Tetra 4-(propargyloxy)phenoxy phthalocyanines: synthesis, spectroscopic, nonlinear optical and electrocatalytic properties
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Investigating the expression of three small open reading frames encoded on Helicoverpa armigera stunt virus RNA 1
- Authors: De Bruyn, Mart-Mari
- Date: 2017
- Subjects: Helicoverpa armigera , RNA viruses , Insects Viruses , Proteins
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59168 , vital:27448
- Description: The Helicoverpa armigera stunt virus (HaSV), belonging to the Family Alphatetraviridae (Genus: Omegatetravirus), is a non-enveloped insect virus encapsidating a bi-partite, positive-sense single-stranded RNA genome. RNA1 encodes the replicase, as well as three small open reading frames (ORFs) arranged in tandem, and overlapping with the 3’ end of the replicase ORF. These ORFs, designated p11, p15 and p8, encode putative proteins of unknown function. The p11 and p15 ORFs are conserved in the genome of the related Omegatetravirus, Dendrolimus punctatus tetravirus. In HaSV, the stop codon of p11 is followed immediately by the start of p15, whereas the stop of p15 and start of p8 are separated by a glycine intercodon. Furthermore, only p11 is known to have a recognizable Kozak sequence. The aim of this study was to determine the expression and function of these three small proteins in the HaSV infectious lifecycle. The authenticity of the viral cDNA sequence, encoding the three small ORFs, was validated by sequencing multiple cDNA clones of the relevant region in viral RNA (vRNA), purified from infectious HaSV particles. The sequence of all three ORFs was conserved in seven cDNA clones, while point mutations were observed in each of two remaining cDNA clones, suggesting that the ORFs were conserved in infectious virus. Polyclonal antisera were raised against a p11 peptide, and a recombinant p15-p8 fusion protein (p23) expressed and purified from Escherichia coli. The affinity of the anti-p23 antiserum was confirmed by western blot analysis, while that of the anti-p11 antiserum was confirmed using immunofluorescence microscopy, as attempted expression of recombinant p11 in E. coli appeared to be toxic. The antisera were used to detect expression of the small proteins in HaSV-infected H. armigera larvae by western blot analysis. A band migrating at approximately 34 kDa was detected by both antisera in infected larvae, absent in uninfected larvae, suggesting the expression of a p11-p15-p8 polyprotein. Protein bands of 11 kDa and 8 kDa were also detected by the anti-p11 and anti-p23 antisera, respectively. Bioinformatic analysis revealed that the polyprotein would be produced by a novel type of stop codon read-through, however the mechanism required for individual expression could not be definitively determined. The mechanism by which these ORFs are translated was further investigated by expressing p11-p15, tagged with FLAG and enhanced green flourescent protein (EGFP) at its amino- and carboxyl-termini respectively (FLAG-p11-p15-EGFP), in Spodoptera frugiperda (Sf9) cells detected by flourescence microscopy. Punctate structures were observed throughout the cytoplasm that were also detected with antiFLAG, anti-p11 and anti-p23 antisera, complementing results obtained in previous studies. Since p15 does not exhibit a strong recognizable Kozak like p11, the dependency of p15 expression on that of p11 was investigated by mutating this construct such that p15 occurred in a +1 frame to p11. Both EGFP and anti-p23 fluorescence was detected with the same cytoplasmic distribution as the unmutated construct, whereas nothing was detected by anti-FLAG and anti-p11. Preliminary results therefore suggested p15 may also be expressed as a discrete protein, independent of p11. , Thesis (MSc) -- Faculty of Science, Biochemistry and Microbiology, 2018
- Full Text:
- Date Issued: 2017
The creation and validation of aptamers binding to murine 3T3-L1 Preadipocytes: preliminary implications for controlled cellular attachment, differentiation and cell fate
- Authors: Rubidge, Mark Lourens
- Date: 2017
- Subjects: Oligonucleotides , Fat cells , Stem cells , Ligand binding (Biochemistry) , Fluorimetry
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65247 , vital:28714
- Description: The controlled seeding of a variety of stem cells in vitro has been reported to alter the patterns of their subsequent differentiation. This has been attributed to the control of the surface microenvironment onto which adherent stem cells are cultured, especially control of the proximal density of neighbouring cells. Simultaneously, advances in the generation of aptamers - synthetic ligand molecules developed using in vitro selection techniques targeting complex molecules - have aided in the production of molecules capable of selectively binding to a variety of commercial stem cell lines. Combining the aforementioned research fields, the project reported in this thesis aimed to generate DNA-based aptamers capable of assisting with the selective binding of murine 3T3- L1 preadipocytes to a solid surface. This was performed with a view to, eventually, control the seeding densities of the adherent preadipocytes on the surface of the tissue culture dish in subsequent researchers. In the process of meeting this goal, several optimisations of the in vitro process by which aptamers binding to cells are generated (Cell-SELEX) were performed: an analysis into a variety of methods used for the removal of the single stranded aptamer candidate sequences attached to the