Synthesis of gatifloxacin, an important fluoroquinolone antibiotic using continuous flow technology
- Authors: Moyo, McQuillan
- Date: 2024-04
- Subjects: Antibiotics , Drug resistance in microorganisms , Chemical processes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/64204 , vital:73664
- Description: Gatifloxacin belongs to an important class of antibiotics known as fluoroquinolones (the fourth generation). Bristol-Myers Squibb (BMS) introduced gatifloxacin to the market in 1999 under the brand name Tequin® for treating respiratory tract infections. It has recently been widely employed as an ophthalmic solution for treating bacterial conjunctivitis. There is limited literature describing the complete synthesis of gatifloxacin; however, ciprofloxacin, a similar fluoroquinolone, has received much attention recently and is a good guide in the synthesis. Even though there are several similarities between ciprofloxacin and gatifloxacin, key reactions towards the synthesis of gatifloxacin have not been reported, which forms a knowledge gap, for instance, the three steps leading to the synthesis of the benzoyl chloride intermediate. It is estimated that 70-90 % of the active pharmaceutical ingredients (APIs) in drugs consumed in sub-Saharan Africa are imported, mainly from India, China and Europe. To reduce dependence and improve access to life-saving drugs, Africa needs to develop cutting-edge technology that is more advanced than traditional means. We envisage that employing continuous flow technology in synthesising gatifloxacin, previously developed in a batch setup, will offer an improved, future-proof process. Thus, this research aimed to create a more efficient multi-step continuous flow process for synthesising gatifloxacin compared to the current batch methods. The first chapter of this thesis provides an extensive literature review on the synthesis of gatifloxacin and its sister drug, ciprofloxacin. The foreground is based on the manufacture and consumption of APIs, particularly antibiotics. Continuous flow technology is also introduced and discussed as the solution to bridging the gap in Africa’s demand for API manufacturing, which significantly lags. Chapter two describes the results and discusses findings on the continuous flow synthesis of gatifloxacin. A seven-step process is described with reaction optimisation studies for each step, starting from 2,4,5-trifluoro-3-hydroxybenzoic acid. An alternative shorter route (with six steps) is also offered, incorporating microwave-assisted technology instead of the traditional batch process. We also describe several elegant multistep processes for synthesising gatifloxacin and its intermediates, achieved by combining several compatible, optimised steps. Subsequently, Chapter 3 describes all the experimental details of our research. In this study, efficient continuous flow procedures were developed to synthesise gatifloxacin. The seven-step continuous flow procedure we developed afforded gatifloxacin (54 % overall isolated yield) in a total residence time of 15.6 mins, a significant improvement from the reported batch process (52 % overall yield and over 103 hours reaction time). , Thesis (PhD) -- Faculty of Science, School of Biomolecular & Chemical Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Moyo, McQuillan
- Date: 2024-04
- Subjects: Antibiotics , Drug resistance in microorganisms , Chemical processes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/64204 , vital:73664
- Description: Gatifloxacin belongs to an important class of antibiotics known as fluoroquinolones (the fourth generation). Bristol-Myers Squibb (BMS) introduced gatifloxacin to the market in 1999 under the brand name Tequin® for treating respiratory tract infections. It has recently been widely employed as an ophthalmic solution for treating bacterial conjunctivitis. There is limited literature describing the complete synthesis of gatifloxacin; however, ciprofloxacin, a similar fluoroquinolone, has received much attention recently and is a good guide in the synthesis. Even though there are several similarities between ciprofloxacin and gatifloxacin, key reactions towards the synthesis of gatifloxacin have not been reported, which forms a knowledge gap, for instance, the three steps leading to the synthesis of the benzoyl chloride intermediate. It is estimated that 70-90 % of the active pharmaceutical ingredients (APIs) in drugs consumed in sub-Saharan Africa are imported, mainly from India, China and Europe. To reduce dependence and improve access to life-saving drugs, Africa needs to develop cutting-edge technology that is more advanced than traditional means. We envisage that employing continuous flow technology in synthesising gatifloxacin, previously developed in a batch setup, will offer an improved, future-proof process. Thus, this research aimed to create a more efficient multi-step continuous flow process for synthesising gatifloxacin compared to the current batch methods. The first chapter of this thesis provides an extensive literature review on the synthesis of gatifloxacin and its sister drug, ciprofloxacin. The foreground is based on the manufacture and consumption of APIs, particularly antibiotics. Continuous flow technology is also introduced and discussed as the solution to bridging the gap in Africa’s demand for API manufacturing, which significantly lags. Chapter two describes the results and discusses findings on the continuous flow synthesis of gatifloxacin. A seven-step process is described with reaction optimisation studies for each step, starting from 2,4,5-trifluoro-3-hydroxybenzoic acid. An alternative shorter route (with six steps) is also offered, incorporating microwave-assisted technology instead of the traditional batch process. We also describe several elegant multistep processes for synthesising gatifloxacin and its intermediates, achieved by combining several compatible, optimised steps. Subsequently, Chapter 3 describes all the experimental details of our research. In this study, efficient continuous flow procedures were developed to synthesise gatifloxacin. The seven-step continuous flow procedure we developed afforded gatifloxacin (54 % overall isolated yield) in a total residence time of 15.6 mins, a significant improvement from the reported batch process (52 % overall yield and over 103 hours reaction time). , Thesis (PhD) -- Faculty of Science, School of Biomolecular & Chemical Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Creating digital materials for Antimicrobial Resistance One Health awareness and behaviour change for Rhodes University peer educators
