Electrochemical behaviour of thiol-derivatised zinc (II) phthalocyanine complexes and their self-immobilised films at gold electrodes
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290295 , vital:56737 , xlink:href="https://doi.org/10.1016/j.microc.2003.08.002"
- Description: Electrochemical properties of novel, peripherally substituted zinc phthalocyanine complex, octa(4-methylphenylthio-) phthalocyaninatozinc(II) [ZnPc(SC6H4CH3)8] (1a) in DMF solution are presented. This complex showed five quasi-reversible/reversible, diffusion-controlled redox couples. Solution voltammetry of 1a showed little contrast with that of its alkythiol-derivative, octabutylthiophthalocyaninatozinc(II) [ZnPc(SC4H9)8] (1b) in that both thiol-substituents tend to show electron-withdrawing influence on the phthalocyanine ligands; complex 1a showing easier reduction and more difficult to oxidation when compared to 1b and other alkyl derivatives. The voltammetric features of the solid ultrathin films of 1a and 1b, immobilized on gold electrodes via the self-assembling technique, are also presented. Interestingly, the self-assembled films are stable and reproducible and provide good suppression to the following Faradaic processes; gold surface oxidation, solution ion species and underpotential deposition (UPD) of copper.
- Full Text:
- Date Issued: 2003
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290295 , vital:56737 , xlink:href="https://doi.org/10.1016/j.microc.2003.08.002"
- Description: Electrochemical properties of novel, peripherally substituted zinc phthalocyanine complex, octa(4-methylphenylthio-) phthalocyaninatozinc(II) [ZnPc(SC6H4CH3)8] (1a) in DMF solution are presented. This complex showed five quasi-reversible/reversible, diffusion-controlled redox couples. Solution voltammetry of 1a showed little contrast with that of its alkythiol-derivative, octabutylthiophthalocyaninatozinc(II) [ZnPc(SC4H9)8] (1b) in that both thiol-substituents tend to show electron-withdrawing influence on the phthalocyanine ligands; complex 1a showing easier reduction and more difficult to oxidation when compared to 1b and other alkyl derivatives. The voltammetric features of the solid ultrathin films of 1a and 1b, immobilized on gold electrodes via the self-assembling technique, are also presented. Interestingly, the self-assembled films are stable and reproducible and provide good suppression to the following Faradaic processes; gold surface oxidation, solution ion species and underpotential deposition (UPD) of copper.
- Full Text:
- Date Issued: 2003
Self-Assembled Monolayers of Cobalt and Iron Phthalocyanine Complexes on Gold Electrodes
- Ozoemena, Kenneth I, Nyokong, Tebello, Westbroek, Philippe
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello , Westbroek, Philippe
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290363 , vital:56743 , xlink:href="https://doi.org/10.1002/elan.200302753"
- Description: The self-assembling of the octa(hydroxyethylthio)-metallophthalocyanine {MOHETPc (M=Co and Fe)} complexes and their similar analogues, octabutylthiometallophthalocyanine {MOBTPc (M=Co and Fe)} complexes on gold electrodes are investigated. Comparative surface voltammetric insights into their distinct self-assembling properties with respect to the passivation of Faradaic processes and surface coverages, including their solution electrochemistry, suggest different orientations and non-cleavage of their CS bonds. In the pH 2−9 range, the reversible [M(III)Pc(−2)]+ / [M(II)Pc(−2)] redox couples show potential shifts close to −59 mV / pH. The gold electrodes modified with the SAMs of these species show electrocatalytic activity towards the oxidation of thiols (L-cysteine, homocysteine and penicillamine) and thiocyanate in acidic media with detection limits in the region of 10−7–10−6 mol dm−3. These monolayers are stable and easily reproducible.
- Full Text:
- Date Issued: 2003
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello , Westbroek, Philippe
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290363 , vital:56743 , xlink:href="https://doi.org/10.1002/elan.200302753"
- Description: The self-assembling of the octa(hydroxyethylthio)-metallophthalocyanine {MOHETPc (M=Co and Fe)} complexes and their similar analogues, octabutylthiometallophthalocyanine {MOBTPc (M=Co and Fe)} complexes on gold electrodes are investigated. Comparative surface voltammetric insights into their distinct self-assembling properties with respect to the passivation of Faradaic processes and surface coverages, including their solution electrochemistry, suggest different orientations and non-cleavage of their CS bonds. In the pH 2−9 range, the reversible [M(III)Pc(−2)]+ / [M(II)Pc(−2)] redox couples show potential shifts close to −59 mV / pH. The gold electrodes modified with the SAMs of these species show electrocatalytic activity towards the oxidation of thiols (L-cysteine, homocysteine and penicillamine) and thiocyanate in acidic media with detection limits in the region of 10−7–10−6 mol dm−3. These monolayers are stable and easily reproducible.