surface of 3T3-L1 preadipocytes, a comparison of methods for the generation of single-stranded aptamer sequences from double-stranded DNA template molecules and a method for quantifying the removed ssDNA from the cell surface. Their use is further reported in this work. Initially, it was determined that a fluorimetric evaluation of the unbound single stranded DNA was the optimum technique to use to evaluate the relative amounts of aptamer DNA binding to target cells during cell-SELEX; this arose from the release of DNA, and other cell lysate contaminates, which interfered UV/ Vis quantification. The evaluation into different methods of ssDNA removal from the cell surface showed that although trypsinisation of the cells demonstrated the highest level of aptamer detachment (quantified by fluorimetry), there is a decrease the number of potential targets that aptamers could attach to. The most common method for detaching bound DNA aptamer molecules from cellular targets reported in literature, the use of high temperatures, was selected for cell-SELEX to increase the variability in potential target sites on the cell surface. Using techniques optimised in this work, fluorescently-tagged single-stranded oligonucleotide aptamers were later generated with a positive selection pressure to bind to the surface of the 3T3-L1 preadipocytes, but not to their differentiated adipocyte counterparts. After eight cycles of cell-SELEX, fluorescent spectroscopic analysis depicted a 74 % binding retention of the selection pool in the positive preadipocyte selection pool, as opposed to a 0.69 % binding of sequences to the negative differentiated preadipocytes. Following the isolation and identification of candidate sequences, seven separate sequences were identified as being successfully generated from the selection process. Bioinformatic characterisation of these placed sequenced aptamer candidates into two separate families, that were then analysed in opposition to each for their binding affinity toward each other. Using fluorescently-tagged sequences, the binding selectivity of the generated aptamers was validated using both epifluorescent microscopy and confocal microscopy. At this stage, an aptamer sequence selected from prior in-house research to serve as a negative control also demonstrated significant binding to the extracellular matrix of both preadipocytes and mature adipocytes. 5’-thiolated aptamer sequences were used to form self-assembled monolayers on the electrode surfaces of the impedimetric Roche xCELLigence Real-Time Cell Analysis. The use of aptamer sequences to capture the seeded preadipocytes, demonstrated a slight increase in the extent of binding of the preadipocytes to the gold electrode surface and produced some preliminary indications of alterations to the pattern and rate of subsequent differentiation in the preadipocytes. This provides preliminary evidence that aptamers developed to bind specifically to a stem cell line in vitro show potential to be used as to capture said cell when cast in a self- assembled monolayer assembly. This provides a future opportunity to control the seeding densities of the cells in vitro. The effects of cellular differentiation at a set of predefined cellular densities can be demonstrated on a desired stem cell line. , Thesis (MSc) -- Faculty of Faculty of Science, Biotechnology Innovation Centre, 2017
- Full Text:
- Date Issued: 2017
Geological study and economic evaluation of the Paardeplaats Coal Exploration Project
- Authors: Gcayi, Gcobani
- Date: 2017
- Subjects: Coal Geology South Africa Mpumalanga , Coal Prospecting South Africa Mpumalanga , Coal mines and mining South Africa Mpumalanga , Geology, Economic South Africa , Coal reserves South Africa Mpumalanga
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59183 , vital:27452
- Description: For a coal mining company the coal resources are an important asset, and they are acquired in a number of different ways, such as obtaining a prospecting permit from government or an existing permit from another entity and or purchasing an operating colliery from another entity. The Paardeplaats Project is a brownfields project located approximately 7 km south west of the town of Belfast in Mpumalanga Province, South Africa, on the far eastern edge of the Witbank Coalfield. The project is located adjacent to an operating mine, Glisa Colliery, owned by Eyesizwe Coal. Eyesizwe Coal was awarded the prospecting permit in 2006 by the Department of Mineral Resources. Subsequent exploration activities, which included airborne magnetic survey and borehole drilling, were conducted between 2008 and 2010. The results of the drilling confirmed the presence of coal resources, which are classified in the Measured, Indicated and Inferred categories. Mining and beneficiation methods from the adjacent Glisa Colliery, which has similar geology to the project area, were assumed in order to generate a coal reserve statement. The Coal Reserve qualities are suitable to the domestic market, particularly Eskom. South Africa’s coal supply is demand driven, primarily from Eskom for electricity generation followed by the export market and thirdly by Sasol for synthetic fuel generation. The majority of Eskom’s existing coal-fired power stations are located in the Mpumalanga Province, which provides a viable market for coal projects in Mpumalanga when considering existing transport infrastructure and transportation costs. Eskom’s continued demand for coal in the Mpumalanga region, at least until 2040, provides a future market for advanced coal projects in the region. A valuation of the project using the Cash Flow Approach showed the project to be economically viable. , Thesis (MSc) -- Faculty of Faculty of Science, Geology, 2017
