Thermoluminescence of the main peak in SrAl2O4: Eu2+, Dy3+: spectral and kinetics features of secondary emission detected in the ultra-violet region
- Authors: Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124197 , vital:35575 , https://doi.org/10.1016/j.radmeas.2016.12.001
- Description: We report the thermoluminescence of SrAl2O4:Eu2+,Dy3+ measured in the ultra-violet region of the spectrum between 300 and 400 nm. Complementary measurements of X-ray excited optical luminescence confirm emission bands of stimulated luminescence in this region. As a further test, optically stimulated luminescence was also measured in this region. The glow curve measured at 1 °C s−1 following irradiation to various doses appears simple and single but is in reality a collection of several components. This was shown by results from the Tm-Tstop method on both ends of the peak, application of thermal cleaning beyond the peak maximum as well as the dependence of the peak on fading. The latter shows that new peaks appear as preceding ones fade. Kinetic analysis of some of the main peaks was carried out giving an activation energy of 0.6 eV. The implication of the results on measurement of phosphorescence, interpretation of dose response and fading is discussed.
- Full Text: false
- Date Issued: 2017
- Authors: Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124197 , vital:35575 , https://doi.org/10.1016/j.radmeas.2016.12.001
- Description: We report the thermoluminescence of SrAl2O4:Eu2+,Dy3+ measured in the ultra-violet region of the spectrum between 300 and 400 nm. Complementary measurements of X-ray excited optical luminescence confirm emission bands of stimulated luminescence in this region. As a further test, optically stimulated luminescence was also measured in this region. The glow curve measured at 1 °C s−1 following irradiation to various doses appears simple and single but is in reality a collection of several components. This was shown by results from the Tm-Tstop method on both ends of the peak, application of thermal cleaning beyond the peak maximum as well as the dependence of the peak on fading. The latter shows that new peaks appear as preceding ones fade. Kinetic analysis of some of the main peaks was carried out giving an activation energy of 0.6 eV. The implication of the results on measurement of phosphorescence, interpretation of dose response and fading is discussed.
- Full Text: false
- Date Issued: 2017
Thermoluminescence of α-Al2O3: C, Mg: kinetic analysis of the main glow peak
- Kalita, Jitumani M, Chithambo, Makaiko L
- Authors: Kalita, Jitumani M , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/119844 , vital:34788 , https://doi.org/10.1016/j.jlumin.2016.10.031
- Description: The kinetic analysis of the thermoluminescence of aluminium oxide doped with carbon and co-doped with magnesium (α-Al2O3:C,Mg) is reported. Measurements were made at 1 °C/s following beta irradiation to 1 Gy. The glow curve consists of a dominant peak at a peak-maximum Tm of 161 °C and six secondary peaks of weaker intensity at 42, 72, 193, 279, 330 and 370 °C. Kinetic analysis of the main peak, the subject of this report, was carried out using initial rise, whole glow peak, peak shape, curve fitting and variable heating rate methods. The order of kinetics of the main peak was determined as first order using various methods including the Tm–Tstop technique and the dependence of Tm on irradiation dose. The activation energy of the peak is about ~1.36 eV and the frequency factor of the order of 1014 s−1. The peak area changes with heating rate in a manner that shows that the peak is affected by thermal quenching. The activation energy of thermal quenching was evaluated as 0.99±0.08 eV. A comparison of analytical results from the main peak before and after correction for thermal quenching show that the kinetic parameters of the main peak are not that affected by thermal quenching.
- Full Text: false
- Date Issued: 2017
- Authors: Kalita, Jitumani M , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/119844 , vital:34788 , https://doi.org/10.1016/j.jlumin.2016.10.031
- Description: The kinetic analysis of the thermoluminescence of aluminium oxide doped with carbon and co-doped with magnesium (α-Al2O3:C,Mg) is reported. Measurements were made at 1 °C/s following beta irradiation to 1 Gy. The glow curve consists of a dominant peak at a peak-maximum Tm of 161 °C and six secondary peaks of weaker intensity at 42, 72, 193, 279, 330 and 370 °C. Kinetic analysis of the main peak, the subject of this report, was carried out using initial rise, whole glow peak, peak shape, curve fitting and variable heating rate methods. The order of kinetics of the main peak was determined as first order using various methods including the Tm–Tstop technique and the dependence of Tm on irradiation dose. The activation energy of the peak is about ~1.36 eV and the frequency factor of the order of 1014 s−1. The peak area changes with heating rate in a manner that shows that the peak is affected by thermal quenching. The activation energy of thermal quenching was evaluated as 0.99±0.08 eV. A comparison of analytical results from the main peak before and after correction for thermal quenching show that the kinetic parameters of the main peak are not that affected by thermal quenching.
