. Distribution stage had a significant effect (p<0.05) on some of the physico- chemical meat quality attributes and differences in the lightness (L*) and redness (a*) values between the loading, off-loading and display points were observed. Consumers perceived retailer class as one of the factors influencing meat quality, but according to the instrumental measurements retailer class did not have a significant effect on physico-chemical meat quality. However, distance and storage duration significantly (p<0.05) affected (L*) and (a*) values in the meat during distribution chain. Vacuum and overwrapping packaging significantly affected (p<0.05) the shelf life of meat. Therefore, it was concluded that post-slaughter handling during the distribution chain affects the physico- chemical, microbiological and shelf-life of meat.
- Full Text:
Perceptions on ante-mortem welfare, quantitation of pain and pregnancy biomarkers, muscular fibre architecture and quality of Dohne Merino offal
- Authors: Fayemi, Peter Olutope
- Date: 2013
- Subjects: Merino sheep , Slaughtering and slaughter-houses -- By-products , Biochemical markers , Meat -- Quality , Consumers' preferences , Cooking (Variety meats) , Livestock -- Transportation
- Language: English
- Type: Thesis , Doctoral , PhD (Animal Science)
- Identifier: vital:11824 , http://hdl.handle.net/10353/d1007573 , Merino sheep , Slaughtering and slaughter-houses -- By-products , Biochemical markers , Meat -- Quality , Consumers' preferences , Cooking (Variety meats) , Livestock -- Transportation
- Description: Sheep farming is practiced extensively in South Africa for its significant contributions to the livestock, wool and meat industries. The sheep farming sector in the country has approximately 13,800 farmers with commercial and communal sheep farmers making up 58 percent and 42 percent of the entire work force (Directorate of Agricultural Information Services, 2008). An estimate of 28.8 million sheep and flock size ranging between ≤ 50 and ≥ 1800 exist in various South African provinces. Although the national herd size is unevenly distributed provincially most of the herds are found in the Eastern Cape (30 percent) followed by the Northern Cape (25 percent), Free State (20 percent) and the Western Cape (11 percent) respectively (Agriculture, Forestry and Fisheries, 2011). Over twenty indigenous and locally developed sheep breeds are managed where about 69 percent of the land area is available for their grazing nation-wide (Campher et al., 1998; Palmer and Ainslie, 2006). Common among the indigenous breeds are the Afrikaner, Blackhead Persian, Blackhead Speckled Persian, Blinkhaar Ronderib, Damara, Karakul, Namaqua Afrikaner, Pedi, Redhead Persian, Redhead Speckled, Swazi and Zulu. The locally developed breeds include Dorper, Van Rooy and Merinos. The local breeds developed from Merinos consist of the Afrino, Dormer, Dohne Merino and South African mutton Merino (Hammond, 2000; Pranisha, 2004; Hinton, 2006; Sorma et al., 2012). All these sheep breeds are best suited for providing by-products such as wool, meat, hide, milk or a combination of products (Dave and Meadowcroft, 1996; Jensen, 2009). The indigenous and locally developed sheep were bred to meet the growing demand for its by-products (Peters et al., 2010). Expectedly, sheep farmers therefore, make use of the products from these sheep as a means of livelihood and sustenance of a viable local society (Cloete and Olivier, 2010).