- Full Text:
- Date Issued: 2003
Synthesis, spectroscopy and photochemistry of octasubstituted thiol-derivatized phthalocyaninatozinc (II) complexes
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290401 , vital:56746 , xlink:href="https://doi.org/10.1016/S1387-7003(03)00218-1"
- Description: Synthesis, spectroscopic and photochemical characterization of phenylthiol-derivatized zinc phthalocyanine complex: 2,3,9,10,16,17,23,24-octa(4-methylphenylthio-)phthalocyaninatozinc(II) [ZnPc(SC6H4CH3)8] (3a) and its alkanethiol derivative, 2,3,9,10,16,17,23,24-octabutylthiophthalocyaninatozinc(II) [ZnPc(SC4H9)8] (3b) are described. Spectroscopic analyses show that 3a has a higher aggregation tendency than 3b in organic solvents. Photochemical studies indicate that 3b is more photostable and more efficient at singlet oxygen generation than 3a.
- Full Text:
- Date Issued: 2003
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2003
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/290401 , vital:56746 , xlink:href="https://doi.org/10.1016/S1387-7003(03)00218-1"
- Description: Synthesis, spectroscopic and photochemical characterization of phenylthiol-derivatized zinc phthalocyanine complex: 2,3,9,10,16,17,23,24-octa(4-methylphenylthio-)phthalocyaninatozinc(II) [ZnPc(SC6H4CH3)8] (3a) and its alkanethiol derivative, 2,3,9,10,16,17,23,24-octabutylthiophthalocyaninatozinc(II) [ZnPc(SC4H9)8] (3b) are described. Spectroscopic analyses show that 3a has a higher aggregation tendency than 3b in organic solvents. Photochemical studies indicate that 3b is more photostable and more efficient at singlet oxygen generation than 3a.
- Full Text:
- Date Issued: 2003
Determination of 2′, 3′-Dideoxyinosine Using Iron (II) Phthalocyanine Modified Carbon Paste Electrode
- Ozoemena, Kenneth I, Stefan, Raluca-Ioana, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Stefan, Raluca-Ioana , Nyokong, Tebello
- Date: 2004
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300298 , vital:57914 , xlink:href="https://doi.org/10.1081/AL-200031940"
- Description: An amperometric sensor, based on carbon paste impregnated with iron (II) phthalocyanine complex (FePc), has been constructed for the assay of anti‐HIV agent dideoxyinosine (didanosine, DDI). Using chronoamperometry (E = +1.04 V versus Ag/AgCl) technique, the amperometric sensor can be used reliably for dideoxyinosine assay at pH 7.4 phosphate buffer in the 1.5–9.5 nmol/L concentration range with a detection limit of 5.7 × 10−10 mol/L. The surface of the electrode can easily be regenerated by simple polishing, obtaining a fresh surface ready for use in a new assay. The new amperometric sensor proved to be highly reliable for the assay of dideoxyinosine purity in raw material as well as for the uniformity content test of Videx® tablets.
- Full Text:
- Date Issued: 2004
- Authors: Ozoemena, Kenneth I , Stefan, Raluca-Ioana , Nyokong, Tebello
- Date: 2004
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300298 , vital:57914 , xlink:href="https://doi.org/10.1081/AL-200031940"
- Description: An amperometric sensor, based on carbon paste impregnated with iron (II) phthalocyanine complex (FePc), has been constructed for the assay of anti‐HIV agent dideoxyinosine (didanosine, DDI). Using chronoamperometry (E = +1.04 V versus Ag/AgCl) technique, the amperometric sensor can be used reliably for dideoxyinosine assay at pH 7.4 phosphate buffer in the 1.5–9.5 nmol/L concentration range with a detection limit of 5.7 × 10−10 mol/L. The surface of the electrode can easily be regenerated by simple polishing, obtaining a fresh surface ready for use in a new assay. The new amperometric sensor proved to be highly reliable for the assay of dideoxyinosine purity in raw material as well as for the uniformity content test of Videx® tablets.
