Performance of an integrated algal pond for treatment of domestic sewage: a process audit
- Authors: Dube, Anele
- Date: 2020
- Subjects: Water -- Purification , Sewage -- Purification -- Anaerobic treatment , Algae -- Biotechnology , Waste disposal -- South Africa , Integrated algae pond systems (IAPS)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167043 , vital:41432
- Description: Integrated algae pond systems (IAPS) are energy efficient, robust, passive systems that use the principles of fermentation, photosynthesis and microbial metabolism to remediate wastewater, producing a good quality effluent with reuse potential. In addition to the treatment of wastewater, IAPS have the ability to generate two additional product streams viz. biogas and biomass. The latter adds to the attractiveness of the system. However, the implementation of this technology, like many passive systems, has remained limited at a commercial scale, and the inclination is still towards grey technologies. The aim of this research was to investigate the capabilities and potential of a demonstration-scale IAPS and use results obtained to establish a process audit framework. The aspects considered for the audit included performance efficiency, effluent water quality, biomass composition, quantity and productivity within the ponds, and cost analysis of operation and maintenance over a 9-year period. Plant performance was closely monitored during the course of the study and this led to a review of previously adopted plant management strategies. Troubleshooting exercises were also carried out when plant performance declined. Results showed that IAPS efficiently reduced standard water parameters with the exception of pH, dissolved oxygen, and nitrate whose values increased from raw influent to final effluent. The following water quality parameters were established for the final effluent: total suspended solids 55 ± 7.1 mg. L-1 (n = 28); chemical oxygen demand 94.1 ± 10.6 mg. L-1 (n = 28) (after removal of algae); pH 9.9 ± 0.01 (n = 26); ammonium nitrogen 1.7 ± 0.3 mg. L-1 (n = 25); nitrate 3.3 ± 0.6 mg. L-1 (n = 25); ortho-phosphate 1.6 ± 0.2 mg. L-1 (n = 25); electrical conductivity 98.7 ± 2.0 mS m-1 (n = 26) and faecal coliforms (per 100 mL) 1482.6 ± 636.0 (n = 24). The final effluent measured consistently high chemical oxygen demand and total suspended solids, however close analysis showed that total suspended solids could be controlled by increasing the frequency of removal of settled biomass within the settling ponds. Biomass produced contained microalgae, bacteria, metazoa, and protozoa. The biomass productivity achieved was as high as 130.6 kg ha-1 d-1; however, about 33% was lost to the final effluent due to inadequate settling. Results obtained during the course of this study and outcomes of earlier work on IAPS are taken as the baseline to determine parameters needed for the development of the process audit framework. Techniques utilised to derive the blue print process audit protocol for IAPS included a turtle diagram, a flow diagram and a checklist. Attention to plant management proved vital in determining overall performance. Cost, including operating and maintenance, of treating water using the demonstration scale system on a per person equivalent per year basis was determined as ZAR 123.87 (where, ZAR to USD = 0.07).
- Full Text:
- Date Issued: 2020
- Authors: Dube, Anele
- Date: 2020
- Subjects: Water -- Purification , Sewage -- Purification -- Anaerobic treatment , Algae -- Biotechnology , Waste disposal -- South Africa , Integrated algae pond systems (IAPS)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167043 , vital:41432
- Description: Integrated algae pond systems (IAPS) are energy efficient, robust, passive systems that use the principles of fermentation, photosynthesis and microbial metabolism to remediate wastewater, producing a good quality effluent with reuse potential. In addition to the treatment of wastewater, IAPS have the ability to generate two additional product streams viz. biogas and biomass. The latter adds to the attractiveness of the system. However, the implementation of this technology, like many passive systems, has remained limited at a commercial scale, and the inclination is still towards grey technologies. The aim of this research was to investigate the capabilities and potential of a demonstration-scale IAPS and use results obtained to establish a process audit framework. The aspects considered for the audit included performance efficiency, effluent water quality, biomass composition, quantity and productivity within the ponds, and cost analysis of operation and maintenance over a 9-year period. Plant performance was closely monitored during the course of the study and this led to a review of previously adopted plant management strategies. Troubleshooting exercises were also carried out when plant performance declined. Results showed that IAPS efficiently reduced standard water parameters with the exception of pH, dissolved oxygen, and nitrate whose values increased from raw influent to final effluent. The following water quality parameters were established for the final effluent: total suspended solids 55 ± 7.1 mg. L-1 (n = 28); chemical oxygen demand 94.1 ± 10.6 mg. L-1 (n = 28) (after removal of algae); pH 9.9 ± 0.01 (n = 26); ammonium nitrogen 1.7 ± 0.3 mg. L-1 (n = 25); nitrate 3.3 ± 0.6 mg. L-1 (n = 25); ortho-phosphate 1.6 ± 0.2 mg. L-1 (n = 25); electrical conductivity 98.7 ± 2.0 mS m-1 (n = 26) and faecal coliforms (per 100 mL) 1482.6 ± 636.0 (n = 24). The final effluent measured consistently high chemical oxygen demand and total suspended solids, however close analysis showed that total suspended solids could be controlled by increasing the frequency of removal of settled biomass within the settling ponds. Biomass produced contained microalgae, bacteria, metazoa, and protozoa. The biomass productivity achieved was as high as 130.6 kg ha-1 d-1; however, about 33% was lost to the final effluent due to inadequate settling. Results obtained during the course of this study and outcomes of earlier work on IAPS are taken as the baseline to determine parameters needed for the development of the process audit framework. Techniques utilised to derive the blue print process audit protocol for IAPS included a turtle diagram, a flow diagram and a checklist. Attention to plant management proved vital in determining overall performance. Cost, including operating and maintenance, of treating water using the demonstration scale system on a per person equivalent per year basis was determined as ZAR 123.87 (where, ZAR to USD = 0.07).