- Authors: Patnala, Shraddha
- Date: 2021-10-29
- Subjects: Anti-infective agents South Africa , Drug resistance , Antibiotics , Drug resistance in microorganisms , Health education South Africa , Health risk communication South Africa , Digital media South Africa , Peer counseling South Africa , One Health (Initiative) , Social Behaviour Change Communication (SBCC) , Rhodes University
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/191001 , vital:45048
- Description: Antimicrobial resistance (AMR) is an urgent, global health problem that stems from the inappropriate use of and poor adherence to antibiotics that treat diseases in human beings. It is further exacerbated by the proliferation of antibiotics into the food chain, particularly from the overuse and misuse of antibiotics in agricultural, meat, and dairy production. The recently developed World Health Organisation (WHO) One Health (OH) approach encompasses and acknowledges the various interconnected pathways that drive AMR between the human, animal, and environmental spheres. Until recently, AMR health challenges have been viewed primarily through a biomedical lens, but this study draws on the more holistic perspective that the One Health approach offers. AMR from food sources (AMR-OH) is an underrepresented topic of research. Creating digital health communication for low-literate end-users on this topic using the One Health approach is an emerging field of research. AMR-OH has not been extensively covered in health communication campaigns and requires developing context-specific digital educational materials, such as the ones this study presents. This study draws on Social Behaviour Change Communication (SBCC) theory elements to create a suggested approach to disseminate AMR-OH information. This intervention was aimed at low-health-literate end-users to accomplish two objectives. First, create awareness and improve knowledge about AMR-OH via a video. Second, offer feasible, easily implementable behaviour change actions in the form of an infographic comprising four food safety steps (Clean, Separate, Cook, and Chill). The study was conducted in three phases. First, recruit participants and conduct a literature review to identify the effective SBCC elements of health communication intervention design. Second, conduct a needs assessment to gauge the volunteering participants’ familiarity with digital media and their current health literacy on AMR-OH. Third, conceptualise and design the two AMR-OH digital educational materials (a video and accompanying infographic). The materials were first evaluated by the researcher using the Clear Communication Index (CCI) test, and then shared with the participants via WhatsApp to be evaluated by them, using two end-user tests: the Patient Education Material Assessment Tool (PEMAT) and the Suitability Assessment of Materials (SAM) test. These two tests assessed the materials’ readability, understandability, and actionability. A post-evaluation, semi-structured interview (SSI) was then conducted with the participants. Deductive thematic analysis was conducted on the SSI data and analysed using the five design benchmarks as themes: Ease of Use of Technology, Clarity of Content, Appropriate Format, Target Audience Resonance (Appropriate for target audience), and Clear calls to Action (Actionable). The rapid onset of COVID-19 restrictions forced the project to scale down and shift entirely online. The study could be conducted due to the active and enthusiastic virtual participation of two Rhodes University Peer Educators (PEs) whose contribution was vital to developing and evaluating the materials. The needs assessment showed that the PEs were comfortable using WhatsApp, had reliable internet connection when on campus, and used this social media platform for professional and personal communication. This assessment also showed that they had prior knowledge of AMR but only from the human health perspective. The video and infographic scored high on the Clear Communication Index, 93.3% and 94.4%, respectively. The PEs’ evaluation of the materials was also high on the PEMAT and SAM assessments: video narration (100%, 80% respectively), video (100%, 99% respectively), and infographic (86%, 90% respectively). This study produced an easy-to-use, accessible and appropriate online repository of AMR-OH information in a novel format with actionable steps. The post-evaluation SSI revealed that the materials and the channel of delivery were welcomed. The PEs expressed their confidence in receiving, using, and sharing this novel presentation of evidence and solutions-based information about AMR-OH. They further highlighted that this is the first time they have received and evaluated context-specific digital multimedia about AMR-OH and that this information equipped them to adopt the food safety behaviours – namely, the four food safety steps. This study demonstrates that the theory-informed creation of engaging digital media for AMR-OH is feasible and viable. Furthermore, it affirms that engaging digital media for AMR-OH can be created to enhance the knowledge of end-users about this health issue. The scaled-down approach created a blueprint to implement a more extensive intervention in the future, informed by this intervention’s methods and tools. Lastly, this blueprint for a particular conceptualisation of an AMR-OH digital media intervention provides effective and empowering tools with which the PEs can disseminate this information to the university's support staff. , Thesis (MA) -- Faculty of Humanities, School of Journalism and Media Studies, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Patnala, Shraddha
- Date: 2021-10-29
- Subjects: Anti-infective agents South Africa , Drug resistance , Antibiotics , Drug resistance in microorganisms , Health education South Africa , Health risk communication South Africa , Digital media South Africa , Peer counseling South Africa , One Health (Initiative) , Social Behaviour Change Communication (SBCC) , Rhodes University
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/191001 , vital:45048
