Photophysical and photochemical properties of a novel thiol terminated low symmetry zinc phthalocyanine complex and its gold nanoparticles conjugate
- Mthethwa, Thandekile P., Tuncel, Sinem, Durmuş, Mahmut, Nyokong, Tebello
- Authors: Mthethwa, Thandekile P. , Tuncel, Sinem , Durmuş, Mahmut , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7329 , http://hdl.handle.net/10962/d1020590
- Description: A novel thiol functionalized zinc phthalocyanine complex (ZnPcSH) is reported in this work. This complex was conjugated to gold nanoparticles. The photophysical and photochemical properties of the complex and the conjugate were investigated. Upon conjugation a blue shift was observed from the UV-Vis spectra. The conjugate showed a decrease in the fluorescence quantum yield and lifetime. An increase in the triplet quantum yield and lifetime was observed for ZnPcSH following conjugation to gold nanoparticles. Both ZnPcSH and its conjugate with gold nanoparticles showed high singlet oxygen quantum yields with the conjugate being higher than the Pc alone. , Original publication is available at http://dx.doi.org/10.1039/C3DT32698E
- Full Text:
- Authors: Mthethwa, Thandekile P. , Tuncel, Sinem , Durmuş, Mahmut , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7329 , http://hdl.handle.net/10962/d1020590
- Description: A novel thiol functionalized zinc phthalocyanine complex (ZnPcSH) is reported in this work. This complex was conjugated to gold nanoparticles. The photophysical and photochemical properties of the complex and the conjugate were investigated. Upon conjugation a blue shift was observed from the UV-Vis spectra. The conjugate showed a decrease in the fluorescence quantum yield and lifetime. An increase in the triplet quantum yield and lifetime was observed for ZnPcSH following conjugation to gold nanoparticles. Both ZnPcSH and its conjugate with gold nanoparticles showed high singlet oxygen quantum yields with the conjugate being higher than the Pc alone. , Original publication is available at http://dx.doi.org/10.1039/C3DT32698E
- Full Text:
Physicochemical properties of a zinc phthalocyanine – pyrene conjugate adsorbed onto single walled carbon nanotubes
- Ogbodu, Racheal O, Antunes, Edith M, Nyokong, Tebello
- Authors: Ogbodu, Racheal O , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7328 , http://hdl.handle.net/10962/d1020589
- Description: A conjugate between zinc monoamino phthalocyanine (ZnMAPc) and pyrene (Py) represented as ZnMAPc–Py (complex 3) was synthesized and characterized by various spectroscopic techniques and by elemental analysis. This manuscript also reports on the photochemical and photophysical properties of 3. This new compound exhibited higher triplet, fluorescence and singlet oxygen quantum yields in comparison to the phthalocyanine alone, hence showing the advantages of attaching pyrene to the Pc without breaking the conjugation. We also observed a decrease in photophysical parameters upon adsorbing the ZnMAPc–Py complex onto single walled carbon nanotubes (SWCNT). However, ZnMAPc–Py still generated some singlet oxygen when adsorbed onto SWCNT. , Original publication is available at http://dx.doi.org/10.1039/C3DT50335F
- Full Text:
- Authors: Ogbodu, Racheal O , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7328 , http://hdl.handle.net/10962/d1020589
- Description: A conjugate between zinc monoamino phthalocyanine (ZnMAPc) and pyrene (Py) represented as ZnMAPc–Py (complex 3) was synthesized and characterized by various spectroscopic techniques and by elemental analysis. This manuscript also reports on the photochemical and photophysical properties of 3. This new compound exhibited higher triplet, fluorescence and singlet oxygen quantum yields in comparison to the phthalocyanine alone, hence showing the advantages of attaching pyrene to the Pc without breaking the conjugation. We also observed a decrease in photophysical parameters upon adsorbing the ZnMAPc–Py complex onto single walled carbon nanotubes (SWCNT). However, ZnMAPc–Py still generated some singlet oxygen when adsorbed onto SWCNT. , Original publication is available at http://dx.doi.org/10.1039/C3DT50335F
- Full Text:
Surface patterning using scanning electrochemical microscopy to locally trigger a “click” chemistry reaction
- Quinton, Damien, Maringa, Audacity, Griveau, Sophie, Nyokong, Tebello, Bedioui, Fethi
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Language: English
- Type: Article
- Identifier: vital:7331 , http://hdl.handle.net/10962/d1020592
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates. , Original publication is available at http://dx.doi.org/10.1016/j.elecom.2013.03.021
- Full Text: false
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Language: English
- Type: Article
- Identifier: vital:7331 , http://hdl.handle.net/10962/d1020592
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates. , Original publication is available at http://dx.doi.org/10.1016/j.elecom.2013.03.021
- Full Text: false
The development of catalytic oxovanadium(IV)-containing microspheres for the oxidation of various organosulfur compounds
- Ogunlaja, Adeniyi S, Khene, M Samson, Antunes, Edith M, Nyokong, Tebello, Torto, Nelson, Tshentu, Zenixole R
- Authors: Ogunlaja, Adeniyi S , Khene, M Samson , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Language: English
- Type: Article
- Identifier: vital:7324 , http://hdl.handle.net/10962/d1020574
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil. , Original publication is available at http://dx.doi.org/10.1016/j.apcata.2013.05.004
- Full Text: false
- Authors: Ogunlaja, Adeniyi S , Khene, M Samson , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Language: English
- Type: Article
- Identifier: vital:7324 , http://hdl.handle.net/10962/d1020574
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil. , Original publication is available at http://dx.doi.org/10.1016/j.apcata.2013.05.004
- Full Text: false
The use of phthalocyanines in cancer therapy
- Nyokong, Tebello, Gledhill, Igle
- Authors: Nyokong, Tebello , Gledhill, Igle
- Language: English
- Type: Article
- Identifier: vital:7323 , http://hdl.handle.net/10962/d1020572
- Description: Phthalocyanines are synthetic analogues of porphyrins employed as photosensitizers in cancer therapy. We present the history of photodynamic therapy and developments in the use of phthalocyanines as photosensitizers. New efforts in the development of more cancer-specific phthalocyanines are presented. The combination of phthalocyanines with nanoparticles for "combination therapy" of cancer is also discussed. The nanoparticles employed are quantum dots, gold, and magnetic nanoparticles. , Original publication is available at http://dx.doi.org/10.10631.4794220
- Full Text: false
- Authors: Nyokong, Tebello , Gledhill, Igle
- Language: English
- Type: Article
- Identifier: vital:7323 , http://hdl.handle.net/10962/d1020572
- Description: Phthalocyanines are synthetic analogues of porphyrins employed as photosensitizers in cancer therapy. We present the history of photodynamic therapy and developments in the use of phthalocyanines as photosensitizers. New efforts in the development of more cancer-specific phthalocyanines are presented. The combination of phthalocyanines with nanoparticles for "combination therapy" of cancer is also discussed. The nanoparticles employed are quantum dots, gold, and magnetic nanoparticles. , Original publication is available at http://dx.doi.org/10.10631.4794220
- Full Text: false
Ultrafast Photodynamics of the Indoline Dye D149 Adsorbed to Porous ZnO in Dye-Sensitized Solar Cells
- Rohwer, Egmont, Richter, Christoph, Heming, Nadine, Strauch, Kerstin, Litwinski, Christian, Nyokong, Tebello, Schlettwein, Derck, Schwoerer, Heinrich
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Language: English
- Type: Article
- Identifier: vital:7326 , http://hdl.handle.net/10962/d1020576
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns. , Original publication is available at http://dx.doi.org/10.1002/cphc.201200715
- Full Text: false
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Language: English
- Type: Article
- Identifier: vital:7326 , http://hdl.handle.net/10962/d1020576
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns. , Original publication is available at http://dx.doi.org/10.1002/cphc.201200715
- Full Text: false