- Full Text:
- Authors: Fayemi, Peter Olutope
- Date: 2013
- Subjects: Merino sheep , Slaughtering and slaughter-houses -- By-products , Biochemical markers , Meat -- Quality , Consumers' preferences , Cooking (Variety meats) , Livestock -- Transportation
- Language: English
- Type: Thesis , Doctoral , PhD (Animal Science)
- Identifier: vital:11824 , http://hdl.handle.net/10353/d1007573 , Merino sheep , Slaughtering and slaughter-houses -- By-products , Biochemical markers , Meat -- Quality , Consumers' preferences , Cooking (Variety meats) , Livestock -- Transportation
- Description: Sheep farming is practiced extensively in South Africa for its significant contributions to the livestock, wool and meat industries. The sheep farming sector in the country has approximately 13,800 farmers with commercial and communal sheep farmers making up 58 percent and 42 percent of the entire work force (Directorate of Agricultural Information Services, 2008). An estimate of 28.8 million sheep and flock size ranging between ≤ 50 and ≥ 1800 exist in various South African provinces. Although the national herd size is unevenly distributed provincially most of the herds are found in the Eastern Cape (30 percent) followed by the Northern Cape (25 percent), Free State (20 percent) and the Western Cape (11 percent) respectively (Agriculture, Forestry and Fisheries, 2011). Over twenty indigenous and locally developed sheep breeds are managed where about 69 percent of the land area is available for their grazing nation-wide (Campher et al., 1998; Palmer and Ainslie, 2006). Common among the indigenous breeds are the Afrikaner, Blackhead Persian, Blackhead Speckled Persian, Blinkhaar Ronderib, Damara, Karakul, Namaqua Afrikaner, Pedi, Redhead Persian, Redhead Speckled, Swazi and Zulu. The locally developed breeds include Dorper, Van Rooy and Merinos. The local breeds developed from Merinos consist of the Afrino, Dormer, Dohne Merino and South African mutton Merino (Hammond, 2000; Pranisha, 2004; Hinton, 2006; Sorma et al., 2012). All these sheep breeds are best suited for providing by-products such as wool, meat, hide, milk or a combination of products (Dave and Meadowcroft, 1996; Jensen, 2009). The indigenous and locally developed sheep were bred to meet the growing demand for its by-products (Peters et al., 2010). Expectedly, sheep farmers therefore, make use of the products from these sheep as a means of livelihood and sustenance of a viable local society (Cloete and Olivier, 2010).
- Full Text:
The effect of moringa oleifera leaf meal on growth perfomance, gut integrity, bone strenght, quality and oxidative stability of meat from broiler chickens
- Authors: Nkukwana, Tobela T
- Date: 2012
- Subjects: Moringa oleifera , Chickens -- Nutrition , Chickens -- Feeding and feeds , Broilers (Chickens)
- Language: English
- Type: Thesis , Doctoral , PhD (Animal Science)
- Identifier: vital:11820 , http://hdl.handle.net/10353/d1006835 , Moringa oleifera , Chickens -- Nutrition , Chickens -- Feeding and feeds , Broilers (Chickens)
- Description: This study was designed was to determine the effects of additive supplementation of Moringa oleifera leaf meal on growth performance, digestibility, digestive organ size, intestinal integrity, bone ash content and bone breaking strength, as well as meat yield and quality of broiler chickens. A total of 2400 day-old unsexed Cobb-500 broiler chicks were randomly allocated to 5 treatment groups: T1, positive control, 668 g/ton Salinomycin and 500 g/ton Albac; T2, T3 and T4 contained graded levels of MOLM at 1 percent, 3 percent and 5 percent of dry matter (DM) intake, respectively; and T5, a negative control (0 percent additives) in a complete randomized design experiment. Except for week one, FI and FCR was highest (P < 0.05) in T4 birds; while T1 birds had the highest FI in the period of 22 to 27d (P < 0.05). Throughout the production period, birds supplemented with MOLM had the highest BW (P < 0.05) than the birds fed the control diets. Feed intake (FI) and feed conversion ratio (FCR) among treatments was highest (P < 0.05) in T4 birds during the period of 8 to 14 d; and was highest (P < 0.05) for T1 birds in the period of 22 to 27d. Protein efficiency ratio (PER) and energy utilization efficiency (EEU) ratios were statistically significant among treatments (P < 0.05). However, dietary treatments had no effect (P > 0.05) on the weights of the heart, liver, spleen, or the gizzard, although the bursa for T2 birds was the lightest (P < 0.05); while gizzard erosion score was highest in T2 birds. All of the nutrients measured, except for fat, had negative intercepts that were significantly different (P < 0.05) from zero, indicating the presence of endogenous fecal losses. Tibiae length (TL) was highest in T2. The dried defatted weight (DW) was heaviest (P < 0.05) for T3 (11.20 ± 0.347) and T5 (11.08 ± 0.328). A positive correlation (r = 0.667; P < 0.01) between TW and DW was observed. There were no dietary effects on bone breaking strength (BBS), but T1 tibiae had highest resistance to breaking force (T1 > T4 > T3 > T2 > T5). Calcium was highest (P < 0.05) in T1; and lowest inT2 and T5. Phosphorus levels were lowest (P < 0.05) in T1; and highest (P < 0.05) in T5 compared. The highest Ca: P ratio was obtained in T4 (P < 0.05); while the ash percent was highest (P < 0.05) in T1. Drip loss increased as L* values increased; and a negative correlation was observed between L* and pH. On D1, C18: 0 and C22 in T2, while C15:0 was highest in T4. On D1, C20:2, C20:3n6 and C22:6n3 were highest in T2 (P < 0.05); T4 had the highest C18:3n6 (P < 0.05), while C20:2 was highest in T5 (P < 0.05). The P/S ratio on D1 was highest in T4; while n-6/n-3 was highest in T1; and n-3 was highest in T3. On D8, the n-3 was highest in T1 (P < 0.05). Results of the current study show that supplementation of M. oleifera leaf at additive levels of up to 5 percent of the bird’s DMI does have the potential to influence the bird performance without any detrimental effects on nutrient utilization, bird health, bone strength and/or meat quality, which can be concluded that MOLM enhanced the bird’s genetic potential for optimal productivity.