- Description: Antimicrobial resistance (AMR) is an urgent, global health problem that stems from the inappropriate use of and poor adherence to antibiotics that treat diseases in human beings. It is further exacerbated by the proliferation of antibiotics into the food chain, particularly from the overuse and misuse of antibiotics in agricultural, meat, and dairy production. The recently developed World Health Organisation (WHO) One Health (OH) approach encompasses and acknowledges the various interconnected pathways that drive AMR between the human, animal, and environmental spheres. Until recently, AMR health challenges have been viewed primarily through a biomedical lens, but this study draws on the more holistic perspective that the One Health approach offers. AMR from food sources (AMR-OH) is an underrepresented topic of research. Creating digital health communication for low-literate end-users on this topic using the One Health approach is an emerging field of research. AMR-OH has not been extensively covered in health communication campaigns and requires developing context-specific digital educational materials, such as the ones this study presents. This study draws on Social Behaviour Change Communication (SBCC) theory elements to create a suggested approach to disseminate AMR-OH information. This intervention was aimed at low-health-literate end-users to accomplish two objectives. First, create awareness and improve knowledge about AMR-OH via a video. Second, offer feasible, easily implementable behaviour change actions in the form of an infographic comprising four food safety steps (Clean, Separate, Cook, and Chill). The study was conducted in three phases. First, recruit participants and conduct a literature review to identify the effective SBCC elements of health communication intervention design. Second, conduct a needs assessment to gauge the volunteering participants’ familiarity with digital media and their current health literacy on AMR-OH. Third, conceptualise and design the two AMR-OH digital educational materials (a video and accompanying infographic). The materials were first evaluated by the researcher using the Clear Communication Index (CCI) test, and then shared with the participants via WhatsApp to be evaluated by them, using two end-user tests: the Patient Education Material Assessment Tool (PEMAT) and the Suitability Assessment of Materials (SAM) test. These two tests assessed the materials’ readability, understandability, and actionability. A post-evaluation, semi-structured interview (SSI) was then conducted with the participants. Deductive thematic analysis was conducted on the SSI data and analysed using the five design benchmarks as themes: Ease of Use of Technology, Clarity of Content, Appropriate Format, Target Audience Resonance (Appropriate for target audience), and Clear calls to Action (Actionable). The rapid onset of COVID-19 restrictions forced the project to scale down and shift entirely online. The study could be conducted due to the active and enthusiastic virtual participation of two Rhodes University Peer Educators (PEs) whose contribution was vital to developing and evaluating the materials. The needs assessment showed that the PEs were comfortable using WhatsApp, had reliable internet connection when on campus, and used this social media platform for professional and personal communication. This assessment also showed that they had prior knowledge of AMR but only from the human health perspective. The video and infographic scored high on the Clear Communication Index, 93.3% and 94.4%, respectively. The PEs’ evaluation of the materials was also high on the PEMAT and SAM assessments: video narration (100%, 80% respectively), video (100%, 99% respectively), and infographic (86%, 90% respectively). This study produced an easy-to-use, accessible and appropriate online repository of AMR-OH information in a novel format with actionable steps. The post-evaluation SSI revealed that the materials and the channel of delivery were welcomed. The PEs expressed their confidence in receiving, using, and sharing this novel presentation of evidence and solutions-based information about AMR-OH. They further highlighted that this is the first time they have received and evaluated context-specific digital multimedia about AMR-OH and that this information equipped them to adopt the food safety behaviours – namely, the four food safety steps. This study demonstrates that the theory-informed creation of engaging digital media for AMR-OH is feasible and viable. Furthermore, it affirms that engaging digital media for AMR-OH can be created to enhance the knowledge of end-users about this health issue. The scaled-down approach created a blueprint to implement a more extensive intervention in the future, informed by this intervention’s methods and tools. Lastly, this blueprint for a particular conceptualisation of an AMR-OH digital media intervention provides effective and empowering tools with which the PEs can disseminate this information to the university's support staff. , Thesis (MA) -- Faculty of Humanities, School of Journalism and Media Studies, 2021
- Full Text:
- Date Issued: 2021-10-29
Lipid nanocarriers : a novel approach to delivering ophthalmic clarithromycin
- Authors: Makoni, Pedzisai Anotida
- Date: 2021
- Subjects: Clarithromycin , Nanomedicine , Nanostructures , Antibiotics , Eye -- Diseases -- Treatment , Ocular pharmacology , Ophthalmic drugs , Karatitis -- Chemotherapy
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171678 , vital:42109 , 10.21504/10962/171678
- Description: The feasibility of incorporating clarithromycin (CLA) into innovative solid lipid nanoparticles (SLN) and nanostructured lipi d carriers (NLC) using hot emulsification ultrasonication (HEUS) was investigated. This approach was investigated in an attempt to address the shortcomings associated with the use of lyophilized parenteral formulations administered via the ocular route suc h as toxic reactions, intolerance and patient discomfort due to frequent insti llation of topical solutions of CLA. In particular, sustained release approaches to delivery may enhance precorneal retention, increase ocular availability and permit dose reduction or use of a longer dosing frequency when treating ocular non - tuberculous m ycobacterial (NTM) keratitis infections. This approach may potentially improve the delivery of CLA to the eye, thereby addressing some or all of the unmet clinical needs described vide infra . Prior to initiating pre - formulation, formulation development a nd optimization studies of CLA - loaded SLN and/or NLC, Design of Experiments (DoE), specifically a Central Composite Design (CCD) was used in conjunction with Response Surface Methodology (RSM) to develop and optimize a suitable method for the quantitative determination