Electrospun nanofibers as solid phase extraction sorbents and support for alkylphenols colorimetric probes
- Authors: Tancu, Yolanda
- Date: 2014
- Subjects: Nanofibers , Electrospinning , Extraction (Chemistry) , Sorbents , Phenols , Colorimetry , Transmission electron microscopy , High resolution spectroscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4486 , http://hdl.handle.net/10962/d1012997
- Description: The thesis reports on fabricating alternative solid phase extraction (SPE) sorbents and colorimetric probes based on electrospun nanofibers for alkylphenols (APs). Hydroxyl methylated styrene [poly(co-styrene-CH₃OH)] and 3-oxobutanoate styrene [poly(co-styrene-OCOCH₃COCH₃)] copolymers were synthesized and fabricated into sorbent materials by electro-spinning/spraying. The fabricated morphologies consisting of bead free fibers, beaded fibers and particles were evaluated as SPE sorbents using batch experiments. Electropun fibers proved to be better sorbents as they exhibited extraction efficiency that exceeded 95% compared to 60% for beaded fibers and 40% for particles. In view to reduce sample and solvent volumes, smooth fibers were packed into pipette tips as SPE devices that yielded quantitative recoveries of APs from spiked wastewater samples. Recoveries ranged from 70% to 125% with LOD of 0.008, 0.01 and 0.1 μg mL⁻¹ for 4-tert octylphenol (4-t-OP), 4-octylphenol (4-OP) and 4-nonylphenol (4-NP) respectively, when using high performance liquid chromatography-fluorescence detector (HPLC-FLD). Furthermore, amino functionalised polydiacetylene polymers (PDAs), citrate capped gold (AuNPs) and silver nanoparticles (AgNPs) were evaluated as colorimetric probes for visual detection of APs. In colloidal studies, AuNPs probe showed a colour change from wine red to green upon introduction of analyte. UV-vis spectroscopy revealed the shifting of the surface plasmon resonance (SPR) peak from 525 nm to 729 nm induced by aggregation of AuNPs. For AgNPs probe, a colour change was observed from yellowish green to brown. Transmission electron microscopy (TEM) studies showed growth of AgNPs. A presumed oxidation of the analyte, forming an absorbing compound at 279 nm in both AgNPs and PDAs probes was also observed. For PDAs probe the colour change was from purple to pink. Concentrations as low as 30 μg mL⁻¹ were detectable in all colloidal based probes. Further colorimetric investigations were conducted with electrospun AuNPs-nylon 6 fiber mat. A colour change from purplish red to navy blue at concentrations of 1000 μg mL⁻¹ was observed. Electrospun AgNPs –nylon 6 fiber mat did not show a distinct colour change. High resolution scanning electron microscopy (HRSEM) revealed the analyte inducing the assembly of AuNPs and AgNPs as they covered the surface of the nanofiber mat. Electrospun nanofibers are a platform for analysis and thus tuning their chemistry will lead to sensitive and selective methods
- Full Text:
- Date Issued: 2014
- Authors: Tancu, Yolanda
- Date: 2014
- Subjects: Nanofibers , Electrospinning , Extraction (Chemistry) , Sorbents , Phenols , Colorimetry , Transmission electron microscopy , High resolution spectroscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4486 , http://hdl.handle.net/10962/d1012997
- Description: The thesis reports on fabricating alternative solid phase extraction (SPE) sorbents and colorimetric probes based on electrospun nanofibers for alkylphenols (APs). Hydroxyl methylated styrene [poly(co-styrene-CH₃OH)] and 3-oxobutanoate styrene [poly(co-styrene-OCOCH₃COCH₃)] copolymers were synthesized and fabricated into sorbent materials by electro-spinning/spraying. The fabricated morphologies consisting of bead free fibers, beaded fibers and particles were evaluated as SPE sorbents using batch experiments. Electropun fibers proved to be better sorbents as they exhibited extraction efficiency that exceeded 95% compared to 60% for beaded fibers and 40% for particles. In view to reduce sample and solvent volumes, smooth fibers were packed into pipette tips as SPE devices that yielded quantitative recoveries of APs from spiked wastewater samples. Recoveries ranged from 70% to 125% with LOD of 0.008, 0.01 and 0.1 μg mL⁻¹ for 4-tert octylphenol (4-t-OP), 4-octylphenol (4-OP) and 4-nonylphenol (4-NP) respectively, when using high performance liquid chromatography-fluorescence detector (HPLC-FLD). Furthermore, amino functionalised polydiacetylene polymers (PDAs), citrate capped gold (AuNPs) and silver nanoparticles (AgNPs) were evaluated as colorimetric probes for visual detection of APs. In colloidal studies, AuNPs probe showed a colour change from wine red to green upon introduction of analyte. UV-vis spectroscopy revealed the shifting of the surface plasmon resonance (SPR) peak from 525 nm to 729 nm induced by aggregation of AuNPs. For AgNPs probe, a colour change was observed from yellowish green to brown. Transmission electron microscopy (TEM) studies showed growth of AgNPs. A presumed oxidation of the analyte, forming an absorbing compound at 279 nm in both AgNPs and PDAs probes was also observed. For PDAs probe the colour change was from purple to pink. Concentrations as low as 30 μg mL⁻¹ were detectable in all colloidal based probes. Further colorimetric investigations were conducted with electrospun AuNPs-nylon 6 fiber mat. A colour change from purplish red to navy blue at concentrations of 1000 μg mL⁻¹ was observed. Electrospun AgNPs –nylon 6 fiber mat did not show a distinct colour change. High resolution scanning electron microscopy (HRSEM) revealed the analyte inducing the assembly of AuNPs and AgNPs as they covered the surface of the nanofiber mat. Electrospun nanofibers are a platform for analysis and thus tuning their chemistry will lead to sensitive and selective methods
- Full Text:
- Date Issued: 2014
Capillary membrane-immobilised polyphenol oxidase and the bioremediation of industrial phenolic effluent
- Authors: Edwards, Wade
- Date: 1999
- Subjects: Membranes (Technology) , Effluent quality , Pollutants , Phenols , Water -- Purification