- Full Text:
- Date Issued: 2020
Water quality, biomass and extracellular polymeric substances in an integrated algae pond system
- Authors: Jimoh, Taobat Adekilekun
- Date: 2018
- Subjects: Water -- Purification , Sewage -- Purification -- Anaerobic treatment , Sewage lagoons , Sewage disposal plants , ASPAM model (Acid mine drainage) , Integrated algae pond systems (IAPS)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/57307 , vital:26871
- Description: Integrated algae pond systems (IAPS) combine the use of anaerobic and aerobic bioprocesses to effect wastewater treatment. Although, IAPS as a technology process offers many advantages including efficient and simultaneous N and P removal, no requirement for additional chemicals, O2 generation, CO2 mitigation, and a biomass with potential for valorization, a lack of technological advancement and the need for large land area, has limited the reach of this technology at industrial scale. In mitigation, peroxonation was introduced as a tertiary treatment unit and its effect on COD and TSS of IAPS treated water investigated. An effort was made to characterize the soluble but persistent COD in IAPS treated water and, productivity of the HRAOP mixed liquor was investigated to gain insight into the potential use of this biomass. Results show that peroxone treatment effectively reduced COD, TSS, and nutrient load of IAPS water without any significant impact on land area requirement. Indeed, summary data describing the effect of peroxone on quality of IAPS-treated water confirmed that it complies with the general limit values for either irrigation or discharge into a water resource that is not a listed water resource for volumes up to 2 ML of treated wastewater on any given day. Extraction followed by FT-IR spectroscopy was used to confirm albeit tentatively, the identity of the soluble but persistent COD in IAPS treated water as MaB-floc EPS. Results show that MaB-flocs from HRAOPs are assemblages of microorganisms produced as discrete aggregates as a result of microbial EPS production. A relationship between photosynthesis and EPS production was established by quantification of the EPS following exposure of MaB-flocs to either continuous light or darkness. Several novel strains of bacteria were isolated from HRAOP mixed liquor and 16S ribosomal genomic sequence analysis resulted in the molecular characterization of Planococcus maitriensis strain ECCN 45b. This is the first report of Planococcus maitriensis from a wastewater treatment process. Productivity and change in MaB-flocs concentration, measured as mixed liquor suspended solids (MLSS) between morning and evening were monitored and revealed that MLSS is composed of microalgae and bacteria but not fungi. Concentration varied from 77 mg L-1 in September (winter) to 285 mg L-1 in November (spring); pond productivity increased from 5.8 g m-2 d-1 (winter) to 21.5 g m-2 d-1 (spring); and, irrespective of MLSS concentration in late afternoon, approximately 39% was lost overnight, which presumably occurred due to passive removal by the algae settling pond. The outcomes of this research are discussed in terms of the quality of treated water, and the further development of IAPS as a platform technology for establishing a biorefinery within the wastewater treatment sector.