of CLA in pharmaceutical formulations and for monitoring CLA release from SLN and/or NLC in vitro . A simple, accurate, precise, sensitive and stability - indicating reversed phase - high performance liquid chromatography (RP - HPLC) method with ele ctrochemical (EC) detection was developed, validated and optimized for the in vitro analysis of CLA loaded SLN and/or NLC formulations. Pre - formulation studies were undertaken to investigate the thermal stability of CLA and bulk lipids to facilitate the s election of lipid excipients for the manufacture of nanocarriers in addition to establishing compatibility of CLA with the excipients. It was established that CLA was thermostable up to a temperature of approximately 300 °C thereby indicating that HEUS cou ld be used for the manufacture of CLA - loaded SLN and/or NLC. Lipid screening revealed that CLA i s, in general, poorly soluble in solid and liquid lipids however a combination of stearic acid (SA) and Transcutol ® HP (THP) exhibited the best dissolution pote ntial for CLA of all lipids tested . Stearic acid appears to exist as polymorphic form B prior to exposure to heat however occurs as the form C polymorph following heating at 85 °C for one hour. The best ratio for the mixture of SA and THP for the manufactu re of CLA - NLC ii was an 80:20 ( w/w ) ratio of SA: THP as the two lipids are miscible in this ratio and exhibited the greatest dissolution potential for CLA. Furthermore, an investigation of binary mixtures of CLA/SA and SA/Transcutol ® HP, in addition to eutect ic mixtures of CLA, SA and Transcutol ® HP, revealed no obvious interaction between CLA and the lipids selected for the production of the nanocarriers. Due to the relatively high solubility of CLA in THP in comparison to SA, NLC are likely to exhibit a hig her loading capacity (LC) and encapsulation efficiency (EE) for CLA than SLN. Consequently the feasibility of incorporating CLA (10% w/w ) into NLC was investigated and evaluation of the production of SLN was not undertaken as the production of these might not result in the manufacture of a delivery technology with a high EE and LC for CLA. Tween ® 20 was used as the surfactant as it is readily available, exhibits little or no cytotoxicity and is relatively cheap. Polyethylene glycol (PEG) was used as a coati ng polymer to impart muco - adhesive properties the formulated CLA - NLC. Response surface methodology (RSM) in conjunction with DoE, specifically a Box - Behnken Design (BBD) used as a screening design was used to identify a formulation composition which would produce a product that would meet the pre - defined target critical quality attributes (CQA) for the nanoparticles viz. particle size (PS) in the nano - range, polydispersity index (PDI) < 0.5, Zeta Potential (ZP) ≥ ± 30 mV, and EE > 80%. The formulation composition identified was subsequently used for the optimization of the manufacturing parameters viz. sonication time and amplitude, using a Central Composite Design (CCD) . The LC and EE, in vitro CLA release, cytotoxicity, osmolarity, pH, degree of crystallinity and lipid modification, elemental analysis and surface morphology of the optimized batch was investigated and mon itored to ensure that CLA - loaded NLC, of the desirable quality, had been produced. On the day of manufacture the mean PS and PDI of the optimized CLA - loaded NLC formulation adjusted to physiological osmolarity (250 – 450 mOsm/kg) was 461.9 ± 40.16 nm and 0. 523 ± 0.104, respectively. The ZP for the optimized NLC generated on the day of manufacture using HPLC grade water as the dispersion medium was - 20.5 ± 4.82 mV. The pH and osmolarity of the optimized CLA - loaded NLC formulation was 7.76 ± 0.01 and 316 ± iii 2 m Osm/Kg, respectively and the EE was 88.62 ± 0.23 %. The optimized NLC exhibited a decreased crystallinity in comparison to the bulk lipid materials. DSC, WAXS and FT - IR revealed that CLA was molecularly dispersed in the nanocarriers. The optimized CLA - load ed NLC exhibited muco - adhesive properties, when tested under stationary conditions using laser doppler anemometry (LDA). The optimized formulation also exhibited sustained release of CLA over 24 hours during in vitro release testing and CLA release was bes t described using the Baker - Lonsdale model . The cumulative % CLA released over 24 hours was 56.13 ± 0.23% and mass balance analysis revealed 41.38 ± 0.02% CLA had been retained in the NLC. In vitro cytotoxicity testing revealed that the optimized CLA - NLC w ere less cytotoxic to HeLa cells when compared to CLA alone and further confirmed that the lipids and excipients used in these studies were of GRAS status . Stability studies revealed that the EE reduced over 28 days by 14.42% and 5.14% when stored at 4 °C and 22 °C , respectively. In addition, the particle size increased from the nm to μm range for samples stored at 22 °C. The findings are a good starting point but require further optimization to ensure prolongation of stability. In addition , the technology requires additional developmental studies and a powder for reconstitution for use as a single - dose considered as single dose packaging may be a solution to the compromised formulation stability observed in these studies. The CLA - NLC produced in these stu dies exhibit sound product attributes which serve as a useful foundation for the novel delivery of antibiotics to the eye. The results suggest that the optimized NLC have the potential to enhance precorneal retention and increase ocular availability of CLA , which in turn may be useful to reduce the required dose and dosing frequency when administering CLA as a reconstituted solution to treat susceptible organisms that infect ocular tissues.
- Full Text:
- Date Issued: 2021
- Authors: Makoni, Pedzisai Anotida
- Date: 2021
- Subjects: Clarithromycin , Nanomedicine , Nanostructures , Antibiotics , Eye -- Diseases -- Treatment , Ocular pharmacology , Ophthalmic drugs , Karatitis -- Chemotherapy
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171678 , vital:42109 , 10.21504/10962/171678