- Full Text:
- Date Issued: 2004
Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286065 , vital:56235 , xlink:href="https://doi.org/10.1016/j.talanta.2005.02.030"
- Description: Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe(III)Pc/Fe(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10−5 to 9.2 × 10−5 mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10−4 mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286065 , vital:56235 , xlink:href="https://doi.org/10.1016/j.talanta.2005.02.030"
- Description: Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe(III)Pc/Fe(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10−5 to 9.2 × 10−5 mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10−4 mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
Hydrogen peroxide oxidation of 2-chlorophenol and 2, 4, 5-trichlorophenol catalyzed by monomeric and aggregated cobalt tetrasulfophthalocyanine
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
Immobilized cobalt (II) phthalocyanine–cobalt (II) porphyrin pentamer at a glassy carbon electrode
- Ozoemena, Kenneth I, Zhao, Zhixin, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300322 , vital:57916 , xlink:href="https://doi.org/10.1016/j.elecom.2005.04.019"
- Description: This communication describes the electrochemistry of a novel cobalt phthalocyanine–cobalt porphyrin (cobalt(II)phthalocyanine–cobalt(II)tetra(5-phenoxy-10,15,20-triphenylporphyrin)) (CoPc-(CoTPP)4) immobilised onto a glassy carbon electrode (GCE). The GCE-CoPc-(CoTPP)4 displayed high efficiency as a potential amperometric sensor for hydrogen peroxide (H2O2) in neutral and alkaline pH conditions. Electrochemical and electrocatalytic properties of the pentamer seem to depend mostly on the central CoPc, and partly, on the synergistic effect of the CoPc/CoPP units. The GCE-CoPc-(CoTPP)4 showed very fast amperometric response (∼1 s), with linearities up to ⩾1.50 mM, low detection limits (μM range) and stability (8 weeks) towards the amperometric determination of laboratory and medical solutions of H2O2.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300322 , vital:57916 , xlink:href="https://doi.org/10.1016/j.elecom.2005.04.019"
- Description: This communication describes the electrochemistry of a novel cobalt phthalocyanine–cobalt porphyrin (cobalt(II)phthalocyanine–cobalt(II)tetra(5-phenoxy-10,15,20-triphenylporphyrin)) (CoPc-(CoTPP)4) immobilised onto a glassy carbon electrode (GCE). The GCE-CoPc-(CoTPP)4 displayed high efficiency as a potential amperometric sensor for hydrogen peroxide (H2O2) in neutral and alkaline pH conditions. Electrochemical and electrocatalytic properties of the pentamer seem to depend mostly on the central CoPc, and partly, on the synergistic effect of the CoPc/CoPP units. The GCE-CoPc-(CoTPP)4 showed very fast amperometric response (∼1 s), with linearities up to ⩾1.50 mM, low detection limits (μM range) and stability (8 weeks) towards the amperometric determination of laboratory and medical solutions of H2O2.
- Full Text:
- Date Issued: 2005
Surface electrochemistry of iron phthalocyanine axially ligated to 4-mercaptopyridine self-assembled monolayers at gold electrode
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289282 , vital:56615 , xlink:href="https://doi.org/10.1016/j.jelechem.2005.02.018"
- Description: Surface electrochemical behaviour of a self-immobilised iron phthalocyanine (FePc) ultrathin film, via axial ligation reaction, onto a preformed 4-mercaptopyridine self-assembled monolayer on gold electrode has been described. Electrochemical evidence for the sensor clearly suggested surface-confined, flat “umbrella”-oriented and densely-packed monolayer film structure. The proposed electrochemical sensor exhibited good catalytic activity towards the oxidation of thiocyanate in pH 4.0 medium over a linear range of three decades of concentration (ca. 10−6–10−3 mol dm−3) with a detection limit in the order of ∼10−7 mol dm−3. The sensor exhibited useful potential for the analysis of thiocyanate in human urine and saliva samples. The advantageous properties of this type of electrode as a sensor for thiocyanate lie in its ease of fabrication, excellent catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289282 , vital:56615 , xlink:href="https://doi.org/10.1016/j.jelechem.2005.02.018"
- Description: Surface electrochemical behaviour of a self-immobilised iron phthalocyanine (FePc) ultrathin film, via axial ligation reaction, onto a preformed 4-mercaptopyridine self-assembled monolayer on gold electrode has been described. Electrochemical evidence for the sensor clearly suggested surface-confined, flat “umbrella”-oriented and densely-packed monolayer film structure. The proposed electrochemical sensor exhibited good catalytic activity towards the oxidation of thiocyanate in pH 4.0 medium over a linear range of three decades of concentration (ca. 10−6–10−3 mol dm−3) with a detection limit in the order of ∼10−7 mol dm−3. The sensor exhibited useful potential for the analysis of thiocyanate in human urine and saliva samples. The advantageous properties of this type of electrode as a sensor for thiocyanate lie in its ease of fabrication, excellent catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
Comparative efficiency of immobilized non-transition metal phthalocyanine photosensitizers for the visible light transformation of chlorophenols
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
- Date Issued: 2006
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
- Date Issued: 2006
Comparative electrochemistry and electrocatalytic activities of cobalt, iron and manganese phthalocyanine complexes axially co-ordinated to mercaptopyridine self-assembled monolayer at gold electrodes
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286054 , vital:56234 , xlink:href="https://doi.org/10.1016/j.electacta.2005.08.007"
- Description: Comparative surface electrochemistry and electrocatalytic properties of solid ultrathin monolayer films of metallophthalocyanine (MPc) complexes of cobalt (CoPc), iron (FePc) and manganese (MnPc) self-immobilised, via axial ligation reaction, onto preformed 4-mercaptopyridine self-assembled monolayers (SAMs) on gold electrodes have been described. Surface electrochemical parameters of the modified electrodes showed that these MPc-SAMs are densely packed with flat orientations. The electrochemical, electrocatalytic and stability properties of these MPc complexes follow this order: FePc > MnPc > CoPc. This finding is remarkable as it suggests that the success of using this method of self-assembling of MPc onto gold electrode is largely dependent on the bond distance between the pyridine linker and the central metal of the MPc; the shorter the distance, the faster the co-ordination and the better the electrocatalytic properties towards L-cysteine and thiocyanate. Thus, the superiority of FePc-based SAM over those of the MnPc and CoPc, has been proposed to be the result of the more favorable axial co-ordination properties of FePc with pyridine (i.e. shorter Fe–N(pyridine) bond length.