- Full Text: false
- Date Issued: 2017
Influence of argon-implantation on conventional and phototransferred thermoluminescence of synthetic quartz
- Nsengiyumva, S, Chithambo, Makaiko L, Pichon, L
- Authors: Nsengiyumva, S , Chithambo, Makaiko L , Pichon, L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124732 , vital:35656 , DOI: 10.1080/10420150.2016.1194412
- Description: Conventional and phototransferred thermoluminescence of crystalline synthetic quartz implanted with 70 keV Ar ions at fluences in the range 1 × 1014–5 × 1015 ions/cm2 is reported. The glow curves, recorded at 5°C/s from beta-irradiated samples of similar mass, show a prominent peak between 100°C and 120°C. The thermoluminescence intensity of all implanted samples was greater than that of the unimplanted one. The increase in sensitivity is attributed to a corresponding increase in the concentration of point defects, as a result of the implantation, which act as electron traps or recombination centres. Kinetic analysis carried out using the peak shape, whole glow-peak and curve-fitting methods produced values of the activation energy, frequency factor and order of kinetics that are generally independent of implantation fluence. This result suggests that implantation did not necessarily affect the nature of the electron traps. With respect to phototransferred thermoluminescence, it was observed that it only appeared in the sample implanted at the highest fluence of 5 × 1015 ions/cm2. This may be so because the concentration of deep traps produced as a result of implantation at low fluence is too low to give rise to phototransferred thermoluminescence. The intensity of the phototransferred thermoluminescence goes through a peak with illumination time. We attribute this behaviour to the relative concentration of holes at recombination centres and phototransferred electrons at shallow traps.
- Full Text: false
- Date Issued: 2016
- Authors: Nsengiyumva, S , Chithambo, Makaiko L , Pichon, L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124732 , vital:35656 , DOI: 10.1080/10420150.2016.1194412
- Description: Conventional and phototransferred thermoluminescence of crystalline synthetic quartz implanted with 70 keV Ar ions at fluences in the range 1 × 1014–5 × 1015 ions/cm2 is reported. The glow curves, recorded at 5°C/s from beta-irradiated samples of similar mass, show a prominent peak between 100°C and 120°C. The thermoluminescence intensity of all implanted samples was greater than that of the unimplanted one. The increase in sensitivity is attributed to a corresponding increase in the concentration of point defects, as a result of the implantation, which act as electron traps or recombination centres. Kinetic analysis carried out using the peak shape, whole glow-peak and curve-fitting methods produced values of the activation energy, frequency factor and order of kinetics that are generally independent of implantation fluence. This result suggests that implantation did not necessarily affect the nature of the electron traps. With respect to phototransferred thermoluminescence, it was observed that it only appeared in the sample implanted at the highest fluence of 5 × 1015 ions/cm2. This may be so because the concentration of deep traps produced as a result of implantation at low fluence is too low to give rise to phototransferred thermoluminescence. The intensity of the phototransferred thermoluminescence goes through a peak with illumination time. We attribute this behaviour to the relative concentration of holes at recombination centres and phototransferred electrons at shallow traps.
- Full Text: false
- Date Issued: 2016
On luminescence stimulated from deep traps using thermally-assisted time-resolved optical stimulation in α-Al2O3: C
- Nyirenda, Angel N, Chithambo, Makaiko L, Polymeris, G S
- Authors: Nyirenda, Angel N , Chithambo, Makaiko L , Polymeris, G S
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124627 , vital:35639 , https://doi.org/10.1016/j.radmeas.2016.01.016
- Description: We report a study of charge transfer mechanisms of electrons stimulated optically from very deep traps, also known as donor traps, in α-Al2O3:C. The investigations were carried out using thermally-assisted time-resolved optical stimulation, thermoluminescence and by way of residual thermoluminescence from the main electron trap. When the charges are optically stimulated from the deep traps, they are redistributed via the conduction band to the main electron trap and the shallow trap from where they are optically or thermally released for recombination at luminescence centres. The luminescence is strongly quenched at high measurement temperature as evident by very short luminescence lifetimes at these temperatures. The main peak due to residual thermoluminescence is located at a higher temperature than the conventional main peak.