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4095 , http://hdl.handle.net/10962/d1008458
- Description: Waste-generating industrialisation is intrinsically associated with population and economic proliferation. This places considerable emphasis on South Africa's water shortage due to the integral relationship between population growth rate and infrastructure development. Of the various types of industry-generated effluents, those containing organic pollutants such as phenols are generally difficult to remediate. Much work has been reported in the literature on the use of enzymes for the removal of phenols from these waste-streams but little application of this bioremediation approach has reached practical fruition. This study focuses on integrating and synergistically combining the advantages of enzyme-mediated dephenolisation of synthetic and industrial effluent with that of membrane teclmology. The ability of the enzyme polyphenol oxidase to convert phenol and a number of its derivatives to chemically reactive o-quinones has been reported extensively in the literature. These o-quinones can then physically be removed from solution using various precipitation or adsorption techniques. The enzyme is, however, plagued by a product-induced phenomenon known as suicide inactivation, which renders it inactive and thus limits its application as a bioremediation tool. Integrating membrane technology with the enzyme's catalytic ability by immobilising polyphenol oxidase onto polysulphone and poly(ether sulphone) capillary membranes enabled the physical removal of these inhibitory products from the micro-environment of the immobilised enzyme which therefore increased the phenol conversion capability of the immobilised biocatalyst. Under non-immobilised conditions it was found that when exposed to a mixture of various phenols the substrate preference of the enzyme is a function of the R-group. Under immobilised conditions, however, the substrate preference of the enzyme becomes a function of certain transport constraints imposed by the capillary membrane itself. Furthermore, by integrating a quinone-removal process in the enzyme-immobilised bioreactor configuration, a 21-fold increase in the amount of substrate converted per Unit enzyme was observed when compared to the conversion capacity of the inunobilised enzyme without the product removal step. Comparisons were also made using different membrane bioreactor configurations (orientating the capillaries transverse as opposed to parallel to the module axis) and different immobilisation matrices (poly(ether sulphone) and polysulphone capillary membranes). Conversion efficiencies as high as 77% were maintained for several hours using the combination of transverse-flow modules and novel polysulphone capillary membranes. It was therefore concluded that immobilisation of polyphenol oxidase on capillary membranes does indeed show considerable potential for future development.
- Full Text:
- Date Issued: 1999
- Authors: Edwards, Wade
- Date: 1999
- Subjects: Membranes (Technology) , Effluent quality , Pollutants , Phenols , Water -- Purification
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4095 , http://hdl.handle.net/10962/d1008458
- Description: Waste-generating industrialisation is intrinsically associated with population and economic proliferation. This places considerable emphasis on South Africa's water shortage due to the integral relationship between population growth rate and infrastructure development. Of the various types of industry-generated effluents, those containing organic pollutants such as phenols are generally difficult to remediate. Much work has been reported in the literature on the use of enzymes for the removal of phenols from these waste-streams but little application of this bioremediation approach has reached practical fruition. This study focuses on integrating and synergistically combining the advantages of enzyme-mediated dephenolisation of synthetic and industrial effluent with that of membrane teclmology. The ability of the enzyme polyphenol oxidase to convert phenol and a number of its derivatives to chemically reactive o-quinones has been reported extensively in the literature. These o-quinones can then physically be removed from solution using various precipitation or adsorption techniques. The enzyme is, however, plagued by a product-induced phenomenon known as suicide inactivation, which renders it inactive and thus limits its application as a bioremediation tool. Integrating membrane technology with the enzyme's catalytic ability by immobilising polyphenol oxidase onto polysulphone and poly(ether sulphone) capillary membranes enabled the physical removal of these inhibitory products from the micro-environment of the immobilised enzyme which therefore increased the phenol conversion capability of the immobilised biocatalyst. Under non-immobilised conditions it was found that when exposed to a mixture of various phenols the substrate preference of the enzyme is a function of the R-group. Under immobilised conditions, however, the substrate preference of the enzyme becomes a function of certain transport constraints imposed by the capillary membrane itself. Furthermore, by integrating a quinone-removal process in the enzyme-immobilised bioreactor configuration, a 21-fold increase in the amount of substrate converted per Unit enzyme was observed when compared to the conversion capacity of the inunobilised enzyme without the product removal step. Comparisons were also made using different membrane bioreactor configurations (orientating the capillaries transverse as opposed to parallel to the module axis) and different immobilisation matrices (poly(ether sulphone) and polysulphone capillary membranes). Conversion efficiencies as high as 77% were maintained for several hours using the combination of transverse-flow modules and novel polysulphone capillary membranes. It was therefore concluded that immobilisation of polyphenol oxidase on capillary membranes does indeed show considerable potential for future development.
- Full Text:
- Date Issued: 1999
- «
- ‹
- 1
- ›
- »