- Description: The feasibility of incorporating clarithromycin (CLA) into innovative solid lipid nanoparticles (SLN) and nanostructured lipi d carriers (NLC) using hot emulsification ultrasonication (HEUS) was investigated. This approach was investigated in an attempt to address the shortcomings associated with the use of lyophilized parenteral formulations administered via the ocular route suc h as toxic reactions, intolerance and patient discomfort due to frequent insti llation of topical solutions of CLA. In particular, sustained release approaches to delivery may enhance precorneal retention, increase ocular availability and permit dose reduction or use of a longer dosing frequency when treating ocular non - tuberculous m ycobacterial (NTM) keratitis infections. This approach may potentially improve the delivery of CLA to the eye, thereby addressing some or all of the unmet clinical needs described vide infra . Prior to initiating pre - formulation, formulation development a nd optimization studies of CLA - loaded SLN and/or NLC, Design of Experiments (DoE), specifically a Central Composite Design (CCD) was used in conjunction with Response Surface Methodology (RSM) to develop and optimize a suitable method for the quantitative determination of CLA in pharmaceutical formulations and for monitoring CLA release from SLN and/or NLC in vitro . A simple, accurate, precise, sensitive and stability - indicating reversed phase - high performance liquid chromatography (RP - HPLC) method with ele ctrochemical (EC) detection was developed, validated and optimized for the in vitro analysis of CLA loaded SLN and/or NLC formulations. Pre - formulation studies were undertaken to investigate the thermal stability of CLA and bulk lipids to facilitate the s election of lipid excipients for the manufacture of nanocarriers in addition to establishing compatibility of CLA with the excipients. It was established that CLA was thermostable up to a temperature of approximately 300 °C thereby indicating that HEUS cou ld be used for the manufacture of CLA - loaded SLN and/or NLC. Lipid screening revealed that CLA i s, in general, poorly soluble in solid and liquid lipids however a combination of stearic acid (SA) and Transcutol ® HP (THP) exhibited the best dissolution pote ntial for CLA of all lipids tested . Stearic acid appears to exist as polymorphic form B prior to exposure to heat however occurs as the form C polymorph following heating at 85 °C for one hour. The best ratio for the mixture of SA and THP for the manufactu re of CLA - NLC ii was an 80:20 ( w/w ) ratio of SA: THP as the two lipids are miscible in this ratio and exhibited the greatest dissolution potential for CLA. Furthermore, an investigation of binary mixtures of CLA/SA and SA/Transcutol ® HP, in addition to eutect ic mixtures of CLA, SA and Transcutol ® HP, revealed no obvious interaction between CLA and the lipids selected for the production of the nanocarriers. Due to the relatively high solubility of CLA in THP in comparison to SA, NLC are likely to exhibit a hig her loading capacity (LC) and encapsulation efficiency (EE) for CLA than SLN. Consequently the feasibility of incorporating CLA (10% w/w ) into NLC was investigated and evaluation of the production of SLN was not undertaken as the production of these might not result in the manufacture of a delivery technology with a high EE and LC for CLA. Tween ® 20 was used as the surfactant as it is readily available, exhibits little or no cytotoxicity and is relatively cheap. Polyethylene glycol (PEG) was used as a coati ng polymer to impart muco - adhesive properties the formulated CLA - NLC. Response surface methodology (RSM) in conjunction with DoE, specifically a Box - Behnken Design (BBD) used as a screening design was used to identify a formulation composition which would produce a product that would meet the pre - defined target critical quality attributes (CQA) for the nanoparticles viz. particle size (PS) in the nano - range, polydispersity index (PDI) < 0.5, Zeta Potential (ZP) ≥ ± 30 mV, and EE > 80%. The formulation composition identified was subsequently used for the optimization of the manufacturing parameters viz. sonication time and amplitude, using a Central Composite Design (CCD) . The LC and EE, in vitro CLA release, cytotoxicity, osmolarity, pH, degree of crystallinity and lipid modification, elemental analysis and surface morphology of the optimized batch was investigated and mon itored to ensure that CLA - loaded NLC, of the desirable quality, had been produced. On the day of manufacture the mean PS and PDI of the optimized CLA - loaded NLC formulation adjusted to physiological osmolarity (250 – 450 mOsm/kg) was 461.9 ± 40.16 nm and 0. 523 ± 0.104, respectively. The ZP for the optimized NLC generated on the day of manufacture using HPLC grade water as the dispersion medium was - 20.5 ± 4.82 mV. The pH and osmolarity of the optimized CLA - loaded NLC formulation was 7.76 ± 0.01 and 316 ± iii 2 m Osm/Kg, respectively and the EE was 88.62 ± 0.23 %. The optimized NLC exhibited a decreased crystallinity in comparison to the bulk lipid materials. DSC, WAXS and FT - IR revealed that CLA was molecularly dispersed in the nanocarriers. The optimized CLA - load ed NLC exhibited muco - adhesive properties, when tested under stationary conditions using laser doppler anemometry (LDA). The optimized formulation also exhibited sustained release of CLA over 24 hours during in vitro release testing and CLA release was bes t described using the Baker - Lonsdale model . The cumulative % CLA released over 24 hours was 56.13 ± 0.23% and mass balance analysis revealed 41.38 ± 0.02% CLA had been retained in the NLC. In vitro cytotoxicity testing revealed that the optimized CLA - NLC w ere less cytotoxic to HeLa cells when compared to CLA alone and further confirmed that the lipids and excipients used in these studies were of GRAS status . Stability studies revealed that the EE reduced over 28 days by 14.42% and 5.14% when stored at 4 °C and 22 °C , respectively. In addition, the particle size increased from the nm to μm range for samples stored at 22 °C. The findings are a good starting point but require further optimization to ensure prolongation of stability. In addition , the technology requires additional developmental studies and a powder for reconstitution for use as a single - dose considered as single dose packaging may be a solution to the compromised formulation stability observed in these studies. The CLA - NLC produced in these stu dies exhibit sound product attributes which serve as a useful foundation for the novel delivery of antibiotics to the eye. The results suggest that the optimized NLC have the potential to enhance precorneal retention and increase ocular availability of CLA , which in turn may be useful to reduce the required dose and dosing frequency when administering CLA as a reconstituted solution to treat susceptible organisms that infect ocular tissues.