- Full Text:
- Date Issued: 2017
Evaluating the potential of monometallic and bimetallic nanomaterials as horseradish peroxidase mimetics
- Authors: Mvango, Sindisiwe
- Date: 2017
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65134 , vital:28694
- Description: This study presents the synthesis of citrate-capped gold nanoparticles (cit-AuNPs), copper oxide nanoparticles (CuONPs), glutathione-capped gold nanoparticles (GSH-AuNPs), 4- aminothiophenol-capped gold nanoparticles (4-ATP-AuNPs), 4-mercapto benzoic acid- capped gold nanoparticles (4-MBA-AuNPs) and copper oxide gold nanoalloys (CuO-Au nanoalloys). Microscopy and spectroscopy techniques were used to confirm the successful synthesis of these nanoparticles. The synthesized nanoparticles were studied their potential applications as horseradish peroxidase (HPR) enzyme mimetics and for the detection of glucose. The cit-AuNPs and GSH-AuNPs exhibited peroxidase-like activity towards hydrogen peroxide (H2O2) with high Michaelis-Menten (Km) values of 61.5 mM and 30.8 mM, respectively. The other nanoparticles, that is, 4-ATP-AuNPs, CuONPs and CuO-Au nanoalloys gave lower Km values of 4.74 mM, 1.92 mM and 4.05 mM, respectively. The obtained Km values were comparable to those of HRP enzymes which ranged from 0.214 - 3.70 mM with 4-ATP-AuNPs and CuO-Au nanoalloys slightly higher. These values were within the reasonable experimental values of the HRP enzyme. The studies showed that the gold nanoparticles had low adsorptive efficiency towards H2O2 compared to the copper-based nanoparticles (CuONPs and CuO-Au nanoalloys). The CuO-Au nanoalloys also showed the synergistic effect between the gold and copper nanoparticles with extended linear concentration range for the quantification of H2O2. The mechanism of catalysis was confirmed using UV-vis spectroscopy and electron paramagnetic resonance (EPR) in that the generation of reactive oxygen species was observed. The use of 1,3-diphenylisobenzofuran (DPBF) as radical quencher and 5,5- dimethyl-1-pyrroline N-oxide (DMPO) as a radical scavenger confirmed the production of reductive reactive oxygen species using UV-vis and EPR studies. The rate of production of reactive oxygen species in the gold-based nanoparticles was small compared to the copper-based nanoparticles, that is CuONPs and CuO-Au (bimetallic) nanoalloys. The synthesized nanoparticles were further studied their potential use in the colorimetric detection of glucose. The copper-based nanomaterials, CuONPs and CuO-Au nanoalloys, were excellent towards detection of glucose, with a limit of detection (LoD) of 9.34 pM for CuONPs and 6.75 pM for CuO-Au nanoalloys. The linear concentration (LCR) range of CuONPs was 0 to 70 pM and for CuO-Au nanoalloys the LCR was 0.0 - 30 pM. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
The applicability of anaerobically digested pasteurized pit latrine faecal sludge as a fertilizer to grow radish and garden cress
- Authors: Madikizela, Phindile
- Date: 2017
- Subjects: Sewage sludge as fertilizer , Sewage sludge digestion , Sewage Purification Anaerobic treatment
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59235 , vital:27487
- Description: Pit latrine faecal sludge was recovered from numerous pit latrines in Hlalani Township, Grahamstown, South Africa. This material was used to prepare a fertilizer to demonstrate the value that could be captured from faecal sludge. Further anaerobic digestion, together with a co-feed demonstrated the potential of faecal sludge to produce low cost fertilizer that could be used to grow food crops. Biogas recovered from the anaerobic digester could be used to pasteurize its effluent, although effective biogas recovery and storage needs to be further addressed. Investigating the microbial community of the different depths of the pit latrine through molecular techniques showed that the fermenting bacteria family Clostridiaceae was the most commonly identified family throughout the different depths of the pit latrine, and that the microbial community within pit latrines was very diverse with bacterial families that are involved in nitrogen fixation, denitrification, and iron and sulphate reduction. Additionally, most of the bacterial families that dominated the seven studied pit latrines had members that were known human pathogens (Mycobacteriaceae, Dermatophilaceae Peptostreptococcaceae, Micrococcaceae, Staphylococcaceae, Leptospiraceae, Listeriaceae, Bradyrhizobiaceae and Brucellaceae). Effluent from a wastewater treatment works was selected as a co-feed to augment biogas production. The most successful faecal sludge and co-feed combination was shown to be the one made up of 33% and 66% pit latrine faecal sludge. 