A case study approach to assess the growth towards world class at EH Walton Packaging (Pty) Ltd
- Authors: Piron, Susan
- Date: 2008
- Subjects: Total quality management , Manufacturing resource planning
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9816 , http://hdl.handle.net/10948/d1018759
- Description: The Printing and Packaging Industry in South Africa has become very competitive over the last decade. Imports and the move towards environmentally friendly packaging have put additional strain on certain sectors of this industry. EH Walton Packaging (Pty) Ltd is one of oldest converters in the industry, established in 1845, and has always been a leader with regards to new technology. It has grown from a small, family business to one of the biggest and most respected in South Africa, but it is still a private company. Due to the rapid growth the shareholders approved a multi-million rand expansion project in 2000. After completion the anticipated increase in shareholder value did not materialize, even though the production facility is always busy. The objective of this research study is to demonstrate to senior management that quality does not end with accreditation of ISO 9001:2000, but that total quality management is invaluable as a business strategy to reach world class manufacturing standards and to sustain organisational excellence. The research will investigate the origins and development of total quality management and world-class manufacturing and extract the most important elements that form the basis of sustainable competitiveness, as well as research done on the reasons why businesses fail. These elements will be further investigated, with special emphasis on the African/South African environment. Research showed that sustained excellence in business and quality is based on customer focus, guided by strategic planning, with leadership at the core, enhanced by philosophy, employee improvement and involvement, and quality assurance. Failure of achieving excellence is best summarized by Deming’s Seven Deadly Sins. The case study approach that was followed to determine the status of total quality elements within the company yielded contrasting results. A number of the “sins” were identified as present in the business strategy; levels of leadership varies from traditional Summary to high performance; understanding of where the company is heading is fragmented; there are no social programs in place and training only concentrates on apprenticeships and not on developing shop floor skills – to mention a few. Surprising is the world-class orientation with regards to customers; but again, this is contrasted with the lack of active customer satisfaction initiatives. The study concludes that although many negative aspects exist and that the prevailing culture does not appear to support change towards world-class growth, there is an element of positive energy among employees. Most of the employees who participated in the study believe that the company has a bright future. It is these attitudes that must be used to drive change, with a clear vision, good strategies and world-class leaders.
- Full Text:
- Date Issued: 2008
- Authors: Piron, Susan
- Date: 2008
- Subjects: Total quality management , Manufacturing resource planning
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9816 , http://hdl.handle.net/10948/d1018759
- Description: The Printing and Packaging Industry in South Africa has become very competitive over the last decade. Imports and the move towards environmentally friendly packaging have put additional strain on certain sectors of this industry. EH Walton Packaging (Pty) Ltd is one of oldest converters in the industry, established in 1845, and has always been a leader with regards to new technology. It has grown from a small, family business to one of the biggest and most respected in South Africa, but it is still a private company. Due to the rapid growth the shareholders approved a multi-million rand expansion project in 2000. After completion the anticipated increase in shareholder value did not materialize, even though the production facility is always busy. The objective of this research study is to demonstrate to senior management that quality does not end with accreditation of ISO 9001:2000, but that total quality management is invaluable as a business strategy to reach world class manufacturing standards and to sustain organisational excellence. The research will investigate the origins and development of total quality management and world-class manufacturing and extract the most important elements that form the basis of sustainable competitiveness, as well as research done on the reasons why businesses fail. These elements will be further investigated, with special emphasis on the African/South African environment. Research showed that sustained excellence in business and quality is based on customer focus, guided by strategic planning, with leadership at the core, enhanced by philosophy, employee improvement and involvement, and quality assurance. Failure of achieving excellence is best summarized by Deming’s Seven Deadly Sins. The case study approach that was followed to determine the status of total quality elements within the company yielded contrasting results. A number of the “sins” were identified as present in the business strategy; levels of leadership varies from traditional Summary to high performance; understanding of where the company is heading is fragmented; there are no social programs in place and training only concentrates on apprenticeships and not on developing shop floor skills – to mention a few. Surprising is the world-class orientation with regards to customers; but again, this is contrasted with the lack of active customer satisfaction initiatives. The study concludes that although many negative aspects exist and that the prevailing culture does not appear to support change towards world-class growth, there is an element of positive energy among employees. Most of the employees who participated in the study believe that the company has a bright future. It is these attitudes that must be used to drive change, with a clear vision, good strategies and world-class leaders.
