Applications of polymerized metal tetra-amino phthalocyanines towards hydrogen peroxide detection
- Mashazi, Philani N, Togo, Chumunorwa, Limson, Janice, Nyokong, Tebello
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- Date Issued: 2010
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- Date Issued: 2010
Bioelectrocatalysis and surface analysis of gold coated with nickel oxide/hydroxide and glucose oxidase towards detection of glucose:
- Njoko, Nqobile, Louzada, Marcel, Britton, Jonathan, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Njoko, Nqobile , Louzada, Marcel , Britton, Jonathan , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150071 , vital:38937 , https://doi.org/10.1016/j.colsurfb.2020.110981
- Description: The fabricating of metal oxide thin films onto conducting surfaces continues to grow and their potential applications as surfaces for biosensor applications is of paramount importance. The correct orientation of glucose oxidase redox enzymes yields very important biointerfaces capable of selectively detecting D-glucose as a measure of blood sugar for healthy and diabetic sick patients. The electrodeposition of redox enzymes, such as glucose oxidase enzymes, onto gold electrode surfaces pre-modified with nickel oxide was investigated in this work.
- Full Text:
- Date Issued: 2020
- Authors: Njoko, Nqobile , Louzada, Marcel , Britton, Jonathan , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150071 , vital:38937 , https://doi.org/10.1016/j.colsurfb.2020.110981
- Description: The fabricating of metal oxide thin films onto conducting surfaces continues to grow and their potential applications as surfaces for biosensor applications is of paramount importance. The correct orientation of glucose oxidase redox enzymes yields very important biointerfaces capable of selectively detecting D-glucose as a measure of blood sugar for healthy and diabetic sick patients. The electrodeposition of redox enzymes, such as glucose oxidase enzymes, onto gold electrode surfaces pre-modified with nickel oxide was investigated in this work.
- Full Text:
- Date Issued: 2020
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Covalent attachment of cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine onto pre-grafted gold electrode for the determination of catecholamine neurotransmitters:
- Tshenkeng, Keamogetse, Mashazi, Philani N
- Authors: Tshenkeng, Keamogetse , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163521 , vital:41045 , https://doi.org/10.1016/j.electacta.2020.137015
- Description: The fabrication of electroactive thin films onto gold electrode surfaces yields very interesting surfaces with excellent electrocatalytic activity. Cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine (CoTCPhOPc) was successfully synthesized and fully characterized using FT-IR spectroscopy, ultraviolet-visible (UV–Vis) spectroscopy, magnetic circular dichroism (MCD) spectroscopy, elemental analysis, and mass spectrometry. The CoTCPhOPc was immobilized onto phenylethylamino (PEA) pre-grafted gold electrode surface, Au-PEA, using amide coupling reaction to obtain Au-PEA-CoTCPhOPc.
- Full Text:
- Date Issued: 2020
- Authors: Tshenkeng, Keamogetse , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163521 , vital:41045 , https://doi.org/10.1016/j.electacta.2020.137015
- Description: The fabrication of electroactive thin films onto gold electrode surfaces yields very interesting surfaces with excellent electrocatalytic activity. Cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine (CoTCPhOPc) was successfully synthesized and fully characterized using FT-IR spectroscopy, ultraviolet-visible (UV–Vis) spectroscopy, magnetic circular dichroism (MCD) spectroscopy, elemental analysis, and mass spectrometry. The CoTCPhOPc was immobilized onto phenylethylamino (PEA) pre-grafted gold electrode surface, Au-PEA, using amide coupling reaction to obtain Au-PEA-CoTCPhOPc.
