Optical limiting behavior of ring substituted zinc, indium and gallium phthalocyanines in the presence of quantum dots
- Britton, Jonathan, Litwinski, Christian, Durmus, Mahmut, Chauke, Vongani, Nyokong, Tebello
- Authors: Britton, Jonathan , Litwinski, Christian , Durmus, Mahmut , Chauke, Vongani , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247122 , vital:51548 , xlink:href="https://doi.org/10.1142/S1088424611004142"
- Description: This paper presents the study of the effects of CdTe-TGA quantum dots (QDs) on optical limiting ability of different phthalocyanine (Pc) complexes (1–10) containing Zn, Ga, In central metals and substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups. The optical limiting parameters of Pcs were higher for tert-butylphenoxy when compared to benzyloxyphenoxy and phenoxy substituents, in DMSO. Non-peripheral substitution decreased the optical limiting parameters. Third-order susceptibility (Im[χ(3)]/α) values of Pcs in the absence and presence of CdTe QDs were in the 10-12 to 10-10 esu.cm range. Hyperpolarizabilities (γ) ranged from 10-31 to 10-29 esu L for Pc alone or in mixture with QDs. There is a general improvement in optical limiting ability of Pc complexes in the presence of CdTe TGA QDs. Due to these promising results, future work can be implemented for the creation of Pc:QD thin films, which would then be examined to ensure that their optical limiting ability is still acceptable.
- Full Text:
- Date Issued: 2011
- Authors: Britton, Jonathan , Litwinski, Christian , Durmus, Mahmut , Chauke, Vongani , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247122 , vital:51548 , xlink:href="https://doi.org/10.1142/S1088424611004142"
- Description: This paper presents the study of the effects of CdTe-TGA quantum dots (QDs) on optical limiting ability of different phthalocyanine (Pc) complexes (1–10) containing Zn, Ga, In central metals and substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups. The optical limiting parameters of Pcs were higher for tert-butylphenoxy when compared to benzyloxyphenoxy and phenoxy substituents, in DMSO. Non-peripheral substitution decreased the optical limiting parameters. Third-order susceptibility (Im[χ(3)]/α) values of Pcs in the absence and presence of CdTe QDs were in the 10-12 to 10-10 esu.cm range. Hyperpolarizabilities (γ) ranged from 10-31 to 10-29 esu L for Pc alone or in mixture with QDs. There is a general improvement in optical limiting ability of Pc complexes in the presence of CdTe TGA QDs. Due to these promising results, future work can be implemented for the creation of Pc:QD thin films, which would then be examined to ensure that their optical limiting ability is still acceptable.
- Full Text:
- Date Issued: 2011
Syntheses and electrochemical characterization of new water soluble octaarylthiosubstituted manganese phthalocyanines
- Booysen, Irvin N, Matemadombo, Fungisai, Durmus, Mahmut, Nyokong, Tebello
- Authors: Booysen, Irvin N , Matemadombo, Fungisai , Durmus, Mahmut , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247614 , vital:51600 , xlink:href="https://doi.org/10.1016/j.dyepig.2010.09.012"
- Description: This paper reports on the synthesis and characterization of new manganese phthalocyanine (MnPc) complexes: 2,3-octakis-[(2-mercaptopyridine) phthalocyaninato] acetato manganese (III) (1) and its quaternized (hence water soluble) derivative: 2,3-octakis-{[(N-methyl-2-mercaptopyridine) phthalocyaninato] acetato manganese (III)} sulphate (2). The complexes were used to form self assembled monolayers (SAMs). Voltammetry proved that both of the SAMs are well packed, strongly passivating and act as selective and efficient barriers to ion permeability. Furthermore, surface coverage studies confirmed that the MPc macrocycles adsorb onto the gold electrode as monolayers. Both MPc SAMs were successfully used as electrochemical sensors of nitrite.
- Full Text:
- Date Issued: 2011
- Authors: Booysen, Irvin N , Matemadombo, Fungisai , Durmus, Mahmut , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247614 , vital:51600 , xlink:href="https://doi.org/10.1016/j.dyepig.2010.09.012"
- Description: This paper reports on the synthesis and characterization of new manganese phthalocyanine (MnPc) complexes: 2,3-octakis-[(2-mercaptopyridine) phthalocyaninato] acetato manganese (III) (1) and its quaternized (hence water soluble) derivative: 2,3-octakis-{[(N-methyl-2-mercaptopyridine) phthalocyaninato] acetato manganese (III)} sulphate (2). The complexes were used to form self assembled monolayers (SAMs). Voltammetry proved that both of the SAMs are well packed, strongly passivating and act as selective and efficient barriers to ion permeability. Furthermore, surface coverage studies confirmed that the MPc macrocycles adsorb onto the gold electrode as monolayers. Both MPc SAMs were successfully used as electrochemical sensors of nitrite.