- Full Text:
- Date Issued: 2008
Monitoring population trends of introduced rusa deer (Cervus timorensis russa) in New Caledonian sclerophyll forests : tests and relevance of methods for management programmes
- Authors: Roques-Rogery, Guillaume
- Date: 2008
- Subjects: Cervus timorensis -- Caledon , Deer -- Management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10750 , http://hdl.handle.net/10948/727 , Cervus timorensis -- Caledon , Deer -- Management
- Description: New Caledonia, an archipelago situated in the South-West Pacific Ocean has a very high biodiversity of which many flora and fauna species are endemic, and is therefore considered as one of the world hotspots for the biodiversity conservation. Sclerophyll forests, one of the five main vegetation types occurring on the island are mainly threatened by anthropogenic activities. Rusa deer (Cervus timorensis russa) were introduced into New Caledonia from Java in 1870. They have colonised all the biotopes of the main island, and represent one of the major threats to the New Caledonian sclerophyll forests. Currently, there is a lack of management tools to monitor the trends of rusa deer in New Caledonian sclerophyll forests. To test monitoring methods for use as management tools, six sclerophyll forests study sites were studied using direct census methods (i.e. spotlight count and drive count), indirect census methods (i.e. faecal standing crop method) and three indices (i.e. the faecal pellet groups index, the browsing index and the antler rubbing index). The faecal pellet groups index is based on sampling pellet groups in plots along transects. To ensure reliable data collection with a coefficient of variation of the mean number of intact faecal pellet groups per plot per transect of less than 20 percent, my study indicated that 15 plots per transect and 20 transects per sites should be sampled in New Caledonian sclerophyll forests whereas previous studies conducted in New Zealand indicated that a minimum of 25 plots per transect and of 18 transects per site should be sampled. The advantages of reducing the number of plots per transect and of transects per site is that it reduces the expenses (e.g. time, finance) and the bias due to data collection (e.g. fatigue, boredom and visual activity) which will improve the precision of the data recorded. Estimates of rusa deer density obtained from the census methods were not correlated (r = - 0.425, df = 4, P = 0.401) due to my small sample size. The reliability of these estimates is questionable because of biases. Previous publications have shown that biases are difficult to avoid when using direct census methods and that it is difficult to estimate the size of animal populations with accuracy and precision. The faecal standing crop method was subjected to bias because the estimation of the decay rate and the defecation rate were unreliable. These methods were not recommended for rusa deer management in New Caledonian sclerophyll forests. Of the three indices tested, the faecal pellet groups index and the browsing index based on unpalatable browse species were the most reliable as the confidence intervals of these two indices were small (i.e. from ±0.08 to ±0.11 for the faecal pellet groups index; from ±0.04 to ±0.27 for the browsing index of unpalatable browse species), and they also showed significant correlations with a subjective ranking of the rusa deer density based on expert knowledge (rs = 0.829, df = 4, P = 0.042 and rs = 0.829, df = 4, P = 0.042 respectively). These two indices appear to show the most promise for use as management tools, as they could reliably track local variations of rusa deer densities on the sclerophyll forests. These two indices could be used by wildlife technicians in New Caledonia to establish management plans of rusa deer populations which rely on participative management involving the stakeholders (e.g. hunters, forest managers, local communities). We believe that the faecal pellet groups index and the browsing index could be useful to monitor rusa deer populations in New Caledonian sclerophyll forests, and meet conservation and hunting objectives of the local population and authorities. Management tools such as culling and hunting operations will be implemented in New Caledonian sclerophyll forests where monitoring of indices I recommended show an increase in the deer population. Stakeholders will be involved in the implementation of the monitoring tools (i.e. indices) and of the management tools (e.g. culling and hunting operations, fencing) but also in decision making for the management of the rusa deer in New Caledonian sclerophyll forests.