- Full Text:
- Date Issued: 2020
Critical assessment of the quartz crystal microbalance with dissipation as an analytical tool for biosensor development and fundamental studies
- Fogel, Ronen, Mashazi, Philani N, Nyokong, Tebello, Limson, Janice
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D’Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
Electrocatalytic behaviour of surface confined pentanethio cobalt (II) binuclear phthalocyanines towards the oxidation of 4-chlorophenol
- Makinde, Zainab O, Louzada, Marcel, Mashazi, Philani N, Nyokong, Tebello, Khene, Samson M
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
Electrochemical impedimetric immunosensor for the detection of measles-specific IgG antibodies after measles infections
- Mashazi, Philani N, Tetyana, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
Electrode Modification Using Alkynyl Substituted Fe(II) Phthalocyanine via Electrografting and Click Chemistry for Electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
Electrode modification using nanocomposites of electropolymerised cobalt phthalocyanines supported on multiwalled carbon nanotubes
- Nyoni, Stephen, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7293 , http://hdl.handle.net/10962/d1020356
- Description: A polymer of tetra(4)-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) has been deposited over a multiwalled carbon nanotube (MWCNT) platform and its electrocatalytic properties investigated side by side with polymerized cobalt tetraamino phthalocyanine (CoTAPc). X-ray photoelectron spectroscopy, scanning electron microscopy and cyclic voltammetry studies were used for characterization of the prepared polymers of cobalt phthalocyanine derivatives and their nanocomposites. l-Cysteine was used as a test analyte for the electrocatalytic activity of the nanocomposites of polymerized cobalt phthalocyanines and multiwalled carbon nanotubes. The electrocatalytic activity of both polymerized cobalt phthalocyanines was found to be superior when polymerization was done on top of MWCNTs compared to bare glassy carbon electrode. A higher sensitivity for l-cysteine detection was obtained on CoTAPc compared to CoPyPc. , Original publication is available at http://dx.doi.org/10.1007/s10008-015-2985-6
- Full Text: false
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7293 , http://hdl.handle.net/10962/d1020356
- Description: A polymer of tetra(4)-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) has been deposited over a multiwalled carbon nanotube (MWCNT) platform and its electrocatalytic properties investigated side by side with polymerized cobalt tetraamino phthalocyanine (CoTAPc). X-ray photoelectron spectroscopy, scanning electron microscopy and cyclic voltammetry studies were used for characterization of the prepared polymers of cobalt phthalocyanine derivatives and their nanocomposites. l-Cysteine was used as a test analyte for the electrocatalytic activity of the nanocomposites of polymerized cobalt phthalocyanines and multiwalled carbon nanotubes. The electrocatalytic activity of both polymerized cobalt phthalocyanines was found to be superior when polymerization was done on top of MWCNTs compared to bare glassy carbon electrode. A higher sensitivity for l-cysteine detection was obtained on CoTAPc compared to CoPyPc. , Original publication is available at http://dx.doi.org/10.1007/s10008-015-2985-6
- Full Text: false
Exploiting Click Chemistry for the Covalent Immobilization of Tetra (4-Propargyloxyphenoxy) Metallophthalocyanines onto Phenylazide-Grafted Gold Surfaces
- Mwanza, Daniel, Mvango, Sindisiwe, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
Fabrication of dye-sensitized solar cells based on push-pull asymmetrical substituted zinc and copper phthalocyanines and reduced graphene oxide nanosheet:
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Oluwole, David O, Mapukata, Sivuyisiwe, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
Iodine-Doped Cobalt Phthalocyanine Supported on Multiwalled Carbon Nanotubes for Electrocatalysis of Oxygen Reduction Reaction
- Nyoni, Stephen, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
Optimizing phthalocyanine based dye-sensitized solar cells: The role of reduced graphene oxide
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Fomo, Gertrude, Oluwole, David O, Sindelo, Azole, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
Photophysical properties of zinc phthalocyanine–uridine single walled carbon nanotube – conjugates
- Ogbodu, Racheal O, Amuhaya, Edith, Mashazi, Philani N, Nyokong, Tebello
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015
Physicochemical and antimicrobial photodynamic chemotherapy of unsymmetrical indium phthalocyanines alone or in the presence of magnetic nanoparticles
- Osifeko, Olawale L, Uddin, Imran, Mashazi, Philani N, Nyokong, Tebello
- Authors: Osifeko, Olawale L , Uddin, Imran , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189121 , vital:44818 , xlink:href="https://doi.org/10.1039/C5NJ01922B"
- Description: An AB3 type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.
- Full Text:
- Date Issued: 2016
- Authors: Osifeko, Olawale L , Uddin, Imran , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189121 , vital:44818 , xlink:href="https://doi.org/10.1039/C5NJ01922B"
- Description: An AB3 type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.