- Full Text:
- Date Issued: 2011
Optimal template removal from molecularly imprinted polymers by pressurized hot water extraction
- Batlokwa, Bareki Shima, Mokgadi, Janes, Nyokong, Tebello, Torto, Nelson
- Authors: Batlokwa, Bareki Shima , Mokgadi, Janes , Nyokong, Tebello , Torto, Nelson
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247813 , vital:51620 , xlink:href="https://doi.org/10.1007/s10337-010-1884-3"
- Description: An optimal extraction method for the removal of templates from molecularly imprinted polymers (MIPs) is presented. The extraction method is based on pressurized hot water extraction (PHWE). PHWE was evaluated by application to three distinctly colored MIPs for chlorophyll (green), quercetin (yellow) and phthalocynine (dark blue) with subsequent monitoring of template removal and template bleeding by an ultraviolet spectrophotometer. The templates were washed-off and the extraction efficiency (EE) was compared to that of soxhlet and ultrasonic extraction methods. PHWE employed hot water at an optimal temperature of 220 °C, pressure of 50 bars and flow rate of 2 mL min−1 to thoroughly wash-off the respective templates from their MIPs. The EE evaluated for PHWE was over 99.6% for all the MIPs with no subsequent or minimal template bleeding (more than 0.01%). The washing procedure was simple and relatively fast as it was achieved in 70 min at the most. At 95% confidence level (n = 3), soxhlet and ultrasonic recorded EE that was not significantly different (more than 94.5% in all cases) from that of PHWE (less than 99.6% in all cases). Soxhlet and ultrasonic had washing procedures that were slower (over 18 h) and employed large quantities (400 mL) of organic solvents modified with acids. The percentage relative standard deviations (%RSD) for the EE and recovery results were less than 2.3% in all cases indicating the high reproducibility of the method. Overall, the three methods performed comparably in extracting templates. PHWE seems to be the method of choice as it employed water which poses no environmental threat.
- Full Text:
- Date Issued: 2011
- Authors: Batlokwa, Bareki Shima , Mokgadi, Janes , Nyokong, Tebello , Torto, Nelson
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247813 , vital:51620 , xlink:href="https://doi.org/10.1007/s10337-010-1884-3"
- Description: An optimal extraction method for the removal of templates from molecularly imprinted polymers (MIPs) is presented. The extraction method is based on pressurized hot water extraction (PHWE). PHWE was evaluated by application to three distinctly colored MIPs for chlorophyll (green), quercetin (yellow) and phthalocynine (dark blue) with subsequent monitoring of template removal and template bleeding by an ultraviolet spectrophotometer. The templates were washed-off and the extraction efficiency (EE) was compared to that of soxhlet and ultrasonic extraction methods. PHWE employed hot water at an optimal temperature of 220 °C, pressure of 50 bars and flow rate of 2 mL min−1 to thoroughly wash-off the respective templates from their MIPs. The EE evaluated for PHWE was over 99.6% for all the MIPs with no subsequent or minimal template bleeding (more than 0.01%). The washing procedure was simple and relatively fast as it was achieved in 70 min at the most. At 95% confidence level (n = 3), soxhlet and ultrasonic recorded EE that was not significantly different (more than 94.5% in all cases) from that of PHWE (less than 99.6% in all cases). Soxhlet and ultrasonic had washing procedures that were slower (over 18 h) and employed large quantities (400 mL) of organic solvents modified with acids. The percentage relative standard deviations (%RSD) for the EE and recovery results were less than 2.3% in all cases indicating the high reproducibility of the method. Overall, the three methods performed comparably in extracting templates. PHWE seems to be the method of choice as it employed water which poses no environmental threat.