- Full Text: false
- Date Issued: 2016
- Authors: Nyirenda, Angel N , Chithambo, Makaiko L , Polymeris, G S
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124627 , vital:35639 , https://doi.org/10.1016/j.radmeas.2016.01.016
- Description: We report a study of charge transfer mechanisms of electrons stimulated optically from very deep traps, also known as donor traps, in α-Al2O3:C. The investigations were carried out using thermally-assisted time-resolved optical stimulation, thermoluminescence and by way of residual thermoluminescence from the main electron trap. When the charges are optically stimulated from the deep traps, they are redistributed via the conduction band to the main electron trap and the shallow trap from where they are optically or thermally released for recombination at luminescence centres. The luminescence is strongly quenched at high measurement temperature as evident by very short luminescence lifetimes at these temperatures. The main peak due to residual thermoluminescence is located at a higher temperature than the conventional main peak.
- Full Text: false
- Date Issued: 2016
Quantitative analysis of time-resolved infrared stimulated luminescence in feldspars
- Pagonis, Vasilis, Ankjærgaard, Christina, Jain, Mayank, Chithambo, Makaiko L
- Authors: Pagonis, Vasilis , Ankjærgaard, Christina , Jain, Mayank , Chithambo, Makaiko L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124616 , vital:35638 , DOI: 10.1016/j.physb.2016.06.013
- Description: Time-resolved infrared-stimulated luminescence (TR-IRSL) from feldspar samples is of importance in the field of luminescence dating, since it provides information on the luminescence mechanism in these materials. In this paper we present new analytical equations which can be used to analyze TR-IRSL signals, both during and after short infrared stimulation pulses. The equations are developed using a recently proposed kinetic model, which describes localized electronic recombination via tunneling between trapped electrons and recombination centers in luminescent materials. Recombination is assumed to take place from the excited state of the trapped electron to the nearest-neighbor center within a random distribution of luminescence recombination centers. Different possibilities are examined within the model, depending on the relative importance of electron de-excitation and recombination. The equations are applied to experimental TR-IRSL data of natural feldspars, and good agreement is found between experimental and modeling results.
- Full Text:
- Date Issued: 2016
- Authors: Pagonis, Vasilis , Ankjærgaard, Christina , Jain, Mayank , Chithambo, Makaiko L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124616 , vital:35638 , DOI: 10.1016/j.physb.2016.06.013
- Description: Time-resolved infrared-stimulated luminescence (TR-IRSL) from feldspar samples is of importance in the field of luminescence dating, since it provides information on the luminescence mechanism in these materials. In this paper we present new analytical equations which can be used to analyze TR-IRSL signals, both during and after short infrared stimulation pulses. The equations are developed using a recently proposed kinetic model, which describes localized electronic recombination via tunneling between trapped electrons and recombination centers in luminescent materials. Recombination is assumed to take place from the excited state of the trapped electron to the nearest-neighbor center within a random distribution of luminescence recombination centers. Different possibilities are examined within the model, depending on the relative importance of electron de-excitation and recombination. The equations are applied to experimental TR-IRSL data of natural feldspars, and good agreement is found between experimental and modeling results.
- Full Text:
- Date Issued: 2016
Thermoluminescence of kunzite: a study of kinetic processes and dosimetry characteristics
- Ogundare, F O, Alatishe, M A, Chithambo, Makaiko L, Costin, G
- Authors: Ogundare, F O , Alatishe, M A , Chithambo, Makaiko L , Costin, G
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124701 , vital:35650 , https://doi.org/10.1016/j.nimb.2016.02.059
- Description: Since the use of natural minerals for dating and dose reconstruction using luminescence techniques is well-established and always of interest, we present thermoluminescence characteristics of kunzite, a gem variety of spodumene. The chemical composition of the sample was determined using an Electron Probe MicroAnalyzer.