180 L of this effluent mixture generated 285 L of biogas over 45 days of anaerobic digestion (29±2°C). However, the recovered quantities were insufficient for pasteurization as 650 L of biogas was required to pasteurize 300 g of faecal sludge for 1 hour at 70±2°C. Therefore, liquid petroleum gas (LPG) was used as an alternative heating energy source. Anaerobic digestion and pasteurization rendered the faecal sludge safe for application as a fertilizer as the quality of the faecal sludge after treatment by anaerobic digestion and pasteurization was within the microbiological (Escherichia coli, Salmonella spp, Enterococcus faecium and helminth eggs) and trace element restrictions (Pb, Ni, Cr, Mo, As, Cu, Mn, Fe, Cd and Hg) of sludge application in agriculture as stipulated by the WHO and the South African Guidelines for Sludge Use in Agriculture. Radish (Raphanus sativus spp) and garden cress (Lepidium sativum) were cultivated to demonstrate the effectiveness of the anaerobically digested and pasteurized pit latrine faecal sludge as a fertilizer. Diluting the fertilizer prepared from faecal sludge did not reduce its efficacy and was comparable to the synthetic fertilizer used as a control in the growth trials in terms of the plant fresh weight, dry weight and plant height. Finally, the exposure to the current state of pit latrines in Hlalani Township provided an incentive to develop a new tool to address sanitation service delivery skill shortage (artisans, plant operation and maintenance workers, and sanitation and hygiene facilitators) through the use of volunteers. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
The effects of rhizobium inoculation on growth performance, forage production, nutrient and anti-nutrient content of lablab purpureus cultivars
- Authors: Senti, Sibongile Portia https://orcid.org/0000-0003-4906-9570
- Date: 2017
- Subjects: Livestock productivity , Rhizobium japonicum
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/22864 , vital:53011
- Description: Declining soil fertility and inadequate low quality feed resources limit smallholder livestock production in the semi-arid regions of Eastern Cape in South Africa. Smallholder farmers are facing problems of high cost of artificial fertilisers limiting them in production of cereal crops and also fodder for their livestock. This leads to poor nutrition, particularly in the dry season, it affects livestock production. Planting Lablab purpureus and inoculating with Rhizobium would limit the necessity for buying expensive protein supplements and nitrogen fertilisers. Lablab purpureus can provide feed in the dry season for the improvement of livestock production. The objective of this study was to investigate the effect of Bradyrhizobium japonicum inoculation on growth performance, biomass production, nutrient and anti-nutrient content of the two Lablab purpureus cultivars (Rongai and Highworth). The experiment was conducted at Fort Hare Research Farm in Alice, South Africa. Data was collected on plant seedling emergence, plant height, stem diameter, plant vigour, chlorophyll content, nodule numbers as well as dry matter content, biomass yield, nutrient and anti-nutrient contents at 30, 60 and 90 DAP. Samples of Lablab purpureus were harvested at flowering stage and analysed for dry matter content, biomass yield, chemical, mineral and anti-ntrient composition. The results showed that Rhizobium inoculation significantly increased (p<0.05) seedling emergence, plant height and stem diameter of both Lablab purpureus cultivars. Rhizobium inoculation had no significant effect (p>0.05) on chlorophyll content for both cultivars. Highworth had significantly higher (p<0.05) plant vigour than Rongai on both inoculated and uninoculated. Varieties and inoculation effects were significant (p<0.05) for number of nodules, nodulation rate, active nodules and nodule dry yield. Rhizobium inoculation significantly (p<0.05) increased fresh matter yield, dry matter yied and dry matter content on both cultivars. There were no significant differences (p>0.05) in NDF, ADIN, ADL, ADF, and Na between inoculated and uninoculated plants for both cultivars. The inoculation of Rhizobium improved CP (15.65%) in Highworth cultivar. The inoculation of Rhizobium significantly increased Ca (1.76-1.84%), Zn (191.91-2 8.33ppm) and Cu (3.50-6.16ppm) compared to un-inoculated plants. Varieties and Rhizobium had no interaction (p>0.05) with condensed tannin, hydrolysable tannin, total polyphenols and saponins . Therefore, the Rhizobium inoculation assisted in improving quality in terms of nutrient composition and decreasing anti-nutrients. It is recommended to use both cultivars of Lablab purpureus. Based on the results of this study it is concluded that Rhizobium inoculation increases yield and forage quality of Lablab purpureus. It is recommended that Highworth cultivar can be used by communal farmers in the Eastern Cape. This cultivar showed that it needs Rhizobium inoculation inorder to produce high quality that can increase livestock production. , Thesis (MSc) -- Faculty of Science and Agriculture, 2017
- Full Text:
- Date Issued: 2017
Development and assessment of gastric-retentive sustained release metronidazole microcapsules
- Authors: Makan, Anjana
- Date: 2017
- Subjects: Metronidazole , Drug delivery systems , Helicobacter pylori , High performance liquid chromatography , Gas chromatography , Drugs , Drugs Controlled release
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59240 , vital:27491