- Full Text:
- Date Issued: 2018
- Authors: Jimoh, Taobat Adekilekun
- Date: 2018
- Subjects: Water -- Purification , Sewage -- Purification -- Anaerobic treatment , Sewage lagoons , Sewage disposal plants , ASPAM model (Acid mine drainage) , Integrated algae pond systems (IAPS)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/57307 , vital:26871
- Description: Integrated algae pond systems (IAPS) combine the use of anaerobic and aerobic bioprocesses to effect wastewater treatment. Although, IAPS as a technology process offers many advantages including efficient and simultaneous N and P removal, no requirement for additional chemicals, O2 generation, CO2 mitigation, and a biomass with potential for valorization, a lack of technological advancement and the need for large land area, has limited the reach of this technology at industrial scale. In mitigation, peroxonation was introduced as a tertiary treatment unit and its effect on COD and TSS of IAPS treated water investigated. An effort was made to characterize the soluble but persistent COD in IAPS treated water and, productivity of the HRAOP mixed liquor was investigated to gain insight into the potential use of this biomass. Results show that peroxone treatment effectively reduced COD, TSS, and nutrient load of IAPS water without any significant impact on land area requirement. Indeed, summary data describing the effect of peroxone on quality of IAPS-treated water confirmed that it complies with the general limit values for either irrigation or discharge into a water resource that is not a listed water resource for volumes up to 2 ML of treated wastewater on any given day. Extraction followed by FT-IR spectroscopy was used to confirm albeit tentatively, the identity of the soluble but persistent COD in IAPS treated water as MaB-floc EPS. Results show that MaB-flocs from HRAOPs are assemblages of microorganisms produced as discrete aggregates as a result of microbial EPS production. A relationship between photosynthesis and EPS production was established by quantification of the EPS following exposure of MaB-flocs to either continuous light or darkness. Several novel strains of bacteria were isolated from HRAOP mixed liquor and 16S ribosomal genomic sequence analysis resulted in the molecular characterization of Planococcus maitriensis strain ECCN 45b. This is the first report of Planococcus maitriensis from a wastewater treatment process. Productivity and change in MaB-flocs concentration, measured as mixed liquor suspended solids (MLSS) between morning and evening were monitored and revealed that MLSS is composed of microalgae and bacteria but not fungi. Concentration varied from 77 mg L-1 in September (winter) to 285 mg L-1 in November (spring); pond productivity increased from 5.8 g m-2 d-1 (winter) to 21.5 g m-2 d-1 (spring); and, irrespective of MLSS concentration in late afternoon, approximately 39% was lost overnight, which presumably occurred due to passive removal by the algae settling pond. The outcomes of this research are discussed in terms of the quality of treated water, and the further development of IAPS as a platform technology for establishing a biorefinery within the wastewater treatment sector.
- Full Text:
- Date Issued: 2018
Post-treatment technologies for integrated algal pond systems
- Authors: Westensee, Dirk Karl
- Date: 2015
- Subjects: Sewage disposal plants -- South Africa -- Grahamstown , Water -- Purification -- Filtration , Water -- Purification -- Slow sand filtration , Sewage -- Purification -- Anaerobic treatment , Sewage -- Purification -- Biological treatment , Algae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5958 , http://hdl.handle.net/10962/d1018180
- Description: Integrated Algae Pond Systems (IAPS) are a derivation of the Oswald designed Algal Integrated Wastewater Pond Systems (AIWPS®) and combine the use of anaerobic and aerobic bioprocesses to effect wastewater treatment. IAPS technology was introduced to South Africa in 1996 and a pilot plant designed and commissioned at the Belmont Valley WWTW in Grahamstown. The system has been in continual use since implementation and affords a secondarily treated water for reclamation according to its design specifications which most closely resemble those of the AIWPS® Advanced Secondary Process developed by Oswald. As a consequence, and as might be expected, while the technology performed well and delivered a final effluent superior to most pond systems deployed in South Africa it was unable to meet The Department of Water Affairs General Standard for nutrient removal and effluent discharge. The work described in this thesis involved the design, construction, and evaluation of several tertiary treatment units (TTU') for incorporation into the IAPS process design. Included were; Maturation Ponds (MP), Slow Sand Filter (SSF) and Rock Filters (RF). Three MP's were constructed in series with a 12 day retention time and operated in parallel with a two-layered SSF and a three-stage RF. Water quality of the effluent emerging from each of these TTU's was monitored over a 10 month period. Significant decreases in the chemical oxygen demand (COD), ammonium-N, phosphate-P, nitrate-N, faecal coliforms (FC) and total coliforms (TC) were achieved by these TTU's. On average, throughout the testing period, water quality was within the statutory limit for discharge to a water course that is not a listed water course, with the exception of the total suspended solids (TSS). The RF was determined as the most suitable TTU for commercial use due to production of a better quality water, smaller footprint, lower construction costs and less maintenance required. From the results of this investigation it is concluded that commercial deployment of IAPS for the treatment of municipal sewage requires the inclusion of a suitable TTU. Furthermore, and based on the findings presented, RF appears most appropriate to ensure that quality of the final effluent meets the standard for discharge.