- Full Text:
- Date Issued: 2008
- Authors: Roques-Rogery, Guillaume
- Date: 2008
- Subjects: Cervus timorensis -- Caledon , Deer -- Management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10750 , http://hdl.handle.net/10948/727 , Cervus timorensis -- Caledon , Deer -- Management
- Description: New Caledonia, an archipelago situated in the South-West Pacific Ocean has a very high biodiversity of which many flora and fauna species are endemic, and is therefore considered as one of the world hotspots for the biodiversity conservation. Sclerophyll forests, one of the five main vegetation types occurring on the island are mainly threatened by anthropogenic activities. Rusa deer (Cervus timorensis russa) were introduced into New Caledonia from Java in 1870. They have colonised all the biotopes of the main island, and represent one of the major threats to the New Caledonian sclerophyll forests. Currently, there is a lack of management tools to monitor the trends of rusa deer in New Caledonian sclerophyll forests. To test monitoring methods for use as management tools, six sclerophyll forests study sites were studied using direct census methods (i.e. spotlight count and drive count), indirect census methods (i.e. faecal standing crop method) and three indices (i.e. the faecal pellet groups index, the browsing index and the antler rubbing index). The faecal pellet groups index is based on sampling pellet groups in plots along transects. To ensure reliable data collection with a coefficient of variation of the mean number of intact faecal pellet groups per plot per transect of less than 20 percent, my study indicated that 15 plots per transect and 20 transects per sites should be sampled in New Caledonian sclerophyll forests whereas previous studies conducted in New Zealand indicated that a minimum of 25 plots per transect and of 18 transects per site should be sampled. The advantages of reducing the number of plots per transect and of transects per site is that it reduces the expenses (e.g. time, finance) and the bias due to data collection (e.g. fatigue, boredom and visual activity) which will improve the precision of the data recorded. Estimates of rusa deer density obtained from the census methods were not correlated (r = - 0.425, df = 4, P = 0.401) due to my small sample size. The reliability of these estimates is questionable because of biases. Previous publications have shown that biases are difficult to avoid when using direct census methods and that it is difficult to estimate the size of animal populations with accuracy and precision. The faecal standing crop method was subjected to bias because the estimation of the decay rate and the defecation rate were unreliable. These methods were not recommended for rusa deer management in New Caledonian sclerophyll forests. Of the three indices tested, the faecal pellet groups index and the browsing index based on unpalatable browse species were the most reliable as the confidence intervals of these two indices were small (i.e. from ±0.08 to ±0.11 for the faecal pellet groups index; from ±0.04 to ±0.27 for the browsing index of unpalatable browse species), and they also showed significant correlations with a subjective ranking of the rusa deer density based on expert knowledge (rs = 0.829, df = 4, P = 0.042 and rs = 0.829, df = 4, P = 0.042 respectively). These two indices appear to show the most promise for use as management tools, as they could reliably track local variations of rusa deer densities on the sclerophyll forests. These two indices could be used by wildlife technicians in New Caledonia to establish management plans of rusa deer populations which rely on participative management involving the stakeholders (e.g. hunters, forest managers, local communities). We believe that the faecal pellet groups index and the browsing index could be useful to monitor rusa deer populations in New Caledonian sclerophyll forests, and meet conservation and hunting objectives of the local population and authorities. Management tools such as culling and hunting operations will be implemented in New Caledonian sclerophyll forests where monitoring of indices I recommended show an increase in the deer population. Stakeholders will be involved in the implementation of the monitoring tools (i.e. indices) and of the management tools (e.g. culling and hunting operations, fencing) but also in decision making for the management of the rusa deer in New Caledonian sclerophyll forests.