- Description: Helicobacter pylori is one of the most common pathogenic bacterial infections and is the leading cause of gastritis, gastroduodenal ulcer disease and gastric cancers. Studies have revealed the prevalence of Helicobacter pylori is high in many countries around the globe. Although Helicobacter pylori is highly sensitive to antimicrobial agents in vitro the clinical eradication rate of the disease is still low. The instability of API at gastric pH, low concentration of API in the gastric mucosa and short gastric residence times are the main reasons for poor eradication rates. The high prevalence rate of this disease necessitates the design and development of gastric-retentive site specific oral dosage forms for the optimized delivery of existing therapeutic molecules and may be an approach to improving the eradication rate of Helicobacter pylori. Metronidazole (MTZ) is a 5-nitroimidazole derivative that exhibits antibiotic and antiprotozoal activity. MTZ is used in combination with other compounds for the treatment of Helicobacter pylori in peptic ulcer disease. MTZ is a potential candidate for inclusion in a sustained release gastric-retentive delivery system that acts in the stomach and since it is unstable in the intestinal/colonic environment enhancing gastric residence time would be a therapeutic advantage. MTZ is a cost-effective therapy that exhibits good anti-microbial activity and has a favourable pharmacokinetic profile. A sustained release gastric-retentive formulation is therefore proposed as an approach to enhance the local delivery of MTZ and improve treatment outcomes for patients infected with Helicobacter pylori. A stability indicating Reversed-Phase High Performance Liquid Chromatography (RP- HPLC) method for the quantitation of MTZ in pharmaceutical dosage forms was developed and optimised using a Central Composite Design (CCD) approach. The RP-HPLC method was found to be linear, accurate, precise, sensitive, selective, and was applied to the analysis of MTZ in commercially available medicines. Preformulation studies were conducted as preparative work prior to manufacture gastric- retentive sustained release MTZ microcapsules. The experiments conducted were tailored for the development of sustained release MTZ microcapsules using a solvent evaporation method. The particle size and shape of the microcapsules was investigated using Scanning Electron Microscopy (SEM). MTZ- excipient compatibility studies were performed using Fourier Transform Infra-red Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and X-Ray Diffraction (XRD). The results revealed that no definite interaction between MTZ and intended excipients to be used for manufacture of MTZ formulations occurred. A solvent evaporation procedure was used for the manufacture of MTZ microcapsules. Preliminary formulations were manufactured using two different grades of Methocel® at various levels. In addition the impact of processing parameters on performance was also investigated. The formulations were assessed in terms of in vitro release, buoyancy, yield, encapsulation efficiency and microcapsule size. Formulation optimisation was undertaken using a CCD approach and numerical optimisation was used to predict an optimised formulation composition that would produce minimal initial MTZ release, maximum MTZ release at 12 hours and maximum buoyancy, encapsulation efficiency and yield. The kinetics of MTZ release from microcapsules was established by fitting in vitro release data to different mathematical models. Higuchi model and first-order model appeared to best fit the data as majority of the formulation batches had highest R2 values for these models. Short-term stability assessment of the optimised formulation was established by undertaking stability studies at 25°C/60% RH and 40°C/75%RH. No significant changes in any of the CQA were observed over 30 days of stability testing. A gas chromatographic (GC) method was developed and validated for the quantitation of residual acetone and n-hexane. The optimised formulation contained 213.60 ppm/g acetone and 25.23 ppm/g n-hexane which are well below the limits set for residual solvents. In conclusion, gastric-retentive sustained release MTZ microcapsules with potential for further development and optimisation have been successfully developed and assessed in these studies. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
Formulation development, manufacture and evaluation of hydralazine hydrochloride microspheres
- Authors: Kangausaru, Shakemore Tinashe
- Date: 2017
- Subjects: Hydralazine , Microspheres , Drugs Controlled release , Drugs Design , Drug development , Hypertension Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59220 , vital:27482
- Description: Despite improvements in its detection and treatment since the 1970s, hypertension is the most common and important risk factor for cardiovascular diseases. Hypertension is a chronic condition often underdiagnosed and/or inadequately treated in Sub-Saharan Africa. Recent survey results illustrate that the condition continues to contribute significantly to mortality and morbidity in adults and that it is poorly controlled in clinical practice. Hydralazine (HYD) is used either alone or in combination for the management of chronic hypertension, chronic cardiac failure and hypertensive crises. Due to its short plasma half-life of between 2 to 4 hours, HYD is normally administered two to four times daily, therefore making it a potential candidate for inclusion in sustained release formulations. The formulation of sustained release microsphere dosage forms may be useful to improve patient adherence and to achieve predictable and optimised therapeutic plasma concentrations. A stability indicating reversed-phase high performance liquid chromatography (RP-HPLC) method for the quantitation of HYD in pharmaceutical dosage forms was developed and optimised using a Central Composite Design (CCD) approach. UV/Vis detection method was selected as HYD contains an ultraviolet light-absorbing chromophore. The method was validated with respect to linearity and range, limits of quantitation (LOQ) and detection (LOD), accuracy, precision, sensitivity, selectivity and specificity as per International Conference on Harmonisation (ICH) guidelines. The method was applied