The effects of intermittent task parameters on muscle fatigue development during submaximal dynamic exertions
- Authors: King, Josephine Claire
- Date: 2018
- Subjects: Muscles -- Physiology , Muscles -- Wounds and injuries , Fatigue , Human engineering , Occupational diseases
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63855 , vital:28498
- Description: The negative effects of localised muscle fatigue on accidents, injuries and poor work performance are well known, as is the realisation that modifying task characteristics can minimise fatigue development. A large amount of literature has investigated the effects of task-dependent factors on localised muscle fatigue, most studies have focussed on prolonged or intermittent static (isometric) exertions. Few studies have investigated muscle fatigue development during more complex tasks, namely those which resemble common work activities and which tend to be intermittent and dynamic in nature. More specifically, the interactions between the main intermittent parameters - duty cycle, force level, and cycle time - during dynamic exertions are poorly understood. The purpose of this study was to investigate the effects of cycle time and combinations of duty cycles and force levels on the development of muscle fatigue during submaximal dynamic exertions while the overall mean muscle load was kept constant. A two-factorial repeated-measures experiment was developed for this study. Nine experimental conditions, each lasting 16 minutes, aimed at inducing muscle fatigue in the middle deltoid muscle via intermittent dynamic shoulder abduction and adduction motions at three cycle times (30, 60, and 120 seconds) and three combinations of duty cycles and force levels. The percentage of muscle activation during one cycle (i.e. the duty cycle) varied depending on the exertion intensity (force level) so that the overall mean muscle load remained consistent throughout all experimental conditions, namely at 20% of maximum force exertion. As a result, the three duty cycle/force level combinations were: 0.8/25% of maximum voluntary force (MVF), 0.5/40%MVF, and 0.4/50%MVF. Muscle fatigue development was inferred by changes in peak torque, total work, average power, local Ratings of Perceived Exertion (RPE), and surface electromyographical (EMG) activity (time domain and frequency domain).Two-factorial analyses of variance with Tukey post-hoc tests were used to identify significant condition effects at p<0.05. All dependent measures showed that muscle fatigue was induced by the 16-minute fatigue protocol. Peak torque, total work, average power, and EMG percentage of maximum showed that cycle time and the duty cycle/force level combination had no effect on the development of muscle fatigue, whereas the measures evaluated during the 16-minute fatigue protocol did. The cycle time of 120 seconds induced the greatest change in six of the eight variables, while the duty cycle/force level combination (0.8/25%) also resulted in the greatest effect in six of the measures. Fatigue was also found to be dependent on the interaction of cycle time and duty cycle/force level combination. The conclusion draws from this study is that shorter cycles and activities with short activation periods, and proportionally longer rest breaks result in the lowest fatigue developments.
- Full Text:
- Date Issued: 2018
- Authors: King, Josephine Claire
- Date: 2018
- Subjects: Muscles -- Physiology , Muscles -- Wounds and injuries , Fatigue , Human engineering , Occupational diseases
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63855 , vital:28498
- Description: The negative effects of localised muscle fatigue on accidents, injuries and poor work performance are well known, as is the realisation that modifying task characteristics can minimise fatigue development. A large amount of literature has investigated the effects of task-dependent factors on localised muscle fatigue, most studies have focussed on prolonged or intermittent static (isometric) exertions. Few studies have investigated muscle fatigue development during more complex tasks, namely those which resemble common work activities and which tend to be intermittent and dynamic in nature. More specifically, the interactions between the main intermittent parameters - duty cycle, force level, and cycle time - during dynamic exertions are poorly understood. The purpose of this study was to investigate the effects of cycle time and combinations of duty cycles and force levels on the development of muscle fatigue during submaximal dynamic exertions while the overall mean muscle load was kept constant. A two-factorial repeated-measures experiment was developed for this study. Nine experimental conditions, each lasting 16 minutes, aimed at inducing muscle fatigue in the middle deltoid muscle via intermittent dynamic shoulder abduction and adduction motions at three cycle times (30, 60, and 120 seconds) and three combinations of duty cycles and force levels. The percentage of muscle activation during one cycle (i.e. the duty cycle) varied depending on the exertion intensity (force level) so that the overall mean muscle load remained consistent throughout all experimental conditions, namely at 20% of maximum force exertion. As a result, the three duty cycle/force level combinations were: 0.8/25% of maximum voluntary force (MVF), 0.5/40%MVF, and 0.4/50%MVF. Muscle fatigue development was inferred by changes in peak torque, total work, average power, local Ratings of Perceived Exertion (RPE), and surface electromyographical (EMG) activity (time domain and frequency domain).Two-factorial analyses of variance with Tukey post-hoc tests were used to identify significant condition effects at p<0.05. All dependent measures showed that muscle fatigue was induced by the 16-minute fatigue protocol. Peak torque, total work, average power, and EMG percentage of maximum showed that cycle time and the duty cycle/force level combination had no effect on the development of muscle fatigue, whereas the measures evaluated during the 16-minute fatigue protocol did. The cycle time of 120 seconds induced the greatest change in six of the eight variables, while the duty cycle/force level combination (0.8/25%) also resulted in the greatest effect in six of the measures. Fatigue was also found to be dependent on the interaction of cycle time and duty cycle/force level combination. The conclusion draws from this study is that shorter cycles and activities with short activation periods, and proportionally longer rest breaks result in the lowest fatigue developments.