- Full Text:
- Authors: Nkukwana, Tobela T
- Date: 2012
- Subjects: Moringa oleifera , Chickens -- Nutrition , Chickens -- Feeding and feeds , Broilers (Chickens)
- Language: English
- Type: Thesis , Doctoral , PhD (Animal Science)
- Identifier: vital:11820 , http://hdl.handle.net/10353/d1006835 , Moringa oleifera , Chickens -- Nutrition , Chickens -- Feeding and feeds , Broilers (Chickens)
- Description: This study was designed was to determine the effects of additive supplementation of Moringa oleifera leaf meal on growth performance, digestibility, digestive organ size, intestinal integrity, bone ash content and bone breaking strength, as well as meat yield and quality of broiler chickens. A total of 2400 day-old unsexed Cobb-500 broiler chicks were randomly allocated to 5 treatment groups: T1, positive control, 668 g/ton Salinomycin and 500 g/ton Albac; T2, T3 and T4 contained graded levels of MOLM at 1 percent, 3 percent and 5 percent of dry matter (DM) intake, respectively; and T5, a negative control (0 percent additives) in a complete randomized design experiment. Except for week one, FI and FCR was highest (P < 0.05) in T4 birds; while T1 birds had the highest FI in the period of 22 to 27d (P < 0.05). Throughout the production period, birds supplemented with MOLM had the highest BW (P < 0.05) than the birds fed the control diets. Feed intake (FI) and feed conversion ratio (FCR) among treatments was highest (P < 0.05) in T4 birds during the period of 8 to 14 d; and was highest (P < 0.05) for T1 birds in the period of 22 to 27d. Protein efficiency ratio (PER) and energy utilization efficiency (EEU) ratios were statistically significant among treatments (P < 0.05). However, dietary treatments had no effect (P > 0.05) on the weights of the heart, liver, spleen, or the gizzard, although the bursa for T2 birds was the lightest (P < 0.05); while gizzard erosion score was highest in T2 birds. All of the nutrients measured, except for fat, had negative intercepts that were significantly different (P < 0.05) from zero, indicating the presence of endogenous fecal losses. Tibiae length (TL) was highest in T2. The dried defatted weight (DW) was heaviest (P < 0.05) for T3 (11.20 ± 0.347) and T5 (11.08 ± 0.328). A positive correlation (r = 0.667; P < 0.01) between TW and DW was observed. There were no dietary effects on bone breaking strength (BBS), but T1 tibiae had highest resistance to breaking force (T1 > T4 > T3 > T2 > T5). Calcium was highest (P < 0.05) in T1; and lowest inT2 and T5. Phosphorus levels were lowest (P < 0.05) in T1; and highest (P < 0.05) in T5 compared. The highest Ca: P ratio was obtained in T4 (P < 0.05); while the ash percent was highest (P < 0.05) in T1. Drip loss increased as L* values increased; and a negative correlation was observed between L* and pH. On D1, C18: 0 and C22 in T2, while C15:0 was highest in T4. On D1, C20:2, C20:3n6 and C22:6n3 were highest in T2 (P < 0.05); T4 had the highest C18:3n6 (P < 0.05), while C20:2 was highest in T5 (P < 0.05). The P/S ratio on D1 was highest in T4; while n-6/n-3 was highest in T1; and n-3 was highest in T3. On D8, the n-3 was highest in T1 (P < 0.05). Results of the current study show that supplementation of M. oleifera leaf at additive levels of up to 5 percent of the bird’s DMI does have the potential to influence the bird performance without any detrimental effects on nutrient utilization, bird health, bone strength and/or meat quality, which can be concluded that MOLM enhanced the bird’s genetic potential for optimal productivity.
- Full Text:
- «
- ‹
- 1
- ›
- »