- Full Text:
- Date Issued: 2008
Process for the preparation of cis- AND trans-3,7-Dimethyl 2,6-Octadiene-1-OL from crude sulphated turpentine stream
- Sathikge, Ndavheleseni David
- Authors: Sathikge, Ndavheleseni David
- Date: 2008
- Subjects: Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10398 , http://hdl.handle.net/10948/734 , Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Description: As part of CSIR Biosciences’ interest in aroma chemicals, the processing of crude sulphated turpentine (CST) into high value aroma products was investigated. The primary target product, linalool, was obtained from a mixture of α- and β-pinene in four steps. It can be transformed into a wide range of high value added aroma chemicals. Isomerisation of linalool in the presence of a transition metal catalyst furnishes geraniol and nerol. The scientific work described in this report was part of a bigger project aimed at developing innovative processes to manufacture aroma, flavour & fragrance chemicals through beneficiation of industrial waste streams and other raw materials, available locally from the Forestry, Paper & Pulp industries. The evaluation of a process for the preparation of precursor aroma, flavour & fragrance compounds, in particular geraniol and nerol, from locally available raw materials and industrial waste streams, was investigated. Preparation of geraniol and nerol from linalool (ex α-pinene stream) was investigated using acids or organometallic complexes as catalysts for the corresponding isomerisation reaction. The investigation was conducted in an effort to find a less costly process utilising milder conditions than via the conventional cleavage of β-pinene to myrcene under extreme pyrolysis conditions (>650°C). The transformation of linalool to geraniol/nerol using mineral acids was found to be dominated by secondary reactions such as dehydration and cyclisation, resulting in poor product selectivities and yields. On the other hand, organometallic complexes, in particular vanadium-based complexes (e.g. (OV(OBu)3) produced satisfactory results in the preliminary assessment (conversion of 79.8 percent and selectivity of 98.3 percent). A set of statistically designed experiments was carried out on the (VO(BuO)3 + [(Bu)4N+]OH¯) catalyst system where three variables were tested, i.e. substrate concentration, temperature, and catalyst loading. The selected model for conversion was significant with the “Probability > F” being < 0.0001. The most important contributing variable to the model for conversion was temperature i.e. 83.9 percent. Temperature was still the most important variable for the selectivity response at 65.0 percent contribution level. The response surface generated for the selectivity response was flat indicating a robust method within the parameter range selected.
- Full Text:
- Date Issued: 2008
- Authors: Sathikge, Ndavheleseni David
- Date: 2008
- Subjects: Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10398 , http://hdl.handle.net/10948/734 , Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Description: As part of CSIR Biosciences’ interest in aroma chemicals, the processing of crude sulphated turpentine (CST) into high value aroma products was investigated. The primary target product, linalool, was obtained from a mixture of α- and β-pinene in four steps. It can be transformed into a wide range of high value added aroma chemicals. Isomerisation of linalool in the presence of a transition metal catalyst furnishes geraniol and nerol. The scientific work described in this report was part of a bigger project aimed at developing innovative processes to manufacture aroma, flavour & fragrance chemicals through beneficiation of industrial waste streams and other raw materials, available locally from the Forestry, Paper & Pulp industries. The evaluation of a process for the preparation of precursor aroma, flavour & fragrance compounds, in particular geraniol and nerol, from locally available raw materials and industrial waste streams, was investigated. Preparation of geraniol and nerol from linalool (ex α-pinene stream) was investigated using acids or organometallic complexes as catalysts for the corresponding isomerisation reaction. The investigation was conducted in an effort to find a less costly process utilising milder conditions than via the conventional cleavage of β-pinene to myrcene under extreme pyrolysis conditions (>650°C). The transformation of linalool to geraniol/nerol using mineral acids was found to be dominated by secondary reactions such as dehydration and cyclisation, resulting in poor product selectivities and yields. On the other hand, organometallic complexes, in particular vanadium-based complexes (e.g. (OV(OBu)3) produced satisfactory results in the preliminary assessment (conversion of 79.8 percent and selectivity of 98.3 percent). A set of statistically designed experiments was carried out on the (VO(BuO)3 + [(Bu)4N+]OH¯) catalyst system where three variables were tested, i.e. substrate concentration, temperature, and catalyst loading. The selected model for conversion was significant with the “Probability > F” being < 0.0001. The most important contributing variable to the model for conversion was temperature i.e. 83.9 percent. Temperature was still the most important variable for the selectivity response at 65.0 percent contribution level. The response surface generated for the selectivity response was flat indicating a robust method within the parameter range selected.