to commercially available HYD tablets. No interfering peaks were observed from excipients used in the commercially available tablets. Preformulation studies were conducted to ensure the manufacture of high quality, stable sustained release HYD microspheres. The results revealed that there was an interaction between HYD and Carbopol® 971P, therefore Carbopol® polymers were not included during formulation studies. HYD was found to be compatible with Methocel® K100LV, Eudragit® RS PO and Avicel® 101 and HYD formulations were developed and optimised using these excipients. An oil-in-oil (o/o) solvent evaporation technique was selected for the manufacture of HYD microspheres due to its simplicity and to avoid exposure of HYD to moisture that could have been encountered if a water-in-oil (w/o) manufacturing process was used. The selection of o/o solvent evaporation technique was also based on the hydrophilicity of HYD and the polymers selected. Different grades of Methocel® and Eudragit® were selected to evaluate their effect on encapsulation efficiency (EE), in vitro release and microparticle shape and morphology. The best combination of these polymers which resulted in the desired EE, in vitro release, microparticle shape and size were then selected for formulation optimisation. A numerical optimisation approach was used to predict a formulation composition that would produce minimal HYD release initially and maximum HYD release after 12 hours of dissolution testing. The release kinetics of HYD from the manufactured microspheres were established by fitting in vitro release data to several mathematical models. The in vitro release data for the optimised formulations was best described using Higuchi model. The short-term stability of the optimised formulations was established by undertaking stability studies at 4°C, 25 °C/60 % RH and 40 °C/75 % RH. The results revealed that there was no significant change in appearance and physicochemical properties of the microspheres over a period of one month. However, long-term stability studies would be required to determine the shelf-life of the formulations. In addition, a gas chromatographic (GC) method was selected for determining residual amounts of acetone and n-hexane in the optimised formulations. GC methods were developed and optimised by evaluation of process parameters. System suitability testing was performed with respect to resolution, theoretical number of plates and selectivity. Method validation was performed with respect to linearity, range, inter- and intra-day precision, retention time (Rt) precision, limit of quantitation (LOQ) and detection (LOD). A solvent extraction method was used to analyse residual solvents in the optimised formulations. The drying process was sufficient in evaporating acetone and n-hexane from the optimised formulations. Solvent evaporation technique has been successfully used in the manufacture of HYD microspheres. The microspheres have potential for further development, scale up formulation studies and long-term stability studies. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
Investigation on the nature of records management in the office of the Premier Supply Chain management
- Authors: Vakalisa, Ndileka
- Date: 2017
- Subjects: Grahamstown (South Africa) , Eastern Cape (South Africa) , South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/27606 , vital:69319
- Description: The purpose of the study was to investigate on the nature of records management in the office of the Premier Supply Chain Management. This study focuses on the Supply Chain Unit in the office of the Premier in the Eastern Cape Province of South Africa. The study sought to investigate the classification systems in place that is records management policy, procedure manual and file plans. The legal framework that regulates archives. Data was collected using open-ended questionnaire. The target population of this study included all the officials within the Office of the Premier. The sample of 15 was derived from the supply chain management officials, records management managers and directors. The study adopted a qualitative research methodology, which is multimethod in its orientation, which involves an interpretative, naturalistic emphasis to its subject issue. Findings from the study revealed that the unit had its internal records management policy, an official framework document that outlined the processes involved in organising records within the department. Thus, there are policy frameworks within the department even though not clearly described to other employees, which might lead to risks in the management of records. The study also revealed that most records personnel were not trained to effectively manage records. It was also indicated that there is a lack of proper filing system and or electronic records management system. Hence, for effective and efficient records management, the study recommends the creation of a web-based integrated system for communication and where records can be accessed within one system. The study also recommends proper training of records personnel to mitigate risks. Hence, the study recommends that senior management create and implement a records management program that clearly outlines the procedures of records management, risks factors and how to minimize them. This will aide in good practice, uniformity, standardization, high levels of professionalism, accountability, and transparency. , Thesis (MLIS) -- Faculty of Social Sciences and Humanities, 2017
- Full Text:
- Date Issued: 2017