- Full Text:
- Date Issued: 2011
Synthesis and photophysical studies of monocarboxy phthalocyanines containing quaternizable groups
- Arslanoğlu, Yasin, Nyokong, Tebello
- Authors: Arslanoğlu, Yasin , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246992 , vital:51535 , xlink:href="https://doi.org/10.1016/j.poly.2011.08.009"
- Description: This work reports on the synthesis and photophysical properties of novel unsymmetrically substituted monocarboxy magnesium (MgPc, 3), aluminum (ClAlPc, 4) and unmetallated (H2Pc, 5) phthalocyanines. Magnesium phthalocyanine (3) was converted into water soluble quaternized derivative (QMgPc, 6) by reaction with methyl iodide. The synthesized phthalocyanines were characterized by IR, UV–Vis, NMR, mass spectrometry and elemental analyses. Photophysical and photochemical studies were carried out in order to determine the potential of the complexes as photosensitizers for use in photodynamic therapy. Triplet quantum yields ranged from 0.37 to 0.40 and triplet lifetimes from 110 to 140 μs in DMSO.
- Full Text:
- Date Issued: 2011
- Authors: Arslanoğlu, Yasin , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246992 , vital:51535 , xlink:href="https://doi.org/10.1016/j.poly.2011.08.009"
- Description: This work reports on the synthesis and photophysical properties of novel unsymmetrically substituted monocarboxy magnesium (MgPc, 3), aluminum (ClAlPc, 4) and unmetallated (H2Pc, 5) phthalocyanines. Magnesium phthalocyanine (3) was converted into water soluble quaternized derivative (QMgPc, 6) by reaction with methyl iodide. The synthesized phthalocyanines were characterized by IR, UV–Vis, NMR, mass spectrometry and elemental analyses. Photophysical and photochemical studies were carried out in order to determine the potential of the complexes as photosensitizers for use in photodynamic therapy. Triplet quantum yields ranged from 0.37 to 0.40 and triplet lifetimes from 110 to 140 μs in DMSO.
- Full Text:
- Date Issued: 2011
Formation, surface characterization, and electrocatalytic application of self-assembled monolayer films of tetra-substituted manganese, iron, and cobalt benzylthio phthalocyanine complexes
- Akinbulu, Isaac Adebayo, Ozoemena, Kenneth Iyke, Nyokong, Tebello
- Authors: Akinbulu, Isaac Adebayo , Ozoemena, Kenneth Iyke , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247163 , vital:51552 , xlink:href="https://doi.org/10.1007/s10008-010-1243-1"
- Description: Molecular thin films of manganese (SAM-2), iron (SAM-3), and cobalt (SAM-4) phthalocyanine complexes, non-peripherally tetra-substituted with benzylmercapto, were formed on polycrystalline gold disc electrode by self-assembly technique. Surface characteristics of the films were interrogated by cyclic voltammetry. Significant passivation of voltammetry processes associated with bare gold surface (gold oxidation and underpotential deposition of copper) confirmed formation of the films. Electrocatalytic property of the films was evidenced from better voltammetry responses (less positive oxidation potential and better current signal) of the insecticide, carbofuran, on these films, relative to that on bare gold electrode. In terms of less positive oxidation potential, the FePc derivative (3) gave the best response, while the best current signal was observed on SAM-2-modified gold electrode. The average heterogeneous rate constant, k, for the oxidation of carbofuran was 3.6 × 10−2 cm s−1 on the SAM film with the best current signal (SAM-2).
- Full Text:
- Date Issued: 2011
- Authors: Akinbulu, Isaac Adebayo , Ozoemena, Kenneth Iyke , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247163 , vital:51552 , xlink:href="https://doi.org/10.1007/s10008-010-1243-1"
- Description: Molecular thin films of manganese (SAM-2), iron (SAM-3), and cobalt (SAM-4) phthalocyanine complexes, non-peripherally tetra-substituted with benzylmercapto, were formed on polycrystalline gold disc electrode by self-assembly technique. Surface characteristics of the films were interrogated by cyclic voltammetry. Significant passivation of voltammetry processes associated with bare gold surface (gold oxidation and underpotential deposition of copper) confirmed formation of the films. Electrocatalytic property of the films was evidenced from better voltammetry responses (less positive oxidation potential and better current signal) of the insecticide, carbofuran, on these films, relative to that on bare gold electrode. In terms of less positive oxidation potential, the FePc derivative (3) gave the best response, while the best current signal was observed on SAM-2-modified gold electrode. The average heterogeneous rate constant, k, for the oxidation of carbofuran was 3.6 × 10−2 cm s−1 on the SAM film with the best current signal (SAM-2).
- Full Text:
- Date Issued: 2011