- Full Text:
- Date Issued: 2016
Selective adsorption of PVP on the surface of silver nanoparticles
- Mdluli, Phumlani S, Sosibo, Ndabenhle M, Mashazi, Philani N, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, van der Lingen, Elma
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- Date Issued: 2011
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- Date Issued: 2011
Self-assembled monolayers (SAMs) of cobalt tetracarboxylic acidchloride phthalocyanine covalently attached onto a preformed mercaptoethanol SAM
- Mashazi, Philani N, Ozoemena, Kenneth I, Maree, David M, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006
Surface chemistry and electrocatalytic behaviour of tetra-carboxy substituted iron, cobalt and manganese phthalocyanine monolayers on gold electrode
- Mashazi, Philani N, Westbroek, Philippe, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Mashazi, Philani N , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/268806 , vital:54233 , xlink:href="https://doi.org/10.1016/j.electacta.2007.08.044"
- Description: Surface chemistry and electrocatalytic properties of self-assembled monolayers of metal tetra-carboxylic acid phthalocyanine complexes with cobalt (Co), iron (Fe) and manganese (Mn) as central metal ions have been studied. These phthalocyanine molecules are immobilized on gold electrode via the coupling reaction between the ring substituents and pre-formed mercaptoethanol self-assembled monolayer (Au-ME SAM). X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed chemisorption of mercaptoethanol via sulfur group on gold electrode and also coupling reaction between phthalocyanines and Au-ME SAM. Electrochemical parameters of the immobilized molecules show that these molecules are densely packed with a perpendicular orientation. The potential applications of the gold modified electrodes were investigated towards L-cysteine detection and the analysis at phthalocyanine SAMs. Cobalt and iron tetra-carboxylic acid phthalocyanine monolayers showed good oxidation peak for L-cysteine at potentials where metal oxidation (MIII/MII) takes place and this metal oxidation mediates the catalytic oxidation of L-cysteine. Manganese tetra-carboxylic acid phthalocyanine monolayer also exhibited a good catalytic oxidation peak towards L-cysteine at potentials where MnIV/MnIII redox peak occurs and this redox peak mediates L-cysteine oxidation. The analysis of cysteine at phthalocyanine monolayers displayed good analytical parameters with good detection limits of the orders of 10−7 mol L−1 and good linearity for a studied concentration range up to 60 μmol L−1.
- Full Text:
- Date Issued: 2007
- Authors: Mashazi, Philani N , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/268806 , vital:54233 , xlink:href="https://doi.org/10.1016/j.electacta.2007.08.044"
- Description: Surface chemistry and electrocatalytic properties of self-assembled monolayers of metal tetra-carboxylic acid phthalocyanine complexes with cobalt (Co), iron (Fe) and manganese (Mn) as central metal ions have been studied. These phthalocyanine molecules are immobilized on gold electrode via the coupling reaction between the ring substituents and pre-formed mercaptoethanol self-assembled monolayer (Au-ME SAM). X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed chemisorption of mercaptoethanol via sulfur group on gold electrode and also coupling reaction between phthalocyanines and Au-ME SAM. Electrochemical parameters of the immobilized molecules show that these molecules are densely packed with a perpendicular orientation. The potential applications of the gold modified electrodes were investigated towards L-cysteine detection and the analysis at phthalocyanine SAMs. Cobalt and iron tetra-carboxylic acid phthalocyanine monolayers showed good oxidation peak for L-cysteine at potentials where metal oxidation (MIII/MII) takes place and this metal oxidation mediates the catalytic oxidation of L-cysteine. Manganese tetra-carboxylic acid phthalocyanine monolayer also exhibited a good catalytic oxidation peak towards L-cysteine at potentials where MnIV/MnIII redox peak occurs and this redox peak mediates L-cysteine oxidation. The analysis of cysteine at phthalocyanine monolayers displayed good analytical parameters with good detection limits of the orders of 10−7 mol L−1 and good linearity for a studied concentration range up to 60 μmol L−1.
- Full Text:
- Date Issued: 2007