- Full Text:
- Date Issued: 2006
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286054 , vital:56234 , xlink:href="https://doi.org/10.1016/j.electacta.2005.08.007"
- Description: Comparative surface electrochemistry and electrocatalytic properties of solid ultrathin monolayer films of metallophthalocyanine (MPc) complexes of cobalt (CoPc), iron (FePc) and manganese (MnPc) self-immobilised, via axial ligation reaction, onto preformed 4-mercaptopyridine self-assembled monolayers (SAMs) on gold electrodes have been described. Surface electrochemical parameters of the modified electrodes showed that these MPc-SAMs are densely packed with flat orientations. The electrochemical, electrocatalytic and stability properties of these MPc complexes follow this order: FePc > MnPc > CoPc. This finding is remarkable as it suggests that the success of using this method of self-assembling of MPc onto gold electrode is largely dependent on the bond distance between the pyridine linker and the central metal of the MPc; the shorter the distance, the faster the co-ordination and the better the electrocatalytic properties towards L-cysteine and thiocyanate. Thus, the superiority of FePc-based SAM over those of the MnPc and CoPc, has been proposed to be the result of the more favorable axial co-ordination properties of FePc with pyridine (i.e. shorter Fe–N(pyridine) bond length.
- Full Text:
- Date Issued: 2006
Electrocatalysis of asulam on cobalt phthalocyanine modified multi-walled carbon nanotubes immobilized on a basal plane pyrolytic graphite electrode
- Siswana, Msimelelo P, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6595 , http://hdl.handle.net/10962/d1004344
- Description: This work describes the electrochemical properties of cobalt tetra-aminophthalocyanine (CoTAPc) complex electropolymerized at the surface of multi-walled carbon nanotube (MWCNT) abrasively immobilized onto a basal plane pyrolytic graphite electrode (BPPGE). The constructed electrode displayed excellent electrocatalytic behaviour towards the oxidation of the herbicide, asulam, as evidenced by the enhancement of the oxidation peak current (~6 times) and the shift in the oxidation potential to lower values (by ~120 mV) in comparison with the bare BPPGE. The chronoamperometric detection of asulam which was carried out in 0.10 M phosphate buffer (pH 7.0) at a fixed potential of 0.65 V (versus Ag|AgCl) yielded excellent analytical parameters; a linear concentration range of 4.5–20 μM, a sensitivity of 241 × 10[superscript −3] μA/μM, a detection limit of 1.15 μM asulam (using the Y[subscript B] + 3σ criterion) and a response time of ~2 s.
- Full Text:
- Date Issued: 2006
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6595 , http://hdl.handle.net/10962/d1004344
- Description: This work describes the electrochemical properties of cobalt tetra-aminophthalocyanine (CoTAPc) complex electropolymerized at the surface of multi-walled carbon nanotube (MWCNT) abrasively immobilized onto a basal plane pyrolytic graphite electrode (BPPGE). The constructed electrode displayed excellent electrocatalytic behaviour towards the oxidation of the herbicide, asulam, as evidenced by the enhancement of the oxidation peak current (~6 times) and the shift in the oxidation potential to lower values (by ~120 mV) in comparison with the bare BPPGE. The chronoamperometric detection of asulam which was carried out in 0.10 M phosphate buffer (pH 7.0) at a fixed potential of 0.65 V (versus Ag|AgCl) yielded excellent analytical parameters; a linear concentration range of 4.5–20 μM, a sensitivity of 241 × 10[superscript −3] μA/μM, a detection limit of 1.15 μM asulam (using the Y[subscript B] + 3σ criterion) and a response time of ~2 s.