Composition and fate of triclosan in the sludge from wastewater treatment in Grahamstown, South Africa and Tiaret, Algeria
- Authors: Ncube, Mbonisi
- Date: 2017
- Subjects: Sewage sludge , Sewage Purification South Africa Grahamstown , Sewage Purification Algeria Tiaret , Sewage sludge as fertilizer , Anti-infective agents
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65156 , vital:28697
- Description: Physicochemical properties such as pH, specific surface area (SSA), cationic exchange capacity (CEC), loss on ignition (LOI), pathogens, plant nutrients (nitrates, ammonium and phosphates), and heavy metals (manganese, copper, lead and cadmium) were determined for sewage sludge from Grahamstown and Tiaret. The values obtained were log transformed thereafter a t-test at 5 % level of significance was used to test for the difference in each parameter for both sludges. The pH of sludge was determined in 1:3 water, 16 water, 1:3 0.01 M calcium chloride and 1:3 1 M potassium chloride. The pH for Grahamstown and Tiaret sludge were in the ranges of 6.66-7.11 and 7.88-8.18 respectively. The SSA values for Grahamstown and Tiaret were 218 ± 108 and 261 ± 99.9 m2/g, and the CEC values were 119 ± 2.09 and 136 ± 6.03 mEq/100, respectively. The LOI values obtained were 1.33 ± 0.03 and 1.48 ± 0.11 % for Grahamstown and Tiaret, respectively. E. coll and heterotrophic bacteria were the pathogens determined, and were extracted from sludge using sterile saline and nutrient broth. The concentration of E. coll in Grahamstown and Tiaret sludge were 468 ± 7.63 and 7769 ± 1268 CFU/g d.w and for heterotrophic bacteria were 1.17x109 ± 7.42x108 and 1.43x109 ± 9.11 x108 CFU/g d.w. For Grahamstown sludge, the concentration of nitrates, ammonium and phosphates were 55.61 ± 55.20 mg/g d.w, 6.60 ± 2.36 mg/g d.w and 1.40 ± 0.30 mg/g d.w, respectively. For Tiaret sludge, the concentration of nitrates, ammonium and phosphates were 2.56 ± 2.90 mg/g d.w, 0.64 ± 0.45 mg/g d.w and 0.24 ± 0.19 mg/g d.w, respectively. The concentration of Mn, Cu, Pb and Cd in Grahamstown sludge were 423 ± 101, 353 ± 92, 40.2 ± 20 and 0.0 mg/kg d.w respectively, and for Tiaret sludge, the corresponding concentrations were 358± 295, 549±50, 1427± 1352 and 1.54 ± 0.61 mg/kg d.w. Sewage sludge was found to contain Triclosan, and solubility studies of the compound were conducted using sodium deoxycholate and sodium lithocholate. The apparent solubilities and rate constants indicated in brackets of TCS at 37 °C were 35.4 ± 1.21 mg/L (1.28 ± 0.36 Hr-) and 14.4 ± 0.34 mg/L (0.99 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. The apparent solubilities and rate constants indicated in brackets of TCS at 15 °C were 32.3 ± 0.88 mg/L (2.16 ± 0.80 Hr-) and 14.2 ± 0.39 mg/L (1.02 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. Triclosan was extracted from sludge using 1 g/L sodium deoxycholate and the determined concentration were 142 ± 33.5 gg/g d.w for Grahamstown sludge and 0-12 gg/g d.w for Tiaret sludge. Finally plant growth studies were conducted on radish and garden cress plants using Grahamstown sludge at 0, 20, 40, 80 and 100 % treatments. Statistical analysis (t-test and Kruskal-Wallis) at 5 % level of significance was done to compare growth parameters between control and different sludge treatments. For radish plants, the values for plant height, root length, number of leaves, leaf length and dry mass were 28.4-80-7 mm, 4.3-44.7 mm, 3.3-17.0 mm, 2.3-4.0 leaves and 6.3-15.3 %, respectively. For garden cress, the values for plant height, root length, number of leaves, leaf length and dry mass were 13.7-25.0 mm, 7.7-20.3 mm, 5.7-8.3 leaves, 3.0-8.3 mm and 8.8-15.0 %, respectively. Twenty percent (20 %) sludge treatment gave the best results in radish and garden cress plants with respect to plant height, root length, number of leaves and dry mass. Triclosan concentration in radish and garden cress plants was below the detection limit of 32.4 gg/g d.w. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of benzoxaborole-based hybrids as antiplasmodial agents
- Authors: Gumbo, Maureen
- Date: 2017
- Subjects: Malaria Chemotherapy , Antimalarials , Boron compounds , Drug resistance , Plasmodium falciparum , Drug development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59193 , vital:27456
- Description: Malaria is a mosquito-borne disease, which continues to pose a threat to the entire humanity. About 40% of the world population is estimated to be at risk of infections by malaria. Despite efforts undertaken by scientific community, government entities and international organizations, malaria is still rampant. The major problem is drug resistance, where the Plasmodium spp have over the past decades developed drug resistance against available drugs. In order to counter this problem, novel antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Benzoxaborole derivatives have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported on the compounds such as 6-(2- (alkoxycarbonyl)pyrazinyl-5-oxy)-1,3-dihydro-1-hydroxy-2,1-benzoxaboroles, which showed good antimalarial activity against both W7 and 3D7 strains without significant toxicity. On the other hand, chloroquine (CQ) and cinnamic acids have a wide variety of biological activity including antimalarial activity. Herein, a hybridisation strategy was employed to synthesise new CQ-benzoxaborole and cinnamoyl-benzoxaborole hybrids. CQ-Benzoxaborole 2.12a-c and cinnamoylbenzoxaborole 2.11a-g hydrid molecules were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (1H and 13C NMR, and mass spectrometry). CQ-benzoxaborole