- Full Text:
- Date Issued: 2021
Evaluation of an NADPH-dependent assay for inhibition screening of Salmonella enterica DOXP Reguctoisomerase for identification of novel drug hit compounds
- Authors: Ngcongco, Khanyisile
- Date: 2020
- Subjects: 1-Deoxy-D-xylulose 5-phosphate , Antibiotics , Drug development , Salmonella , Enterobacteriaceae , Vaccines , Plasmodium falciparum , Mycobacterium tuberculosis
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167132 , vital:41440
- Description: Invasive non-typhoidal Salmonella, caused by the intracellular pathogen Salmonella enterica, has emerged as a major cause of bloodstream infections. It remains a neglected infection responsible for many deaths in Africa, as it fails to receive the level of support that is given to most better known infections. There are currently no vaccines against invasive non-typhoidal Salmonella. First-line antibiotics have been used for treatment, however, the rise in the resistance of the bacteria against these antibiotics has made treatment of invasive salmonellosis into a clinical problem. Therefore, the discovery of new compounds for the development of antibiotic drugs is required. Central metabolic pathways can be a useful source for identifying drug targets and among these is the non-mevalonate pathway, one of the pathways used for the biosynthesis of isoprenoid precursors. The second step of the non-mevalonate pathway involves the NADPH-dependent reduction of 1-deoxy-D-xylulose 5-phosphate (DOXP) into 2-C-methyl-D-erythritol 4-phosphate (MEP). 1-Deoxy-D-xylulose 5-phosphate (DOXP) reductoisomerase plays a vital role in the catalysis of this reaction and requires NADPH and divalent metal cations as co-factors for its activity. In this investigation recombinant DOXP reductoisomerase from Salmonella enterica, Plasmodium falciparum and Mycobacterium tuberculosis were biochemically characterized as potential targets for developing drugs that could be used as treatment of the disease. The expression and nickel-chelate affinity purification of S. enterica DOXP reductoisomerase in a fully functional native state was successfully achieved. However, the expression and purification of P. falciparum DXR and M. tuberculosis DXR was unsuccessful due to the formation of insoluble inclusion bodies. Although alternative purification strategies were explored, including dialysis and slow dilution, these proteins remained insoluble, making their functional analysis not possible. An NADPH-dependent enzyme assay was used to determine the activity of S. enterica DXR. This assay monitors the reduction of DOXP to MEP by measuring the absorbance at 340 nm, which reflects the concentration of NADPH. An alternative assay, resazurin reduction, which monitors the NADPH-dependent reduction of resazurin to resorufin, was explored for detecting enzyme activity. The recombinant S. enterica DOXP reductoisomerase had a specific activity of 0.126 ± 0.0014 μmol/min/mg protein and a Km and Vmax of 881 μM and 0.249 μmol/min/mg respectively. FR900098, a derivative of fosmidomycin, is a well-known inhibitor of DXR, however, the sensitivity of S. enterica DXR towards FR900098 has not yet been reported. The NADPH dependent enzyme and resazurin reduction assays were used to determine whether FR900098 has enzyme inhibitory effects against S. enterica DXR. Upon confirming that FR900098 is able to inhibit S. enterica DXR, FR900098 was used as a control compound in the screening of novel compounds. The S. enterica DXR enzyme was screened for inhibition by the collection of compounds from the Pathogen Box. Compounds that exhibited the desired inhibitory activity, referred to as ‘hits’ were selected for further investigation. These hits were confirmed using the NADPH-dependent enzyme assay, resulting in the identification of two different DXR inhibitor compounds, MMV002816, also known as diethylcarbamazine, and MMV228911. The inhibitory concentration (IC50) values of FR900098, MMV002816 and MMV228911 against S. enterica DXR were 1.038 μM, 2.173 μM and 6.861 μM respectively. The binding mode of these compounds to S. enterica DXR could lead to the discovery of novel druggable sites on the enzyme and stimulate the development of new antibiotics that can be used for treating Salmonella infections.
- Full Text:
- Date Issued: 2020
- Authors: Ngcongco, Khanyisile
- Date: 2020
- Subjects: 1-Deoxy-D-xylulose 5-phosphate , Antibiotics , Drug development , Salmonella , Enterobacteriaceae , Vaccines , Plasmodium falciparum , Mycobacterium tuberculosis
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167132 , vital:41440
- Description: Invasive non-typhoidal Salmonella, caused by the intracellular pathogen Salmonella enterica, has emerged as a major cause of bloodstream infections. It remains a neglected infection responsible for many deaths in Africa, as it fails to receive the level of support that is given to most better known infections. There are currently no vaccines against invasive non-typhoidal Salmonella. First-line antibiotics have been used for treatment, however, the rise in the resistance of the bacteria against these antibiotics has made treatment of invasive salmonellosis into a clinical problem. Therefore, the discovery of new compounds for the development of antibiotic drugs is required. Central metabolic pathways can be a useful source for identifying drug targets and among these is the non-mevalonate pathway, one of the pathways used for the biosynthesis of isoprenoid precursors. The second step of the non-mevalonate pathway involves the NADPH-dependent reduction of 1-deoxy-D-xylulose 5-phosphate (DOXP) into 2-C-methyl-D-erythritol 4-phosphate (MEP). 1-Deoxy-D-xylulose 5-phosphate (DOXP) reductoisomerase plays a vital role in the catalysis of this reaction and requires NADPH and divalent metal cations as co-factors for its activity. In this investigation recombinant DOXP reductoisomerase from Salmonella enterica, Plasmodium falciparum and Mycobacterium tuberculosis were biochemically characterized as potential targets for developing drugs that could be used as treatment of the disease. The expression and nickel-chelate affinity purification of S. enterica DOXP reductoisomerase in a fully functional native state was successfully achieved. However, the expression and purification of P. falciparum DXR and M. tuberculosis DXR was unsuccessful due to the formation of insoluble inclusion bodies. Although alternative purification strategies were explored, including dialysis and slow dilution, these proteins remained insoluble, making their functional analysis not possible. An NADPH-dependent enzyme assay was used to determine the activity of S. enterica DXR. This assay monitors the reduction of DOXP to MEP by measuring the absorbance at 340 nm, which reflects the concentration of NADPH. An alternative assay, resazurin reduction, which monitors the NADPH-dependent reduction of resazurin to resorufin, was explored for detecting enzyme activity. The recombinant S. enterica DOXP reductoisomerase had a specific activity of 0.126 ± 0.0014 μmol/min/mg protein and a Km and Vmax of 881 μM and 0.249 μmol/min/mg respectively. FR900098, a derivative of fosmidomycin, is a well-known inhibitor of DXR, however, the sensitivity of S. enterica DXR towards FR900098 has not yet been reported. The NADPH dependent enzyme and resazurin reduction assays were used to determine whether FR900098 has enzyme inhibitory effects against S. enterica DXR. Upon confirming that FR900098 is able to inhibit S. enterica DXR, FR900098 was used as a control compound in the screening of novel compounds. The S. enterica DXR enzyme was screened for inhibition by the collection of compounds from the Pathogen Box. Compounds that exhibited the desired inhibitory activity, referred to as ‘hits’ were selected for further investigation. These hits were confirmed using the NADPH-dependent enzyme assay, resulting in the identification of two different DXR inhibitor compounds, MMV002816, also known as diethylcarbamazine, and MMV228911. The inhibitory concentration (IC50) values of FR900098, MMV002816 and MMV228911 against S. enterica DXR were 1.038 μM, 2.173 μM and 6.861 μM respectively. The binding mode of these compounds to S. enterica DXR could lead to the discovery of novel druggable sites on the enzyme and stimulate the development of new antibiotics that can be used for treating Salmonella infections.