- Full Text:
- Date Issued: 2008
A standards-based security model for health information systems
- Authors: Thomson, Steven Michael
- Date: 2008
- Subjects: Computer networks -- Security measures -- Standards -- South Africa , Data protection -- Management -- Standards , Computer security -- South Africa -- Management , Computers -- Access control -- South Africa , Management information systems -- Security measures -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9786 , http://hdl.handle.net/10948/718 , Computer networks -- Security measures -- Standards -- South Africa , Data protection -- Management -- Standards , Computer security -- South Africa -- Management , Computers -- Access control -- South Africa , Management information systems -- Security measures -- South Africa
- Description: In the healthcare environment, various types of patient information are stored in electronic format. This prevents the re-entering of information that was captured previously. In the past this information was stored on paper and kept in large filing cabinets. However, with the technology advancements that have occurred over the years, the idea of storing patient information in electronic systems arose. This led to a number of electronic health information systems being created, which in turn led to an increase in possible security risks. Any organization that stores information of a sensitive nature must apply information security principles in order to ensure that the stored information is kept secure. At a basic level, this entails ensuring the confidentiality, integrity and availability of the information, which is not an easy feat in today’s distributed and networked environments. This paved the way for organized standardization activities in the areas of information security and information security management. Throughout history, there have been practices that were created to help “standardize” industries of all areas, to the extent that there are professional organizations whose main objective it is to create such standards to help connect industries all over the world. This applies equally to the healthcare environment, where standardization took off in the late eighties. Healthcare organizations must follow standardized security measures to ensure that patient information stored in health information systems is kept secure. However, the proliferation in standards makes it difficult to understand, adopt and deploy these standards in a coherent manner. This research, therefore, proposes a standards-based security model for health information systems to ensure that such standards are applied in a manner that contributes to securing the healthcare environment as a whole, rather than in a piecemeal fashion.
- Full Text:
- Date Issued: 2008
- Authors: Thomson, Steven Michael
- Date: 2008
- Subjects: Computer networks -- Security measures -- Standards -- South Africa , Data protection -- Management -- Standards , Computer security -- South Africa -- Management , Computers -- Access control -- South Africa , Management information systems -- Security measures -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9786 , http://hdl.handle.net/10948/718 , Computer networks -- Security measures -- Standards -- South Africa , Data protection -- Management -- Standards , Computer security -- South Africa -- Management , Computers -- Access control -- South Africa , Management information systems -- Security measures -- South Africa
- Description: In the healthcare environment, various types of patient information are stored in electronic format. This prevents the re-entering of information that was captured previously. In the past this information was stored on paper and kept in large filing cabinets. However, with the technology advancements that have occurred over the years, the idea of storing patient information in electronic systems arose. This led to a number of electronic health information systems being created, which in turn led to an increase in possible security risks. Any organization that stores information of a sensitive nature must apply information security principles in order to ensure that the stored information is kept secure. At a basic level, this entails ensuring the confidentiality, integrity and availability of the information, which is not an easy feat in today’s distributed and networked environments. This paved the way for organized standardization activities in the areas of information security and information security management. Throughout history, there have been practices that were created to help “standardize” industries of all areas, to the extent that there are professional organizations whose main objective it is to create such standards to help connect industries all over the world. This applies equally to the healthcare environment, where standardization took off in the late eighties. Healthcare organizations must follow standardized security measures to ensure that patient information stored in health information systems is kept secure. However, the proliferation in standards makes it difficult to understand, adopt and deploy these standards in a coherent manner. This research, therefore, proposes a standards-based security model for health information systems to ensure that such standards are applied in a manner that contributes to securing the healthcare environment as a whole, rather than in a piecemeal fashion.
- Full Text:
- Date Issued: 2008
Effect of a South African medicinal plant on antiretroviral drug induced abnormalities in rats
- Authors: Van Gend, Tania Anli
- Date: 2008
- Subjects: Medicinal plants -- South Africa , Antiretroviral agents -- South Africa , Materia medica, Vegetable -- South Africa , HIV infections -- Alternative treatment -- South Africa , Rats as laboratory animals , Rats -- Metabolism
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10121 , http://hdl.handle.net/10948/1080 , Medicinal plants -- South Africa , Antiretroviral agents -- South Africa , Materia medica, Vegetable -- South Africa , HIV infections -- Alternative treatment -- South Africa , Rats as laboratory animals , Rats -- Metabolism
- Description: The worldwide AIDS epidemic is known to have had a profoundly negative social, economic and personal impact and has taken a heavy toll on existing health care systems, particularly in developing countries. South Africa is experiencing an HIV epidemic with enormous social and economic consequences. Lopinavir/ritonavir antiretroviral treatment has been accredited with having a significantly positive effect and is a key advance in controlling HIV morbidity and mortality. An indigenous South African medicinal plant, Sutherlandia frutescens, known for its anti-diabetic properties and immune-boosting effects, is used for treating HIV positive patients suffering from opportunistic infections. Despite the use of the medicinal plant extract as homeotherapeutic medication, there is little evidence of toxicity testing that identifies its potential for interaction with antiretroviral drugs. However, scientific data relating to the mechanism through which Sutherlandia frutescens acts on the immune system has not been comprehensively documented. The aim of this study was to investigate lopinavir/ritonavir induced metabolic abnormalities in rats and whether the introduction of a plant extract of Sutherlandia frutescens would counteract the side effects of ARV medication. The results indicated that the rodents did not become insulin resistant, however, biochemical analysis indicated that extended ARV drug treatment would have caused insulin resistance. Significant morphological changes were found in the livers, kidneys and pancreases of rats exposed to the lopinavir/ritonavir. Rats exposed to the Sutherlandia frutescens plant extract showed improved histopathology with minimal abnormalities.