- Full Text:
- Date Issued: 2015
- Authors: Westensee, Dirk Karl
- Date: 2015
- Subjects: Sewage disposal plants -- South Africa -- Grahamstown , Water -- Purification -- Filtration , Water -- Purification -- Slow sand filtration , Sewage -- Purification -- Anaerobic treatment , Sewage -- Purification -- Biological treatment , Algae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5958 , http://hdl.handle.net/10962/d1018180
- Description: Integrated Algae Pond Systems (IAPS) are a derivation of the Oswald designed Algal Integrated Wastewater Pond Systems (AIWPS®) and combine the use of anaerobic and aerobic bioprocesses to effect wastewater treatment. IAPS technology was introduced to South Africa in 1996 and a pilot plant designed and commissioned at the Belmont Valley WWTW in Grahamstown. The system has been in continual use since implementation and affords a secondarily treated water for reclamation according to its design specifications which most closely resemble those of the AIWPS® Advanced Secondary Process developed by Oswald. As a consequence, and as might be expected, while the technology performed well and delivered a final effluent superior to most pond systems deployed in South Africa it was unable to meet The Department of Water Affairs General Standard for nutrient removal and effluent discharge. The work described in this thesis involved the design, construction, and evaluation of several tertiary treatment units (TTU') for incorporation into the IAPS process design. Included were; Maturation Ponds (MP), Slow Sand Filter (SSF) and Rock Filters (RF). Three MP's were constructed in series with a 12 day retention time and operated in parallel with a two-layered SSF and a three-stage RF. Water quality of the effluent emerging from each of these TTU's was monitored over a 10 month period. Significant decreases in the chemical oxygen demand (COD), ammonium-N, phosphate-P, nitrate-N, faecal coliforms (FC) and total coliforms (TC) were achieved by these TTU's. On average, throughout the testing period, water quality was within the statutory limit for discharge to a water course that is not a listed water course, with the exception of the total suspended solids (TSS). The RF was determined as the most suitable TTU for commercial use due to production of a better quality water, smaller footprint, lower construction costs and less maintenance required. From the results of this investigation it is concluded that commercial deployment of IAPS for the treatment of municipal sewage requires the inclusion of a suitable TTU. Furthermore, and based on the findings presented, RF appears most appropriate to ensure that quality of the final effluent meets the standard for discharge.
- Full Text:
- Date Issued: 2015
Exploring the fertiliser potential of biosolids from algae integrated wastewater treatment systems
- Authors: Mlambo, Patricia Zanele
- Date: 2014
- Subjects: Sewage disposal plants , Sewage sludge as fertilizer , Algae -- Biotechnology , Sewage -- Purification -- Anaerobic treatment , Plant regulators , Biofertilizers , Microalgae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5957 , http://hdl.handle.net/10962/d1013342
- Description: High rate algae oxidation ponds (HRAOP) for domestic wastewater treatment generate biosolids that are predominantly microalgae. Consequently, HRAOP biosolids are enriched with minerals, amino acids, nutrients and possibly contain plant growth regulator (PGR)-like substances, which makes HRAOP biosolids attractive as fertiliser or PGR. This study investigated HRAOP biosolids as a starting material for a natural, cost-effective and readily-available eco-friendly organic fertiliser and/or PGRs. Various HRAOP extract formulations were prepared and their effect on plant growth and development was evaluated using selected bioassays. Initial screening included assessing the effect on change in specific leaf area, radish cotyledon expansion as an indicator of PGR-like activity, and seed germination index (GI). More detailed studies on fertiliser efficacy and PGR-like activity utilised bean (Phaseolus vulgaris) and tomato (Solanum lycopersicum) plants. Combined effects of sonicated (S) and 40% v/v methanol (M) extract (5:1 SM) had impressive plant responses, comparable to Hoagland solution (HS). Other potentially fertiliser formulations included 0.5% M, 1% M, 2.5% S and 5% S formulations. The 5:1 SM and 5% S showed greater PGR-like activity, promoting cotyledon expansion by 459 ± 0.02% and 362 ± 0.01%, respectively. GI data showed that none of the formulations negatively impacted germination. Further investigation showed that the 5% S formulation increased leaf length, width and area by 6.69 ± 0.24, 6.21 ± 0.2 mm and 41.55 ± 0.2 mm². All formulated fertiliser extracts had no adverse effect on chlorophyll content and plant nutrient balance as indicated by C:N (8-10:1) ratio. In addition, plants appeared to actively mobilise nutrients to regions where needed as evidenced by a shift in shoot: root ratio depending on C, N and water availability. Furthermore, 5% S caused a 75% increase in tomato productivity and had no effect on bean productivity. Whereas, 5:1 SM and 1% M formulation improved bean pod production by 33.3% and 11%, respectively but did not affect tomato production. Harvest index (HI) however indicated a 3% reduction in tomato productivity with 5:1 SM and little or no enhancement in bean productivity with both 5:1 SM and 5% S treatments. Bean plants treated with 5:1 SM and 5% S produced larger fruits, which could be an indication of the presence of a PGR effect. Overall, HRAOP biosolids extracts prepared and investigated in this study demonstrated both fertiliser characteristics and PGR-like activity with performances comparable and in some cases exceeding that of commercial products. However additional research is needed to confirm presence of PGR-like activities and fertiliser efficacy.