- Full Text:
- Date Issued: 2020
Targeting allosteric sites of Escherichia coli heat shock protein 70 for antibiotic development
- Authors: Okeke, Chiamaka Jessica
- Date: 2019
- Subjects: Heat shock proteins , Escherichia coli , Allosteric proteins , Antibiotics , Molecular chaperones , Ligands (Biochemistry) , Molecular dynamics , Principal components analysis , South African Natural Compounds Database
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/115998 , vital:34287
- Description: Hsp70s are members of the heat shock proteins family with a molecular weight of 70-kDa and are the most abundant group in bacterial and eukaryotic systems, hence the most extensively studied ones. These proteins are molecular chaperones that play a significant role in protein homeostasis by facilitating appropriate folding of proteins, preventing proteins from aggregating and misfolding. They are also involved in translocation of proteins into subcellular compartments and protection of cells against stress. Stress caused by environmental or biological factors affects the functionality of the cell. In response to these stressful conditions, up-regulation of Hsp70s ensures that the cells are protected by balancing out unfolded proteins giving them ample time to repair denatured proteins. Hsp70s is connected to numerous illnesses such as autoimmune and neurodegenerative diseases, bacterial infection, cancer, malaria, and obesity. The multi-functional nature of Hsp70s predisposes them as promising therapeutic targets. Hsp70s play vital roles in various cell developments, and survival pathways, therefore targeting this protein will provide a new avenue towards the discovery of active therapeutic agents for the treatment of a wide range of diseases. Allosteric sites of these proteins in its multi-conformational states have not been explored for inhibitory properties hence the aim of this study. This study aims at identifying allosteric sites that inhibit the ATPase and substrate binding activities using computational approaches. Using E. coli as a model organism, molecular docking for high throughput virtual screening was carried out using 623 compounds from the South African Natural Compounds Database (SANCDB; https://sancdb.rubi.ru.ac.za/) against identified allosteric sites. Ligands with the highest binding affinity (good binders) interacting with critical allosteric residues that are druggable were identified. Molecular dynamics (MD) simulation was also performed on the identified hits to assess for protein-inhibitor complex stability. Finally, principal component analysis (PCA) was performed to understand the structural dynamics of the ligand-free and ligand-bound structures during MD simulation.
- Full Text:
- Date Issued: 2019
- Authors: Okeke, Chiamaka Jessica
- Date: 2019
- Subjects: Heat shock proteins , Escherichia coli , Allosteric proteins , Antibiotics , Molecular chaperones , Ligands (Biochemistry) , Molecular dynamics , Principal components analysis , South African Natural Compounds Database
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/115998 , vital:34287
- Description: Hsp70s are members of the heat shock proteins family with a molecular weight of 70-kDa and are the most abundant group in bacterial and eukaryotic systems, hence the most extensively studied ones. These proteins are molecular chaperones that play a significant role in protein homeostasis by facilitating appropriate folding of proteins, preventing proteins from aggregating and misfolding. They are also involved in translocation of proteins into subcellular compartments and protection of cells against stress. Stress caused by environmental or biological factors affects the functionality of the cell. In response to these stressful conditions, up-regulation of Hsp70s ensures that the cells are protected by balancing out unfolded proteins giving them ample time to repair denatured proteins. Hsp70s is connected to numerous illnesses such as autoimmune and neurodegenerative diseases, bacterial infection, cancer, malaria, and obesity. The multi-functional nature of Hsp70s predisposes them as promising therapeutic targets. Hsp70s play vital roles in various cell developments, and survival pathways, therefore targeting this protein will provide a new avenue towards the discovery of active therapeutic agents for the treatment of a wide range of diseases. Allosteric sites of these proteins in its multi-conformational states have not been explored for inhibitory properties hence the aim of this study. This study aims at identifying allosteric sites that inhibit the ATPase and substrate binding activities using computational approaches. Using E. coli as a model organism, molecular docking for high throughput virtual screening was carried out using 623 compounds from the South African Natural Compounds Database (SANCDB; https://sancdb.rubi.ru.ac.za/) against identified allosteric sites. Ligands with the highest binding affinity (good binders) interacting with critical allosteric residues that are druggable were identified. Molecular dynamics (MD) simulation was also performed on the identified hits to assess for protein-inhibitor complex stability. Finally, principal component analysis (PCA) was performed to understand the structural dynamics of the ligand-free and ligand-bound structures during MD simulation.