- Full Text:
- Date Issued: 2018
Compensating employees who suffer work-related psychiatric harm in the course and scope of their employment
- Authors: Du Plessis, Meryl Candice
- Date: 2008
- Subjects: Workers' compensation -- Law and legislation , Liability for emotional distress , Post-traumatic stress disorder , Occupational diseases
- Language: English
- Type: Thesis , Masters , LLM
- Identifier: vital:3671 , http://hdl.handle.net/10962/d1003186 , Workers' compensation -- Law and legislation , Liability for emotional distress , Post-traumatic stress disorder , Occupational diseases
- Description: This study aims to ascertain the legal redress available to employees who suffer psychological harm as a result of workplace stress. On a general level, it identifies and assesses some of the available policy options, particularly as they relate to the interaction of statutory workers’ compensation schemes and the common law. On a more specific level, it examines and analyses various issues: the nature and extent of compensable psychiatric harm; the legal duty on employers to protect employees’ health and well being; the role of negligence; requirements specific to the Compensation for Occupational Injuries and Diseases Act 130 of 1993 (COIDA); and the causal nexus necessary to sustain a claim. The conclusion is reached that employees should utilise the workers’ compensation system as the primary vehicle to obtain redress if they suffer from occupational psychiatric harm. However, due to the law’s generally conservative approach to psychiatric harm and intimations that the Department of Labour intends setting strict requirements for claims for psychiatric harm in terms of COIDA, the common law of delict might continue to play an important role in claims for occupational psychiatric harm. The writer recommends that a hybrid system for compensation for stress-related psychiatric harm suffered in the course and scope of employment be adopted, with the statutory compensation scheme providing relatively limited benefits and the common law providing general damages if the claimant can prove negligence on the part of the employer; that the requirement of a recognised psychiatric illness be maintained for both statutory compensation and compensation in terms of the common law; that all parties’ interests are carefully balanced in delineating the employer’s legal duty to employers and that undue weight not be accorded to the terms of the contract of employment; that more attention be paid to factual causation and the development of lternatives/complements to the traditional conditio sine qua non test; that the validity of the circular instruction on post-traumatic stress disorder (PTSD) be tested on administrative-law grounds; and that the stringent prescription requirements set by the circular instruction on PTSD be reviewed.