- Full Text:
- Date Issued: 2014
- Authors: Mlambo, Patricia Zanele
- Date: 2014
- Subjects: Sewage disposal plants , Sewage sludge as fertilizer , Algae -- Biotechnology , Sewage -- Purification -- Anaerobic treatment , Plant regulators , Biofertilizers , Microalgae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5957 , http://hdl.handle.net/10962/d1013342
- Description: High rate algae oxidation ponds (HRAOP) for domestic wastewater treatment generate biosolids that are predominantly microalgae. Consequently, HRAOP biosolids are enriched with minerals, amino acids, nutrients and possibly contain plant growth regulator (PGR)-like substances, which makes HRAOP biosolids attractive as fertiliser or PGR. This study investigated HRAOP biosolids as a starting material for a natural, cost-effective and readily-available eco-friendly organic fertiliser and/or PGRs. Various HRAOP extract formulations were prepared and their effect on plant growth and development was evaluated using selected bioassays. Initial screening included assessing the effect on change in specific leaf area, radish cotyledon expansion as an indicator of PGR-like activity, and seed germination index (GI). More detailed studies on fertiliser efficacy and PGR-like activity utilised bean (Phaseolus vulgaris) and tomato (Solanum lycopersicum) plants. Combined effects of sonicated (S) and 40% v/v methanol (M) extract (5:1 SM) had impressive plant responses, comparable to Hoagland solution (HS). Other potentially fertiliser formulations included 0.5% M, 1% M, 2.5% S and 5% S formulations. The 5:1 SM and 5% S showed greater PGR-like activity, promoting cotyledon expansion by 459 ± 0.02% and 362 ± 0.01%, respectively. GI data showed that none of the formulations negatively impacted germination. Further investigation showed that the 5% S formulation increased leaf length, width and area by 6.69 ± 0.24, 6.21 ± 0.2 mm and 41.55 ± 0.2 mm². All formulated fertiliser extracts had no adverse effect on chlorophyll content and plant nutrient balance as indicated by C:N (8-10:1) ratio. In addition, plants appeared to actively mobilise nutrients to regions where needed as evidenced by a shift in shoot: root ratio depending on C, N and water availability. Furthermore, 5% S caused a 75% increase in tomato productivity and had no effect on bean productivity. Whereas, 5:1 SM and 1% M formulation improved bean pod production by 33.3% and 11%, respectively but did not affect tomato production. Harvest index (HI) however indicated a 3% reduction in tomato productivity with 5:1 SM and little or no enhancement in bean productivity with both 5:1 SM and 5% S treatments. Bean plants treated with 5:1 SM and 5% S produced larger fruits, which could be an indication of the presence of a PGR effect. Overall, HRAOP biosolids extracts prepared and investigated in this study demonstrated both fertiliser characteristics and PGR-like activity with performances comparable and in some cases exceeding that of commercial products. However additional research is needed to confirm presence of PGR-like activities and fertiliser efficacy.
- Full Text:
- Date Issued: 2014
Tertiary treatment in integrated algal ponding systems
- Authors: Wells, Charles Digby
- Date: 2005
- Subjects: Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4068 , http://hdl.handle.net/10962/d1006162 , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Description: Inadequate sanitation is one of the leading causes of water pollution and consequently illness in many underdeveloped countries, including South Africa and, specifically, the Eastern Cape Province, where cholera has become endemic. As modern wastewater treatment processes are often energy intensive and expensive, they are not suitable for use in these areas. There is thus a need to develop more sustainable wastewater treatment technologies for application in smaller communities. The integrated algal ponding system (IAPS) was identified as a possible solution to this wastewater management problem and was investigated for adaptation to local conditions, at the Rhodes University Environmental Experimental Field Station in Grahamstown, South Africa. The system was monitored over a period of nine years, with various configuration adjustments of the high rate algal pond (HRAP) unit operation investigated. Under standard operating conditions, the system was able to achieve levels of nutrient and organic removal comparable with conventional wastewater treatment works. The mean nitrate level achieved in the effluent was below the 15mg.l-1 South African discharge standard, however, nitrate removal in the IAPS was found to be inconsistent. Although the system was unable to sustain chemical oxygen demand (COD) removal to below the 75mg.l-1 South African discharge standard, a removal rate of 87% was recorded, with the residual COD remaining in the form of algal biomass. Previous studies in the Eastern Cape Province have shown that few small wastewater treatment works produce effluent that meets the microbial count specification. Therefore, in addition to the collation of IAPS data from the entire nine year monitoring period, this study also investigated the use of the HRAP as an independent unit operation for disinfection of effluent from small sewage plants. It was demonstrated that the independent high rate algal pond (IHRAP) as a free standing unit operation could consistently produce water with Escherichia coli counts of 0cfu.100ml-1. The observed effect was related to a number of possible conditions prevailing in the system, including elevated pH, sunlight and dissolved oxygen. It was also found that the IHRAP greatly enhanced the nutrient removal capabilities of the conventional IAPS, making it possible to reliably and consistently maintain phosphate and ammonium levels in the final effluent to below 5mg.l-1 and 2mg.l-1 respectively (South African discharge standards are 10mg.l-1 and 3mg.l-1 in each case). The quality of the final effluent produced by the optimisation of the IAPS would allow it to be used for irrigation, thereby providing an alternative water source in water stressed areas. The system also proved to be exceptionally robust and data collected during periods of intensive and low management regimes were broadly comparable. Results of the 9 year study have demonstrated reliable performance of the IAPS and its use an appropriate, sustainable wastewater treatment option for small communities.