- Full Text:
- Date Issued: 2006
Electrocatalytic behaviour of carbon paste electrode modified with iron(II) phthalocyanine (FePc) nanoparticles towards the detection of amitrole
- Siswana, Msimelelo P, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6591 , http://hdl.handle.net/10962/d1004340
- Description: This paper describes the construction of a carbon paste electrode (CPE) impregnated with nanoparticles of iron(II) phthalocyanine (nanoFePc). The new electrode (nanoFePc-CPE) revealed interesting electrocatalytic behaviour towards amitrole; pure catalytic diffusion-controlled process, with high Tafel slope (235 mV/decade) suggesting strong binding of amitrole with nanoFePc catalyst. The effects of catalyst loading, varying pH and electrolytes were studied. The mechanism for the interaction of amitrole with the nanoFePc is proposed to involve the Fe[superscript (III)]Pc/Fe[superscript (II)]Pc redox process. Using chronoamperometry (E = +0.42 V versus Ag/AgCl) technique, the sensor was reliably employed for amitrole assay at pH 12.0 phosphate buffer (with sodium sulphate as the supporting electrolyte) for up to 12 nM amitrole with excellent sensitivity (ca. 3.44 μA/nM) and low detection limit (3.62 ± 0.11 nM, i.e. 0.305 μg L[superscript (−1)] using the YB + 3σB criterion and 0.85 ± 0.03 nM, i.e. 70 ng/L with the Y[subscript B] + 2[subscript σB] criterion) as well as satisfactory amperometric selectivity coefficient (K[subscript amp] ≈ 7.4 × 10[superscript (−4)] for ammonium thiocyanate, a component of many amitrole herbicides, and 3.2 × 10[superscript (−3)] for asulam pesticide). The surface of the electrode can easily be regenerated by simple polishing on an alumina paper, obtaining a fresh surface ready for use in a new assay. The proposed electrode was successfully applied in the quantification of amitrole in its commercial formulation as well as in tap water samples.
- Full Text:
- Date Issued: 2006
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6591 , http://hdl.handle.net/10962/d1004340
- Description: This paper describes the construction of a carbon paste electrode (CPE) impregnated with nanoparticles of iron(II) phthalocyanine (nanoFePc). The new electrode (nanoFePc-CPE) revealed interesting electrocatalytic behaviour towards amitrole; pure catalytic diffusion-controlled process, with high Tafel slope (235 mV/decade) suggesting strong binding of amitrole with nanoFePc catalyst. The effects of catalyst loading, varying pH and electrolytes were studied. The mechanism for the interaction of amitrole with the nanoFePc is proposed to involve the Fe[superscript (III)]Pc/Fe[superscript (II)]Pc redox process. Using chronoamperometry (E = +0.42 V versus Ag/AgCl) technique, the sensor was reliably employed for amitrole assay at pH 12.0 phosphate buffer (with sodium sulphate as the supporting electrolyte) for up to 12 nM amitrole with excellent sensitivity (ca. 3.44 μA/nM) and low detection limit (3.62 ± 0.11 nM, i.e. 0.305 μg L[superscript (−1)] using the YB + 3σB criterion and 0.85 ± 0.03 nM, i.e. 70 ng/L with the Y[subscript B] + 2[subscript σB] criterion) as well as satisfactory amperometric selectivity coefficient (K[subscript amp] ≈ 7.4 × 10[superscript (−4)] for ammonium thiocyanate, a component of many amitrole herbicides, and 3.2 × 10[superscript (−3)] for asulam pesticide). The surface of the electrode can easily be regenerated by simple polishing on an alumina paper, obtaining a fresh surface ready for use in a new assay. The proposed electrode was successfully applied in the quantification of amitrole in its commercial formulation as well as in tap water samples.
- Full Text:
- Date Issued: 2006
Electrochemical properties of benzylmercapto and dodecylmercapto tetra substituted nickel phthalocyanine complexes: Electrocatalytic oxidation of nitrite
- Agboola, Bolade O, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade O , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6562 , http://hdl.handle.net/10962/d1003826
- Description: Nickel tetrakis(benzylmercapto)phthalocyanine (NiTBMPc) and nickel tetrakis(dodecylmercapto)phthalocyanine (NiTDMPc) complexes were synthesized and their spectral and electrochemical properties reported. The CV showed four or five redox processes for NiTBMPc and NiTDMPc, respectively. For the first time, spectroelectrochemistry gave evidence for the formation of NiII/NiI process in a NiPc complex. The rest of the processes were ring based. The NiTBMPc complex was successfully deposited on both gold and glassy carbon electrodes by electropolymerisation while NiTDMPc complex was deposited on gold electrode only. The films were electro-transformed in aqueous 0.1 M NaOH solution to the O–Ni–O oxo bridged form. The modified electrodes were characterized using electrochemical impedance spectroscopy and the results showed typical behavior for modified electrodes. Electrodes with poly-Ni(OH)Pcs films exhibited higher charge transfer resistance values, Rp than their corresponding poly-NiPcs films counterparts. All the modified electrodes showed improved catalytic activities than the unmodified electrodes towards nitrite ions electrooxidation. Better catalytic activities were observed for the modified electrodes when they were transformed to O–Ni–O oxo bridge form. All the modified electrodes exhibited high resistance to electrode surface passivation.