- Full Text:
- Date Issued: 2008
- Authors: Van Gend, Tania Anli
- Date: 2008
- Subjects: Medicinal plants -- South Africa , Antiretroviral agents -- South Africa , Materia medica, Vegetable -- South Africa , HIV infections -- Alternative treatment -- South Africa , Rats as laboratory animals , Rats -- Metabolism
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10121 , http://hdl.handle.net/10948/1080 , Medicinal plants -- South Africa , Antiretroviral agents -- South Africa , Materia medica, Vegetable -- South Africa , HIV infections -- Alternative treatment -- South Africa , Rats as laboratory animals , Rats -- Metabolism
- Description: The worldwide AIDS epidemic is known to have had a profoundly negative social, economic and personal impact and has taken a heavy toll on existing health care systems, particularly in developing countries. South Africa is experiencing an HIV epidemic with enormous social and economic consequences. Lopinavir/ritonavir antiretroviral treatment has been accredited with having a significantly positive effect and is a key advance in controlling HIV morbidity and mortality. An indigenous South African medicinal plant, Sutherlandia frutescens, known for its anti-diabetic properties and immune-boosting effects, is used for treating HIV positive patients suffering from opportunistic infections. Despite the use of the medicinal plant extract as homeotherapeutic medication, there is little evidence of toxicity testing that identifies its potential for interaction with antiretroviral drugs. However, scientific data relating to the mechanism through which Sutherlandia frutescens acts on the immune system has not been comprehensively documented. The aim of this study was to investigate lopinavir/ritonavir induced metabolic abnormalities in rats and whether the introduction of a plant extract of Sutherlandia frutescens would counteract the side effects of ARV medication. The results indicated that the rodents did not become insulin resistant, however, biochemical analysis indicated that extended ARV drug treatment would have caused insulin resistance. Significant morphological changes were found in the livers, kidneys and pancreases of rats exposed to the lopinavir/ritonavir. Rats exposed to the Sutherlandia frutescens plant extract showed improved histopathology with minimal abnormalities.
- Full Text:
- Date Issued: 2008
Analysis and modelling of the temperature distribution during the friction taper stud welding of 10CrMo910
- Van Zyl, Carlo Angelo Antonio
- Authors: Van Zyl, Carlo Angelo Antonio
- Date: 2008
- Subjects: Friction welding , Pressure welding
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9630 , http://hdl.handle.net/10948/720 , http://hdl.handle.net/10948/d1012898 , Friction welding , Pressure welding
- Description: Heat generation during the FTSW process plays and important role in determining the characteristics of the weld. In order to obtain temperature fields, a transient temperature heat analysis is required. An area is the maximum temperatures reached within the base material during the FTSW process. These temperatures will be measured during experimentation, and compared to the welding simulation done using FEA. From the literature search it appeared that no heat transfer analysis had been done using finite element methods.
- Full Text:
- Date Issued: 2008
- Authors: Van Zyl, Carlo Angelo Antonio
- Date: 2008
- Subjects: Friction welding , Pressure welding
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9630 , http://hdl.handle.net/10948/720 , http://hdl.handle.net/10948/d1012898 , Friction welding , Pressure welding
- Description: Heat generation during the FTSW process plays and important role in determining the characteristics of the weld. In order to obtain temperature fields, a transient temperature heat analysis is required. An area is the maximum temperatures reached within the base material during the FTSW process. These temperatures will be measured during experimentation, and compared to the welding simulation done using FEA. From the literature search it appeared that no heat transfer analysis had been done using finite element methods.