- Full Text:
- Date Issued: 2005
- Authors: Wells, Charles Digby
- Date: 2005
- Subjects: Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4068 , http://hdl.handle.net/10962/d1006162 , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Description: Inadequate sanitation is one of the leading causes of water pollution and consequently illness in many underdeveloped countries, including South Africa and, specifically, the Eastern Cape Province, where cholera has become endemic. As modern wastewater treatment processes are often energy intensive and expensive, they are not suitable for use in these areas. There is thus a need to develop more sustainable wastewater treatment technologies for application in smaller communities. The integrated algal ponding system (IAPS) was identified as a possible solution to this wastewater management problem and was investigated for adaptation to local conditions, at the Rhodes University Environmental Experimental Field Station in Grahamstown, South Africa. The system was monitored over a period of nine years, with various configuration adjustments of the high rate algal pond (HRAP) unit operation investigated. Under standard operating conditions, the system was able to achieve levels of nutrient and organic removal comparable with conventional wastewater treatment works. The mean nitrate level achieved in the effluent was below the 15mg.l-1 South African discharge standard, however, nitrate removal in the IAPS was found to be inconsistent. Although the system was unable to sustain chemical oxygen demand (COD) removal to below the 75mg.l-1 South African discharge standard, a removal rate of 87% was recorded, with the residual COD remaining in the form of algal biomass. Previous studies in the Eastern Cape Province have shown that few small wastewater treatment works produce effluent that meets the microbial count specification. Therefore, in addition to the collation of IAPS data from the entire nine year monitoring period, this study also investigated the use of the HRAP as an independent unit operation for disinfection of effluent from small sewage plants. It was demonstrated that the independent high rate algal pond (IHRAP) as a free standing unit operation could consistently produce water with Escherichia coli counts of 0cfu.100ml-1. The observed effect was related to a number of possible conditions prevailing in the system, including elevated pH, sunlight and dissolved oxygen. It was also found that the IHRAP greatly enhanced the nutrient removal capabilities of the conventional IAPS, making it possible to reliably and consistently maintain phosphate and ammonium levels in the final effluent to below 5mg.l-1 and 2mg.l-1 respectively (South African discharge standards are 10mg.l-1 and 3mg.l-1 in each case). The quality of the final effluent produced by the optimisation of the IAPS would allow it to be used for irrigation, thereby providing an alternative water source in water stressed areas. The system also proved to be exceptionally robust and data collected during periods of intensive and low management regimes were broadly comparable. Results of the 9 year study have demonstrated reliable performance of the IAPS and its use an appropriate, sustainable wastewater treatment option for small communities.
- Full Text:
- Date Issued: 2005
The enzymology of enhanced hydrolysis within the biosulphidogenic recycling sludge bed reactor (RSBR)
- Authors: Enongene, Godlove Nkwelle
- Date: 2004
- Subjects: Hydrolysis , Sewage sludge , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4132 , http://hdl.handle.net/10962/d1015744
- Description: The hydrolysis of complex organic heteropolymers contained in municipal wastewater to simpler monomers by extracellular hydrolytic enzymes is generally considered the rate-limiting step of the biodegradation process. Previous studies of the Recycling Sludge Bed Reactor (RSBR) revealed that the hydrolysis of complex particulate organics, such as those contained in primary sludge (PS), was enhanced under anaerobic biosulphidogenic conditions. Although the mechanism was not fully understood, it appeared to involve the interaction of sulfide and sludge flocs. The current study was conducted using a 3500 ml laboratory-scale RSBR fed sieved PS at a loading rate of 0.5 kg COD/m³.day and an initial chemical oxygen demand (COD) to sulfate ratio (COD:SO₄) of 1:1. There was no significant accumulation of undigested sludge in the reactor over the 60-day experimental period and the quantity of SO₄ reduced indicated that the yield of soluble products from PS was at least as high as those reported previously for this system (> 50%). In the current study, the specific activities of a range of extracellular hydrolytic enzymes (L-alanine aminopeptidase, L-leucine aminopeptidase, arylsulphatase, α-glucosidase, β- glucosidase, protease and lipase) were monitored in a sulfide gradient within a biosulphidogenic RSBR. Data obtained indicated that the specific enzymatic activities increased with the depth of the RSBR and also correlated with a number of the physicochemical parameters including sulfide, alkalinity and sulfate. The activities of α- glucosidase and β-glucosidase were higher than that of the other enzymes studied. Lipase activity was relatively low and studies conducted on the enzyme-enzyme interaction using specific enzyme inhibitors indicated that lipases were probably being digested by the proteases. Further studies to determine the impact of sulfide on the enzymes, showed an increase in the enzyme activity with increasing sulfide concentration. Possible direct affects were investigated by looking for changes in the Michaelis constant (Km) and the maximal velocity (Vmax) of the crude enzymes with varying sulfide concentrations (250, 400 and 500 mg/l) using natural and synthetic substrates. The results showed no significant difference in both the Km and the Vmax for any of the hydrolytic enzymes except for the protease. The latter showed a statistically significant increase in the Km with increasing sulfide concentration. Although this indicated a direct interaction, this difference was not large enough to be of biochemical significance and was consequently not solely responsible for the enhanced hydrolysis observed in the RSBR. Investigation into the floc characteristics indicated that the biosulphidogenic RSBR flocs were generally small in size and became more dendritic with the depth of the RSBR. Based on the above data, the previously proposed descriptive models of enhanced hydrolysis of particulate organic matter in a biosulphidogenic RSBR has been revised. It is thought that the effect of sulfide on the hydrolysis step is primarily indirect and that the reduction in floc size and alteration of the floc shape to a more dendritic form is central to the success of the process.