- Full Text:
- Date Issued: 2006
- Authors: Agboola, Bolade O , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6562 , http://hdl.handle.net/10962/d1003826
- Description: Nickel tetrakis(benzylmercapto)phthalocyanine (NiTBMPc) and nickel tetrakis(dodecylmercapto)phthalocyanine (NiTDMPc) complexes were synthesized and their spectral and electrochemical properties reported. The CV showed four or five redox processes for NiTBMPc and NiTDMPc, respectively. For the first time, spectroelectrochemistry gave evidence for the formation of NiII/NiI process in a NiPc complex. The rest of the processes were ring based. The NiTBMPc complex was successfully deposited on both gold and glassy carbon electrodes by electropolymerisation while NiTDMPc complex was deposited on gold electrode only. The films were electro-transformed in aqueous 0.1 M NaOH solution to the O–Ni–O oxo bridged form. The modified electrodes were characterized using electrochemical impedance spectroscopy and the results showed typical behavior for modified electrodes. Electrodes with poly-Ni(OH)Pcs films exhibited higher charge transfer resistance values, Rp than their corresponding poly-NiPcs films counterparts. All the modified electrodes showed improved catalytic activities than the unmodified electrodes towards nitrite ions electrooxidation. Better catalytic activities were observed for the modified electrodes when they were transformed to O–Ni–O oxo bridge form. All the modified electrodes exhibited high resistance to electrode surface passivation.
- Full Text:
- Date Issued: 2006
Electropolymerizable iron (III) and cobalt (II) dicyanophenoxy tetraphenylporphyrin complexes
- Ozoemena, Kenneth I, Zhao, Zhixin, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286080 , vital:56236 , xlink:href="https://doi.org/10.1016/j.inoche.2005.11.024"
- Description: Solution and solid phase electrochemical features of 5-[4-(3,4-dicyanophenoxy)phenyl],10,15,20-triphenylporphyrin complexes of iron(III) (FeCNOTPP(Cl)) and cobalt(II) (CoCNOTPP) have been described. These novel asymmetric dicyanophenoxy-derivatised cobalt and iron porphyrin complexes were electropolymerised onto glassy carbon electrodes, which in aqueous solutions, gave surface concentrations (ca. 10−10 mol cm−2) typical of monolayer coverages. The films also exhibited excellent stability and electrocatalysis towards the direct detection of important analytes as nitrite, nitric oxide, and hydrogen peroxide in aqueous solutions.
- Full Text:
- Date Issued: 2006
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286080 , vital:56236 , xlink:href="https://doi.org/10.1016/j.inoche.2005.11.024"
- Description: Solution and solid phase electrochemical features of 5-[4-(3,4-dicyanophenoxy)phenyl],10,15,20-triphenylporphyrin complexes of iron(III) (FeCNOTPP(Cl)) and cobalt(II) (CoCNOTPP) have been described. These novel asymmetric dicyanophenoxy-derivatised cobalt and iron porphyrin complexes were electropolymerised onto glassy carbon electrodes, which in aqueous solutions, gave surface concentrations (ca. 10−10 mol cm−2) typical of monolayer coverages. The films also exhibited excellent stability and electrocatalysis towards the direct detection of important analytes as nitrite, nitric oxide, and hydrogen peroxide in aqueous solutions.
- Full Text:
- Date Issued: 2006
Novel amperometric glucose biosensor based on an ether-linked cobalt(II) phthalocyaninecobalt(II) tetraphenylporphyrin pentamer as a redox mediator
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6583 , http://hdl.handle.net/10962/d1004148
- Description: The development of cobalt(II) phthalocyanine–cobalt(II) tetra(5-phenoxy-10,15,20-triphenylporphyrin), (CoPc–(CoTPP)[subscript 4]) pentamer as a novel redox mediator for amperometric enzyme electrode sensitive to glucose is described. A glassy carbon electrode (GCE) was first modified with the pentamer, then followed by the immobilization onto the GCE–CoPc–(CoTPP)[subscript 4] with glucose oxidase (GOx) through cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) and Nafion® cation-exchange polymer. The proposed biosensor displayed good amperometric respose charateristics to glucose in pH 7.0 PBS solution; such as low overpotentials (+400 mV versus Ag|AgCl), very fast amperometric response time (~5 s), linear concentration range extended up to 11 mM, with 10 μM detection limit. The biosensor exhibited electrochemical Michaelis–Menten kinetics and showed an average apparent Michaelis–Menten constant (K′M) of 14.91 ± 0.46 mM over a storage period of 2 weeks.