- Full Text: false
- Date Issued: 2016
- Authors: Ogundare, F O , Alatishe, M A , Chithambo, Makaiko L , Costin, G
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124701 , vital:35650 , https://doi.org/10.1016/j.nimb.2016.02.059
- Description: Since the use of natural minerals for dating and dose reconstruction using luminescence techniques is well-established and always of interest, we present thermoluminescence characteristics of kunzite, a gem variety of spodumene. The chemical composition of the sample was determined using an Electron Probe MicroAnalyzer.
- Full Text: false
- Date Issued: 2016
Time-resolved luminescence from quartz: an overview of contemporary developments and applications
- Chithambo, Makaiko L, Pagonis, Vasilis, Ankjærgaard, Christina
- Authors: Chithambo, Makaiko L , Pagonis, Vasilis , Ankjærgaard, Christina
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124743 , vital:35658 , https://doi.org/10.1016/j.physb.2015.10.014
- Description: Time-resolved optical stimulation of luminescence has become established as a key method for measurement of optically stimulated luminescence from quartz, feldspar and α-Al2O3:C, all materials of interest in dosimetry. The aim of time-resolved optical stimulation is to separate in time the stimulation and emission of luminescence. The luminescence is stimulated from a sample using a brief light pulse and the emission monitored during stimulation in the presence of scattered stimulating light or after pulsing, over photomultiplier noise only. Although the use of the method in retrospective dosimetry has been somewhat limited, the technique has been successfully applied to study mechanisms in the processes leading up to luminescence emission. The main means for this has been the temperature dependence of the luminescence intensity as well as the luminescence lifetimes determined from time-resolved luminescence spectra. In this paper we review some key developments in theory and applications to quartz including methods of evaluating lifetimes, techniques of evaluating kinetic parameters using both the dependence of luminescence intensity and lifetime on measurement temperature, and of lifetimes on annealing temperature. We then provide an overview of some notable applications such as separation of quartz signals from a quartz–feldspar admixture and the utility of the dynamic throughput, a measure of luminescence measured as a function of the pulse width. The paper concludes with some suggestions of areas where further exploration would advance understanding of dynamics of luminescence in quartz and help address some outstanding problems in its application.
- Full Text: false
- Date Issued: 2016
- Authors: Chithambo, Makaiko L , Pagonis, Vasilis , Ankjærgaard, Christina
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124743 , vital:35658 , https://doi.org/10.1016/j.physb.2015.10.014
- Description: Time-resolved optical stimulation of luminescence has become established as a key method for measurement of optically stimulated luminescence from quartz, feldspar and α-Al2O3:C, all materials of interest in dosimetry. The aim of time-resolved optical stimulation is to separate in time the stimulation and emission of luminescence. The luminescence is stimulated from a sample using a brief light pulse and the emission monitored during stimulation in the presence of scattered stimulating light or after pulsing, over photomultiplier noise only. Although the use of the method in retrospective dosimetry has been somewhat limited, the technique has been successfully applied to study mechanisms in the processes leading up to luminescence emission. The main means for this has been the temperature dependence of the luminescence intensity as well as the luminescence lifetimes determined from time-resolved luminescence spectra. In this paper we review some key developments in theory and applications to quartz including methods of evaluating lifetimes, techniques of evaluating kinetic parameters using both the dependence of luminescence intensity and lifetime on measurement temperature, and of lifetimes on annealing temperature. We then provide an overview of some notable applications such as separation of quartz signals from a quartz–feldspar admixture and the utility of the dynamic throughput, a measure of luminescence measured as a function of the pulse width. The paper concludes with some suggestions of areas where further exploration would advance understanding of dynamics of luminescence in quartz and help address some outstanding problems in its application.
- Full Text: false
- Date Issued: 2016
Phosphorescence of orthopaedic–grade ultra high molecular weight polyethylene
- Authors: Chithambo, Makaiko L
- Date: 2008
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125617 , vital:35801 , https://doi.10.1002/pssc.200776802
- Description: Isothermal luminescence decay curves have been measured from orthopaedic–standard ultra high molecular weight polyethylene between 35 and 70 ˚C on the rising edge of the main glow peak at 70 ˚C. Preparatory peak-shape analysis of the temperature-resolved glow peak at 70 ˚C measured at 1 ˚C s–1 gave a geometrical factor close to 0.5 suggestive of second order kinetics for both the isothermal and thermally stimulated luminescence. The results of analysis of the phosphorescence of transformed monotonic-to-peak isothermal decay curves are also second order, as is the conclusion from thermoluminescence glow-curve de-convolution. All methods of analysis give an activation energy of about 0.7 eV.