- Full Text:
- Date Issued: 2008
The impact of cultural context on web design for e-Government in South Africa
- Authors: Yeratziotis, Alexandros
- Date: 2008
- Subjects: Internet in public administration -- South Africa , Web sites -- Design , Culture
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9741 , http://hdl.handle.net/10948/2116 , Internet in public administration -- South Africa , Web sites -- Design , Culture
- Description: The role and power of ICT today, particularly the Internet, cannot be underestimated. The Internet has a great impact on the business environment, where a large majority of companies and organisations have made substantial investments in an online presence in the form of websites, as well as the IT infrastructure needed to improve business processes. In terms of websites, research has shown that it is critical to identify the target market of the site and the actual users, and to construct the site according to their specific needs and preferences. This is to a large extent the focus of the field of Human Computer Interaction. It therefore makes perfect sense that many software products and websites fail to meet the users‟ needs, as they are designed mainly by Western designers for Eastern and African users. In essence, the failure is due to the fact that the design does not accommodate the cultural behaviours, understandings and preferences of the intended users, thus making it difficult for them to use and adopt them. This has been confirmed by many researchers who have studied various culture dimensions and their relation to Web design. As mentioned, the role of the Internet in terms of its effect in the business world is becoming increasingly important. However, the Internet could prove to play an influential role in the public sector as well and could therefore be used as a critical tool by government in the form of e-Government. Many countries are adopting e-Government initiatives in an attempt to improve their relations within government itself and with their citizens and businesses. This would help them to render better service delivery and at the same time empower the citizens to also participate in the governance of the country itself. The concept for this dissertation was formulated in terms of three key ingredients: e-Government, culture dimensions and Web design. The purpose of this dissertation is to examine the way a specific culture dimension, referred to as the cultural-context dimension, which focuses on the communication process, can impact in Web design. Once this is achieved, it will be possible to determine how this can positively affect the design of the South African e-Government website so that the overall usability of the site may be improved. The improvements will be justified because the site would then match the cultural behaviours, perceptions and Web design preferences of South African users. In short, the goal of this III dissertation is to provide guidelines and recommendations that will improve the South African e-Government website (www.gov.za) by examining anthropologist Edward Hall‟s cultural-context dimension and its role in the Web design process.
- Full Text:
- Date Issued: 2008
- Authors: Yeratziotis, Alexandros
- Date: 2008
- Subjects: Internet in public administration -- South Africa , Web sites -- Design , Culture
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9741 , http://hdl.handle.net/10948/2116 , Internet in public administration -- South Africa , Web sites -- Design , Culture
- Description: The role and power of ICT today, particularly the Internet, cannot be underestimated. The Internet has a great impact on the business environment, where a large majority of companies and organisations have made substantial investments in an online presence in the form of websites, as well as the IT infrastructure needed to improve business processes. In terms of websites, research has shown that it is critical to identify the target market of the site and the actual users, and to construct the site according to their specific needs and preferences. This is to a large extent the focus of the field of Human Computer Interaction. It therefore makes perfect sense that many software products and websites fail to meet the users‟ needs, as they are designed mainly by Western designers for Eastern and African users. In essence, the failure is due to the fact that the design does not accommodate the cultural behaviours, understandings and preferences of the intended users, thus making it difficult for them to use and adopt them. This has been confirmed by many researchers who have studied various culture dimensions and their relation to Web design. As mentioned, the role of the Internet in terms of its effect in the business world is becoming increasingly important. However, the Internet could prove to play an influential role in the public sector as well and could therefore be used as a critical tool by government in the form of e-Government. Many countries are adopting e-Government initiatives in an attempt to improve their relations within government itself and with their citizens and businesses. This would help them to render better service delivery and at the same time empower the citizens to also participate in the governance of the country itself. The concept for this dissertation was formulated in terms of three key ingredients: e-Government, culture dimensions and Web design. The purpose of this dissertation is to examine the way a specific culture dimension, referred to as the cultural-context dimension, which focuses on the communication process, can impact in Web design. Once this is achieved, it will be possible to determine how this can positively affect the design of the South African e-Government website so that the overall usability of the site may be improved. The improvements will be justified because the site would then match the cultural behaviours, perceptions and Web design preferences of South African users. In short, the goal of this III dissertation is to provide guidelines and recommendations that will improve the South African e-Government website (www.gov.za) by examining anthropologist Edward Hall‟s cultural-context dimension and its role in the Web design process.
- Full Text:
- Date Issued: 2008