- Full Text:
- Date Issued: 2019
Assessment of antibacterial potentials of Garcinia Kola seed extracts and their interactions with antibiotics
- Authors: Sibanda, Thulani
- Date: 2007
- Subjects: Drug resistance in microorganisms , Garcinia , Antibiotics
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/19236 , vital:43038
- Description: The antibacterial potency of the extracts of the seed of Garcinia kola (bitter kola) was investigated in this study against a panel of referenced, environmental and clinical bacterial strains. The killing rates of the active extract as well as their potential for combination antibacterial therapy with standard antibiotics were also elucidated using standard procedures. The aqueous and acetone extracts of the seed were screened for activity against 27 bacterial isolates. The aqueous extract exhibited activity mainly against Gram positive organisms with Minimum inhibitory concentration (MIC) values ranging from 5 mgml-1 – 20 mgml-1, while the acetone extract showed activity against both Gram negative and Gram positive organisms with MIC values ranging from 10 mgml-1 - 0.156 mgml-1. The acetone extract also showed rapid bactericidal activity against Staphylococcus aureus ATCC 6538 with a 3.097 Log10 reduction in counts within 4 hours at 0.3125 mgml-1 and a 1.582 Log10 reduction against Proteus vulgaris CSIR 0030 at 5 mgml-1 after 1 hour. In addition, the aqueous, methanol and acetone extracts of the seeds also exhibited activity against four clinical strains of Staphylococcus isolated from wound sepsis specimens. The MIC values for the aqueous extract were 10 mgml-1 for all the isolates while the acetone and methanol extracts had lower values ranging from 0.3125 - 0.625 mgml-1. The acetone extract was strongly bactericidal against Staphylococcus aureus OKOH3 resulting in a 2.70 Log10 reduction in counts at 1.25 mgml-1 within 4 hours of exposure and a complete elimination of the organism after 8 hours. The bactericidal activity of the same extract against Staphylococcus aureus OKOH1 was weak, achieving only a 2.92 Log10 reduction in counts at 1.25 mgml-1 (4× MIC) in 24 hours. In the test for interactions between the acetone extract of the seeds and antibiotics, synergistic interactions were observed largely against Gram positive organisms using the FIC indices, (indices of 0.52 - 0.875) with combinations against Gram negatives yielding largely antagonistic interactions (indices of 2.0 to 5.0). Synergy (≥ 1000 times or ≥ 3 Log10 potentiation of the bactericidal activity) against both Gram negative and Gram positive organisms was detected by time kill assays mainly involving the antibiotics tetracycline, chloramphenicol, amoxycillin and penicillin G. Combinations involving erythromycin and ciprofloxacin consistently gave antagonistic or indifferent interactions. We conclude that the acetone extract of Garcinia kola seeds possess strong bactericidal activities against both Gram positive and Gram negative organisms and can be therapeutically useful in the treatment of bacterial infections including the problematic staphylococcal wound infections. In addition, the acetone extract can be a potential source of broad spectrum resistance modifying compounds that can potentially improve the performance of antibiotics in the treatment of drug resistant infections. , Thesis (MSc)-- Microbiology, University of Fort Hare, 2007
- Full Text:
- Date Issued: 2007
- Authors: Sibanda, Thulani
- Date: 2007
- Subjects: Drug resistance in microorganisms , Garcinia , Antibiotics
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/19236 , vital:43038
- Description: The antibacterial potency of the extracts of the seed of Garcinia kola (bitter kola) was investigated in this study against a panel of referenced, environmental and clinical bacterial strains. The killing rates of the active extract as well as their potential for combination antibacterial therapy with standard antibiotics were also elucidated using standard procedures. The aqueous and acetone extracts of the seed were screened for activity against 27 bacterial isolates. The aqueous extract exhibited activity mainly against Gram positive organisms with Minimum inhibitory concentration (MIC) values ranging from 5 mgml-1 – 20 mgml-1, while the acetone extract showed activity against both Gram negative and Gram positive organisms with MIC values ranging from 10 mgml-1 - 0.156 mgml-1. The acetone extract also showed rapid bactericidal activity against Staphylococcus aureus ATCC 6538 with a 3.097 Log10 reduction in counts within 4 hours at 0.3125 mgml-1 and a 1.582 Log10 reduction against Proteus vulgaris CSIR 0030 at 5 mgml-1 after 1 hour. In addition, the aqueous, methanol and acetone extracts of the seeds also exhibited activity against four clinical strains of Staphylococcus isolated from wound sepsis specimens. The MIC values for the aqueous extract were 10 mgml-1 for all the isolates while the acetone and methanol extracts had lower values ranging from 0.3125 - 0.625 mgml-1. The acetone extract was strongly bactericidal against Staphylococcus aureus OKOH3 resulting in a 2.70 Log10 reduction in counts at 1.25 mgml-1 within 4 hours of exposure and a complete elimination of the organism after 8 hours. The bactericidal activity of the same extract against Staphylococcus aureus OKOH1 was weak, achieving only a 2.92 Log10 reduction in counts at 1.25 mgml-1 (4× MIC) in 24 hours. In the test for interactions between the acetone extract of the seeds and antibiotics, synergistic interactions were observed largely against Gram positive organisms using the FIC indices, (indices of 0.52 - 0.875) with combinations against Gram negatives yielding largely antagonistic interactions (indices of 2.0 to 5.0). Synergy (≥ 1000 times or ≥ 3 Log10 potentiation of the bactericidal activity) against both Gram negative and Gram positive organisms was detected by time kill assays mainly involving the antibiotics tetracycline, chloramphenicol, amoxycillin and penicillin G. Combinations involving erythromycin and ciprofloxacin consistently gave antagonistic or indifferent interactions. We conclude that the acetone extract of Garcinia kola seeds possess strong bactericidal activities against both Gram positive and Gram negative organisms and can be therapeutically useful in the treatment of bacterial infections including the problematic staphylococcal wound infections. In addition, the acetone extract can be a potential source of broad spectrum resistance modifying compounds that can potentially improve the performance of antibiotics in the treatment of drug resistant infections. , Thesis (MSc)-- Microbiology, University of Fort Hare, 2007
- Full Text:
- Date Issued: 2007
- «
- ‹
- 1
- ›
- »