- Full Text:
- Date Issued: 2008
- Authors: Chithambo, Makaiko L
- Date: 2008
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125617 , vital:35801 , https://doi.10.1002/pssc.200776802
- Description: Isothermal luminescence decay curves have been measured from orthopaedic–standard ultra high molecular weight polyethylene between 35 and 70 ˚C on the rising edge of the main glow peak at 70 ˚C. Preparatory peak-shape analysis of the temperature-resolved glow peak at 70 ˚C measured at 1 ˚C s–1 gave a geometrical factor close to 0.5 suggestive of second order kinetics for both the isothermal and thermally stimulated luminescence. The results of analysis of the phosphorescence of transformed monotonic-to-peak isothermal decay curves are also second order, as is the conclusion from thermoluminescence glow-curve de-convolution. All methods of analysis give an activation energy of about 0.7 eV.
- Full Text:
- Date Issued: 2008
Time-resolved luminescence of low sensitivity quartz from crystalline rocks
- Chithambo, Makaiko L, Preusser, F, Ramseyer, K, Ogundare, F O
- Authors: Chithambo, Makaiko L , Preusser, F , Ramseyer, K , Ogundare, F O
- Date: 2007
- Language: English
- Type: text , article
- Identifier: vital:6801 , http://hdl.handle.net/10962/d1004164 , https://doi.org/10.1016/j.radmeas.2006.07.005
- Description: preprint , Time-resolved luminescence spectra of low sensitivity natural quartz from crystalline rocks are presented. The luminescence was pulse-stimulated at width using 470 nm blue light from quartz separated from plutonic, metamorphic, volcanic and hydrothermal samples. Measurements were made at 20 °C. All samples show evidence of a short lifetime component less than long although in several cases too weak in intensity to be evaluated accurately. On the other hand, the value of the principal lifetime component varies considerably being about in metamorphic quartz, in plutonic quartz, and in one example of hydrothermal quartz. The results illustrate a new feature of luminescence from quartz for which lifetimes less than or greater than have never been reported at room temperature before. It is argued that the thermal provenance of the quartz and so the annealing it will have experienced influences the size of the observed lifetime. In particular, the results are explained in terms of a model consisting of three luminescence centers with the dominant lifetime linked to preferential recombination at one center depending on the thermal history of the sample and hence the hole concentration of the center.
- Full Text:
- Date Issued: 2007
- Authors: Chithambo, Makaiko L , Preusser, F , Ramseyer, K , Ogundare, F O
- Date: 2007
- Language: English
- Type: text , article
- Identifier: vital:6801 , http://hdl.handle.net/10962/d1004164 , https://doi.org/10.1016/j.radmeas.2006.07.005
- Description: preprint , Time-resolved luminescence spectra of low sensitivity natural quartz from crystalline rocks are presented. The luminescence was pulse-stimulated at width using 470 nm blue light from quartz separated from plutonic, metamorphic, volcanic and hydrothermal samples. Measurements were made at 20 °C. All samples show evidence of a short lifetime component less than long although in several cases too weak in intensity to be evaluated accurately. On the other hand, the value of the principal lifetime component varies considerably being about in metamorphic quartz, in plutonic quartz, and in one example of hydrothermal quartz. The results illustrate a new feature of luminescence from quartz for which lifetimes less than or greater than have never been reported at room temperature before. It is argued that the thermal provenance of the quartz and so the annealing it will have experienced influences the size of the observed lifetime. In particular, the results are explained in terms of a model consisting of three luminescence centers with the dominant lifetime linked to preferential recombination at one center depending on the thermal history of the sample and hence the hole concentration of the center.