- Full Text:
- Date Issued: 2008
- Authors: Du Plessis, Meryl Candice
- Date: 2008
- Subjects: Workers' compensation -- Law and legislation , Liability for emotional distress , Post-traumatic stress disorder , Occupational diseases
- Language: English
- Type: Thesis , Masters , LLM
- Identifier: vital:3671 , http://hdl.handle.net/10962/d1003186 , Workers' compensation -- Law and legislation , Liability for emotional distress , Post-traumatic stress disorder , Occupational diseases
- Description: This study aims to ascertain the legal redress available to employees who suffer psychological harm as a result of workplace stress. On a general level, it identifies and assesses some of the available policy options, particularly as they relate to the interaction of statutory workers’ compensation schemes and the common law. On a more specific level, it examines and analyses various issues: the nature and extent of compensable psychiatric harm; the legal duty on employers to protect employees’ health and well being; the role of negligence; requirements specific to the Compensation for Occupational Injuries and Diseases Act 130 of 1993 (COIDA); and the causal nexus necessary to sustain a claim. The conclusion is reached that employees should utilise the workers’ compensation system as the primary vehicle to obtain redress if they suffer from occupational psychiatric harm. However, due to the law’s generally conservative approach to psychiatric harm and intimations that the Department of Labour intends setting strict requirements for claims for psychiatric harm in terms of COIDA, the common law of delict might continue to play an important role in claims for occupational psychiatric harm. The writer recommends that a hybrid system for compensation for stress-related psychiatric harm suffered in the course and scope of employment be adopted, with the statutory compensation scheme providing relatively limited benefits and the common law providing general damages if the claimant can prove negligence on the part of the employer; that the requirement of a recognised psychiatric illness be maintained for both statutory compensation and compensation in terms of the common law; that all parties’ interests are carefully balanced in delineating the employer’s legal duty to employers and that undue weight not be accorded to the terms of the contract of employment; that more attention be paid to factual causation and the development of lternatives/complements to the traditional conditio sine qua non test; that the validity of the circular instruction on post-traumatic stress disorder (PTSD) be tested on administrative-law grounds; and that the stringent prescription requirements set by the circular instruction on PTSD be reviewed.
- Full Text:
- Date Issued: 2008
Combined and additive effects of assembly tasks and constrained body postures
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
Laboratory investigation of a simulated industrial task pre- and post-ergonomics intervention
- Authors: Renz, Miriam Christina
- Date: 2004
- Subjects: Human engineering , Musculoskeletal system -- Diseases , Occupational diseases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5162 , http://hdl.handle.net/10962/d1015806
- Description: The focus of the present study was on the investigation of the effects of an intervention strategy on an industrial task in situ and a simulation of the same task within a laboratory setting. The task of offloading crates from a truck at a local business was simulated in a laboratory setting for rigorous analysis. The effect of an ergonomically sound intervention on selected physical, physiological and perceptual variables was evaluated in a test - retest experimental set-up using 28 young, healthy male students. Each of the two experimental conditions lasted for 16 minutes. In the pre-intervention task subjects were required to transfer the crates from one point to another by sliding them along the floor. During the execution of the post-intervention task responses to reductions in the stacking height and modifications of the working method were evaluated. Results obtained for spinal kinematics during the simulated industrial task indicated a high biomechanical risk, due to large ranges of motion, high velocities and accelerations in the sagittal and transverse planes. The heavy workload of the task was also evident in elevated physiological responses (HR, RF, VT, VE, VO2, RQ, EE) and perceptual ratings (RPE, Body Discomfort). Assessment of the intervention strategy revealed that the high risk industrial task was reduced to moderate acceptable, with measurements of spinal kinematics, physiological and perceptual variables being significantly reduced. An in situ re-assessment of the workers responses to the intervention also elicited reductions in heart rates and perceptual ratings compared to the original task.
- Full Text:
- Date Issued: 2004
- Authors: Renz, Miriam Christina
- Date: 2004
- Subjects: Human engineering , Musculoskeletal system -- Diseases , Occupational diseases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5162 , http://hdl.handle.net/10962/d1015806
- Description: The focus of the present study was on the investigation of the effects of an intervention strategy on an industrial task in situ and a simulation of the same task within a laboratory setting. The task of offloading crates from a truck at a local business was simulated in a laboratory setting for rigorous analysis. The effect of an ergonomically sound intervention on selected physical, physiological and perceptual variables was evaluated in a test - retest experimental set-up using 28 young, healthy male students. Each of the two experimental conditions lasted for 16 minutes. In the pre-intervention task subjects were required to transfer the crates from one point to another by sliding them along the floor. During the execution of the post-intervention task responses to reductions in the stacking height and modifications of the working method were evaluated. Results obtained for spinal kinematics during the simulated industrial task indicated a high biomechanical risk, due to large ranges of motion, high velocities and accelerations in the sagittal and transverse planes. The heavy workload of the task was also evident in elevated physiological responses (HR, RF, VT, VE, VO2, RQ, EE) and perceptual ratings (RPE, Body Discomfort). Assessment of the intervention strategy revealed that the high risk industrial task was reduced to moderate acceptable, with measurements of spinal kinematics, physiological and perceptual variables being significantly reduced. An in situ re-assessment of the workers responses to the intervention also elicited reductions in heart rates and perceptual ratings compared to the original task.
- Full Text:
- Date Issued: 2004
- «
- ‹
- 1
- ›
- »