- Full Text:
- Date Issued: 2006
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6583 , http://hdl.handle.net/10962/d1004148
- Description: The development of cobalt(II) phthalocyanine–cobalt(II) tetra(5-phenoxy-10,15,20-triphenylporphyrin), (CoPc–(CoTPP)[subscript 4]) pentamer as a novel redox mediator for amperometric enzyme electrode sensitive to glucose is described. A glassy carbon electrode (GCE) was first modified with the pentamer, then followed by the immobilization onto the GCE–CoPc–(CoTPP)[subscript 4] with glucose oxidase (GOx) through cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) and Nafion® cation-exchange polymer. The proposed biosensor displayed good amperometric respose charateristics to glucose in pH 7.0 PBS solution; such as low overpotentials (+400 mV versus Ag|AgCl), very fast amperometric response time (~5 s), linear concentration range extended up to 11 mM, with 10 μM detection limit. The biosensor exhibited electrochemical Michaelis–Menten kinetics and showed an average apparent Michaelis–Menten constant (K′M) of 14.91 ± 0.46 mM over a storage period of 2 weeks.
- Full Text:
- Date Issued: 2006
Preferential electrosorption of cobalt (II) tetra-aminophthalocyanine at single-wall carbon nanotubes immobilized on a basal plane pyrolytic graphite electrode
- Ozoemena, Kenneth I, Pillay, J, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Pillay, J , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6584 , http://hdl.handle.net/10962/d1004160
- Description: This communication describes the preferential electrosorption of cobalt (II) tetra-aminophthalocyanine (CoTAPc) (rather than the expected electropolymerisation) onto a SWCNT immobilized on a basal plane pyrolytic graphite electrode (BPPGE). Cyclic voltammetric and electrochemical impedance spectroscopic data revealed that the electrosorbed CoTAPc is highly stable, well organized with comparable electron-transfer rate constant in ferricyanide solution (k[subscript app] ~ 6 × 10[superscript (−5)] cm s[superscript (−1)] order) to that of the SWNCT. Electrochemical kinetics of the electrosorbed CoTAPc yielded k[subscript s] of 0.169 s[superscript (−1)] and 832.2 s[superscript (−1)] for the cathodic and anodic reactions, respectively, indicative of different rate-determining steps for the cathodic and anodic reactions. Strong π-stacking interactions between CoTAPc and the sidewalls of the SWCNTs, with possible synergistic covalent interactions, are explained as responsible for the preferential electrosorption process. Both BPPGE-SWCNT-CoTAPc[subscript (ads)] and BPPGE-SWCNT showed comparable electrocatalytic responses towards the detection of 2-(diethylamino) ethanethiol (DEAET).
- Full Text:
- Date Issued: 2006
- Authors: Ozoemena, Kenneth I , Pillay, J , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6584 , http://hdl.handle.net/10962/d1004160
- Description: This communication describes the preferential electrosorption of cobalt (II) tetra-aminophthalocyanine (CoTAPc) (rather than the expected electropolymerisation) onto a SWCNT immobilized on a basal plane pyrolytic graphite electrode (BPPGE). Cyclic voltammetric and electrochemical impedance spectroscopic data revealed that the electrosorbed CoTAPc is highly stable, well organized with comparable electron-transfer rate constant in ferricyanide solution (k[subscript app] ~ 6 × 10[superscript (−5)] cm s[superscript (−1)] order) to that of the SWNCT. Electrochemical kinetics of the electrosorbed CoTAPc yielded k[subscript s] of 0.169 s[superscript (−1)] and 832.2 s[superscript (−1)] for the cathodic and anodic reactions, respectively, indicative of different rate-determining steps for the cathodic and anodic reactions. Strong π-stacking interactions between CoTAPc and the sidewalls of the SWCNTs, with possible synergistic covalent interactions, are explained as responsible for the preferential electrosorption process. Both BPPGE-SWCNT-CoTAPc[subscript (ads)] and BPPGE-SWCNT showed comparable electrocatalytic responses towards the detection of 2-(diethylamino) ethanethiol (DEAET).