compounds, however, showed instability, and only 2.12b was used for in vitro biological assay and showed activity comparable to CQ. Furthermore, in vitro biological assay revealed that compounds 2.11a-g poorly inhibited the growth of P. falciparum parasites. Interestingly, these compounds, however, exhibited satisfactory activity against Trypanosoma brucei with IC50 = 0.052 μM for compound 2.11g. The cell cytotoxicity assay of all final compounds confirmed that all CQ-benzoxaborole 2.12b and cinnamoyl-benzoxaborole 2.11a-g hybrids were non-toxic against HeLa cell lines. However, efforts to further expand the structure-activity relationship (SAR) of CQbenzoxaborole by increasing the length of the linker with one extra carbon (Scheme 2.10) were not possible as an important precursor 6-formylbenzoxaborole 2.29 could not be synthesized in sufficient yields. , Thesis (MSc) -- Faculty of Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
An Investigation into the community's experience of the land claim process: the case study of Cwengcwe village in King Williams Town, Eastern Cape
- Authors: Mgweba, Unati Natashe
- Date: 2017
- Subjects: Land reform -- South Africa , Restitution , Black people -- South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/26808 , vital:66011
- Description: This study examines Cwengcwe community’s experiences of the land claim process. This community is located in King William’s Town, Eastern Cape. The land issue remains unfinished business in the South African context with many land claimants still waiting to receive their land back or to be compensated for their land with money. Cwengcwe community members are not an exception in the channel of claiming back their land and having to wait for a lengthy period of time to be compensated. The main objective of the study was therefore to find out about the experiences of the Cwengcwe community with regards to the land claims process. The study adopted a qualitative research approach and the data was collected by conducting semi-structured interviews and observations. Purposive sampling was used to collect data from community members at Cwengcwe village. The findings of the study reveal that the community members in this village are very disappointed at the slow progress of processing the land claims, as their claims which were lodged in 2015 had not been settled as yet in November 2017. Furthermore, the minimal and/or lack of communication from the Department of Rural Development and Land Reform was a negative indicator in the prioritisation ladder. This study recommends further exploration of the land claim process in order to review its model and come up with alternative processes that might ease the land claim process. , Thesis (MSoc) -- Faculty of Social Sciences and Humanities, 2017
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of ferrocene-containing Novobiocin analogues for anticancer and antiplasmodial activity through inhibition of Hsp90
- Authors: Mbaba, Mziyanda
- Date: 2017
- Subjects: Antibiotics Synthesis , Ferrocene , Heat shock proteins , Antimalarials , Cancer Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65111 , vital:28690
- Description: Novobiocin (Nb) is a coumarin type antibiotic isolated from the bacterium species of Streptomyces and possesses modest anticancer and antimalarial activities. Nb and analogues have been extensively explored as potential anticancer agents through inhibition of the C- terminal domain of heat shock protein 90 (Hsp90), which plays a pivotal role in the proteinfolding machinery of cells. There has been little effort in the exploration of Nb and derivatives for antimalarial activity. Incorporation of organometallic units, such as ferrocene (Fc), into bioactive chemical scaffolds remains an attractive approach for developing new therapeutic agents for treatment of several ailments. The current study sought to investigate the anticancer and antiplasmodial effects of incorporating ferrocene (Fc) into Nb scaffold presumably through inhibition of Hsp90. The ferrocenyl Nb analogues containing simplified structural motifs such as phenyl, benzyl, and piperidine were synthesized in six to nine steps employing conventional synthetic organic protocols adapted from literature, and the compounds were accessed in reasonable yields. For comparison purposes, a selection of organic Nb analogues were also included in the study. The target compounds were characterized by spectroscopic techniques including 1-dimensional nuclear magnetic resonance (1D NMR) and high-resolution mass spectroscopy. The synthesized compounds were evaluated in vitro for potential anticancer and antiplasmodial activities using the breast cancer cell line (HCC38) and chloroquine-sensitive strain (3D7) of the malaria parasite, Plasmodium falciparum. The presence of the Fc unit was found to enhance both anticancer and antiplasmodial activities of the resultant ferrocenyl Nb compounds with IC50 values in the low to mid micromolar range. Hsp90 inhibitory studies of the ferrocenyl Nb analogues possessing superior activities (2.13a and 2.20c) were also conducted using different yeast strains expressing both human and malarial Hsp90 isoforms: hHsp90a/p and PfHsp90, respectively. The results of Hsp90 inhibitory studies suggested no direct correlation between the observed activities of the analogues and Hsp90 inhibition. However, since the conditions of the assay were not optimised due to time constrains of the project, these observed data remained to be confirmed. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017