- Full Text:
- Date Issued: 2007
Accuracy of the activation energy calculated from a thermoluminescence glow‐peak using a method that uses three points on the peak
- Ogundare, F O, Chithambo, Makaiko L
- Authors: Ogundare, F O , Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123016 , vital:35397 , https://doi:10.1002/pssc.200521077
- Description: The utility of thermoluminescence (TL) in detecting changes in defect concentration in insulators is well established [1–3]. The underlying premise leading to the emission of TL is that exposure of a material to ionizing radiation causes a redistribution of charge in defect centres within the material. When the material is heated at a controlled linear rate, the thermoluminescence is emitted as a temperature-dependent set of peaks collectively known as a glow-curve. The shape and intensity of each of the glow-peaks may be characterized by a set of parameters consisting of the activation energy E, the frequency factors, the number of electrons n0 trapped in defect centres at the start of the heating, and the order of kinetics b. The order of kinetics b is an indication of the retrapping probability i.e. the probability that a free electron from the conduction band will be retrapped rather than recombine with a hole at a recombination centre to produce thermoluminescence. Retrapping of electrons reduces the TL intensity at any particular temperature during the heating process. The physical mechanisms of TL associated with a given glow curve are unique and may be characterized by analysis of the glow-curve for the said kinetic parameters.
- Full Text:
- Date Issued: 2006
- Authors: Ogundare, F O , Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123016 , vital:35397 , https://doi:10.1002/pssc.200521077
- Description: The utility of thermoluminescence (TL) in detecting changes in defect concentration in insulators is well established [1–3]. The underlying premise leading to the emission of TL is that exposure of a material to ionizing radiation causes a redistribution of charge in defect centres within the material. When the material is heated at a controlled linear rate, the thermoluminescence is emitted as a temperature-dependent set of peaks collectively known as a glow-curve. The shape and intensity of each of the glow-peaks may be characterized by a set of parameters consisting of the activation energy E, the frequency factors, the number of electrons n0 trapped in defect centres at the start of the heating, and the order of kinetics b. The order of kinetics b is an indication of the retrapping probability i.e. the probability that a free electron from the conduction band will be retrapped rather than recombine with a hole at a recombination centre to produce thermoluminescence. Retrapping of electrons reduces the TL intensity at any particular temperature during the heating process. The physical mechanisms of TL associated with a given glow curve are unique and may be characterized by analysis of the glow-curve for the said kinetic parameters.
- Full Text:
- Date Issued: 2006
Orthopaedic grade ultra–high molecular weight polyethylene: some features of the main thermoluminescence glow curve
- Authors: Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125499 , vital:35789 , https://doi.10.1093/rpd/nci661
- Description: Thermoluminescence (TL) characteristics of orthopaedic–grade ultra–high molecular weight polyethylene have been investigated between 20 and 200_C. The TL at 1_C s_1 consists of two glow curves, a weaker intensity peak at 115_C and the main peak at 70_C, studied in this work. TL intensity increases with beta irradiation but with a dose–response influenced by heating rate. On the other hand, the peak maximum is affected by both irradiation and repeated use of a sample. The glow curve shifts to higher temperatures with increase in heating rate but only slightly so with change in beta irradiation dose, properties suggestive of first-order kinetics. Kinetic analysis for activation energy and order of kinetics, based on the discrete trap model, produce somewhat conflicting results. Whereas qualitative analysis of peak symmetry show that first-order kinetics apply, geometrical analysis of the peak shape suggests that the order of kinetics might be other than first-order. Values of activation energy evaluated using the initial rise method were found to be dose dependent and for a given beta dose are in agreement with calculations from peak shape and initial rise methods but less so with results from variable heating rate method.
- Full Text:
- Date Issued: 2006
- Authors: Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125499 , vital:35789 , https://doi.10.1093/rpd/nci661
- Description: Thermoluminescence (TL) characteristics of orthopaedic–grade ultra–high molecular weight polyethylene have been investigated between 20 and 200_C. The TL at 1_C s_1 consists of two glow curves, a weaker intensity peak at 115_C and the main peak at 70_C, studied in this work. TL intensity increases with beta irradiation but with a dose–response influenced by heating rate. On the other hand, the peak maximum is affected by both irradiation and repeated use of a sample. The glow curve shifts to higher temperatures with increase in heating rate but only slightly so with change in beta irradiation dose, properties suggestive of first-order kinetics. Kinetic analysis for activation energy and order of kinetics, based on the discrete trap model, produce somewhat conflicting results. Whereas qualitative analysis of peak symmetry show that first-order kinetics apply, geometrical analysis of the peak shape suggests that the order of kinetics might be other than first-order. Values of activation energy evaluated using the initial rise method were found to be dose dependent and for a given beta dose are in agreement with calculations from peak shape and initial rise methods but less so with results from variable heating rate method.
- Full Text:
- Date Issued: 2006