- Full Text:
- Date Issued: 2004
- Authors: Enongene, Godlove Nkwelle
- Date: 2004
- Subjects: Hydrolysis , Sewage sludge , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4132 , http://hdl.handle.net/10962/d1015744
- Description: The hydrolysis of complex organic heteropolymers contained in municipal wastewater to simpler monomers by extracellular hydrolytic enzymes is generally considered the rate-limiting step of the biodegradation process. Previous studies of the Recycling Sludge Bed Reactor (RSBR) revealed that the hydrolysis of complex particulate organics, such as those contained in primary sludge (PS), was enhanced under anaerobic biosulphidogenic conditions. Although the mechanism was not fully understood, it appeared to involve the interaction of sulfide and sludge flocs. The current study was conducted using a 3500 ml laboratory-scale RSBR fed sieved PS at a loading rate of 0.5 kg COD/m³.day and an initial chemical oxygen demand (COD) to sulfate ratio (COD:SO₄) of 1:1. There was no significant accumulation of undigested sludge in the reactor over the 60-day experimental period and the quantity of SO₄ reduced indicated that the yield of soluble products from PS was at least as high as those reported previously for this system (> 50%). In the current study, the specific activities of a range of extracellular hydrolytic enzymes (L-alanine aminopeptidase, L-leucine aminopeptidase, arylsulphatase, α-glucosidase, β- glucosidase, protease and lipase) were monitored in a sulfide gradient within a biosulphidogenic RSBR. Data obtained indicated that the specific enzymatic activities increased with the depth of the RSBR and also correlated with a number of the physicochemical parameters including sulfide, alkalinity and sulfate. The activities of α- glucosidase and β-glucosidase were higher than that of the other enzymes studied. Lipase activity was relatively low and studies conducted on the enzyme-enzyme interaction using specific enzyme inhibitors indicated that lipases were probably being digested by the proteases. Further studies to determine the impact of sulfide on the enzymes, showed an increase in the enzyme activity with increasing sulfide concentration. Possible direct affects were investigated by looking for changes in the Michaelis constant (Km) and the maximal velocity (Vmax) of the crude enzymes with varying sulfide concentrations (250, 400 and 500 mg/l) using natural and synthetic substrates. The results showed no significant difference in both the Km and the Vmax for any of the hydrolytic enzymes except for the protease. The latter showed a statistically significant increase in the Km with increasing sulfide concentration. Although this indicated a direct interaction, this difference was not large enough to be of biochemical significance and was consequently not solely responsible for the enhanced hydrolysis observed in the RSBR. Investigation into the floc characteristics indicated that the biosulphidogenic RSBR flocs were generally small in size and became more dendritic with the depth of the RSBR. Based on the above data, the previously proposed descriptive models of enhanced hydrolysis of particulate organic matter in a biosulphidogenic RSBR has been revised. It is thought that the effect of sulfide on the hydrolysis step is primarily indirect and that the reduction in floc size and alteration of the floc shape to a more dendritic form is central to the success of the process.
- Full Text:
- Date Issued: 2004
The enzymology of sludge solubilisation under biosulphidogenic conditions : isolation, characterisation and partial purification of endoglucanases
- Authors: Oyekola, Oluwaseun Oyekanmi
- Date: 2004
- Subjects: Sewage -- Purification -- Anaerobic treatment , Anaerobic bacteria , Sewage sludge , Hydrolysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3921 , http://hdl.handle.net/10962/d1003980 , Sewage -- Purification -- Anaerobic treatment , Anaerobic bacteria , Sewage sludge , Hydrolysis
- Description: Endoglucanases play an important function in cellulose hydrolysis and catalyse the initial attack on the polymer by randomly hydrolysing the β-1,4 glucosidic bonds within the amorphous regions of cellulose chains. Cellulolytic bacteria have been isolated and characterised from the sewage sludge and the activation of several hydrolytic enzymes under biosulphidogenic conditions of sewage hydrolysis has been reported. The aims of this study were to: identify, induce production, locate and isolate, characterise (physicochemical and kinetic) and purify endoglucanases from anaerobic biosulphidogenic sludge. The endoglucanase activities were shown to be associated with the pellet particulate matter and exhibited a pH optimum of 6 and temperature optimum of 50 °C. The enzymes were thermally more stable when immobilised to the floc matrix of the sludge than when they were released into the aqueous solution via sonication. For both immobilised and released enzymes, sulphate was slightly inhibitory; activity was reduced to 84 % and 77.5 % of the initial activity at sulphate concentrations between 200 and 1000 mg/l, respectively. Sulphite was stimulatory to the immobilised enzymes between 200 and 1000 mg/l. Sulphide stimulated the activities of the immobilised endoglucanases, but inhibited activities of the soluble enzymes above 200 mg/l. The enzyme fraction did not hydrolyse avicel (a crystalline substrate), indicating the absence of any exocellulase activity. For CMC (carboxymethylcellulose) and HEC (hydroxylethylcellulose) the enzyme had K_m,app_ values of 4 and 5.1 mg/ml respectively and V_max,app_ values of 0.297 and 0.185 μmol/min/ml respectively. Divalent ions (Cu²⁺, Ni²⁺ and Zn²⁺) proved to be inhibitory while Fe²⁺, Mg²⁺ and Ca²⁺ stimulated the enzyme at concentrations between 200 and 1000 mg/l. All the volatile fatty acids studied (acetic acid, butyric acid, propionic acid and valeric acid) inhibited the enzymes, with acetic acid eliciting the highest degree of inhibition. Sonication released ~74.9 % of the total enzyme activities into solution and this was partially purified by PEG 20 000 concentration followed by DEAE-Cellulose ion exchange chromatography, which resulted in an appreciable purity as measured by the purification factor, 25.4 fold.
- Full Text:
- Date Issued: 2004
- Authors: Oyekola, Oluwaseun Oyekanmi
- Date: 2004
- Subjects: Sewage -- Purification -- Anaerobic treatment , Anaerobic bacteria , Sewage sludge , Hydrolysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3921 , http://hdl.handle.net/10962/d1003980 , Sewage -- Purification -- Anaerobic treatment , Anaerobic bacteria , Sewage sludge , Hydrolysis
- Description: Endoglucanases play an important function in cellulose hydrolysis and catalyse the initial attack on the polymer by randomly hydrolysing the β-1,4 glucosidic bonds within the amorphous regions of cellulose chains. Cellulolytic bacteria have been isolated and characterised from the sewage sludge and the activation of several hydrolytic enzymes under biosulphidogenic conditions of sewage hydrolysis has been reported. The aims of this study were to: identify, induce production, locate and isolate, characterise (physicochemical and kinetic) and purify endoglucanases from anaerobic biosulphidogenic sludge. The endoglucanase activities were shown to be associated with the pellet particulate matter and exhibited a pH optimum of 6 and temperature optimum of 50 °C. The enzymes were thermally more stable when immobilised to the floc matrix of the sludge than when they were released into the aqueous solution via sonication. For both immobilised and released enzymes, sulphate was slightly inhibitory; activity was reduced to 84 % and 77.5 % of the initial activity at sulphate concentrations between 200 and 1000 mg/l, respectively. Sulphite was stimulatory to the immobilised enzymes between 200 and 1000 mg/l. Sulphide stimulated the activities of the immobilised endoglucanases, but inhibited activities of the soluble enzymes above 200 mg/l. The enzyme fraction did not hydrolyse avicel (a crystalline substrate), indicating the absence of any exocellulase activity. For CMC (carboxymethylcellulose) and HEC (hydroxylethylcellulose) the enzyme had K_m,app_ values of 4 and 5.1 mg/ml respectively and V_max,app_ values of 0.297 and 0.185 μmol/min/ml respectively. Divalent ions (Cu²⁺, Ni²⁺ and Zn²⁺) proved to be inhibitory while Fe²⁺, Mg²⁺ and Ca²⁺ stimulated the enzyme at concentrations between 200 and 1000 mg/l. All the volatile fatty acids studied (acetic acid, butyric acid, propionic acid and valeric acid) inhibited the enzymes, with acetic acid eliciting the highest degree of inhibition. Sonication released ~74.9 % of the total enzyme activities into solution and this was partially purified by PEG 20 000 concentration followed by DEAE-Cellulose ion exchange chromatography, which resulted in an appreciable purity as measured by the purification factor, 25.4 fold.
- Full Text:
- Date Issued: 2004
- «
- ‹
- 1
- ›
- »