- Full Text:
- Date Issued: 2006
Self-assembled monolayers (SAMs) of cobalt tetracarboxylic acidchloride phthalocyanine covalently attached onto a preformed mercaptoethanol SAM
- Mashazi, Philani N, Ozoemena, Kenneth I, Maree, David M, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006
Synthesis and electrochemical characterisation of benzylmercapto and dodecylmercapto tetra substituted cobalt, iron, and zinc phthalocyanines complexes
- Nyokong, Tebello, Ozoemena, Kenneth I, Agboola, Bolade O
- Authors: Nyokong, Tebello , Ozoemena, Kenneth I , Agboola, Bolade O
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6580 , http://hdl.handle.net/10962/d1004143
- Description: The work reports on cyclic voltammetry (CV), square wave voltammetry and spectroelectrochemistry of the following complexes: tetrakis (benzyl mercapto) phthalocyanine complexes of Zn(II) (ZnTBMPc, 4a ), Co(II) (CoTBMPc, 5a ), Fe(II) (FeTBMPc 6a ); and tetrakis (dodecylmercapto) phthalocyanine complexes of Zn(II) (ZnTDMPc, 4b), Co(II) (CoTDMPc, 5b) and Fe(II) (FeTDMPc, 6b). More reversible CV couples were observed for complexes 4a, 5a and 6a containing thiol phenyl ring substituents. Complexes 4b, 5b and 6b containing long chain thiol substituents showed less reversible couples. Complexes 6a and 6b showed a relatively large number of redox processes (5 for 6a and 6 for 6b) within the potential window employed in this work. The processes for FePc derivatives (6a) are assigned to FeIIIPc-1/FeIIIPc-2, FeIIIPc-2/FeIIPc-2, FeIIPc-2/FeIPc-2, FeIPc-2/FeIPc-3 and FeIPc-3/FeIPc-4 and for the CoPc derivative (5a) to CoIIIPc-1/CoIIIPc-2, CoIIIPc-2/CoIIPc-2, CoIIPc-2/CoIPc-2 and CoIPc-2/CoIPc-3.
- Full Text:
- Date Issued: 2006
- Authors: Nyokong, Tebello , Ozoemena, Kenneth I , Agboola, Bolade O
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6580 , http://hdl.handle.net/10962/d1004143
- Description: The work reports on cyclic voltammetry (CV), square wave voltammetry and spectroelectrochemistry of the following complexes: tetrakis (benzyl mercapto) phthalocyanine complexes of Zn(II) (ZnTBMPc, 4a ), Co(II) (CoTBMPc, 5a ), Fe(II) (FeTBMPc 6a ); and tetrakis (dodecylmercapto) phthalocyanine complexes of Zn(II) (ZnTDMPc, 4b), Co(II) (CoTDMPc, 5b) and Fe(II) (FeTDMPc, 6b). More reversible CV couples were observed for complexes 4a, 5a and 6a containing thiol phenyl ring substituents. Complexes 4b, 5b and 6b containing long chain thiol substituents showed less reversible couples. Complexes 6a and 6b showed a relatively large number of redox processes (5 for 6a and 6 for 6b) within the potential window employed in this work. The processes for FePc derivatives (6a) are assigned to FeIIIPc-1/FeIIIPc-2, FeIIIPc-2/FeIIPc-2, FeIIPc-2/FeIPc-2, FeIPc-2/FeIPc-3 and FeIPc-3/FeIPc-4 and for the CoPc derivative (5a) to CoIIIPc-1/CoIIIPc-2, CoIIIPc-2/CoIIPc-2, CoIIPc-2/CoIPc-2 and CoIPc-2/CoIPc-3.
- Full Text:
- Date Issued: 2006
Tetracarboxylic acid cobalt phthalocyanine SAM on gold: Potential applications as amperometric sensor for H2O2 and fabrication of glucose biosensor
- Mashazi, Philani N, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
- Date Issued: 2006
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
- Date Issued: 2006
Insights into the surface and redox properties of single-walled carbon nanotube—cobalt (II) tetra-aminophthalocyanine self-assembled on gold electrode
- Ozoemena, Kenneth I, Nyokong, Tebello, Nkosi, Duduzile, Chambrier, Isabelle, Cook, Michael J
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello , Nkosi, Duduzile , Chambrier, Isabelle , Cook, Michael J
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281258 , vital:55707 , xlink:href="https://doi.org/10.1016/j.electacta.2006.11.039"
- Description: This paper describes for the first time the electrochemical properties of redox-active self-assembled films of single-walled carbon nanotubes (SWCNTs) coordinated to cobalt(II)tetra-aminophthalocyanine (CoTAPc) by sequential self-assembly onto a preformed aminoethanethiol (AET) self-assembled monolayer (SAM) on a gold electrode. Both redox-active SAMs (Au-AET-SWCNT and Au-AET-SWCNT-CoTAPc) exhibited reversible electrochemistry in aqueous (phosphate buffer) solution. X-ray photoelectron spectroscopy (XPS) confirmed the appearance on the gold surface of the various elements found on the SAMs. Atomic force microscopy (AFM) images prove, corroborating the estimated electrochemical surface concentrations, that these SAMs lie normal to the gold surface. Electrochemical impedance spectroscopy (EIS) analyses in the presence of [Fe(CN)6]3−/4− as a redox probe revealed that the Au-AET-SWCNT-CoTAPc showed much lower (∼10 times) electron-transfer resistance (Ret) and much higher (∼10 times) apparent electron-transfer rate constant (kapp) compared to the Au-AET-SWCNT SAM. Interestingly, a preliminary electrocatalytic investigation showed that both SAMs exhibit comparable electrocatalytic responses towards the detection of dopamine in pH 7.4 phosphate buffer solutions (PBS). The electrochemical studies (cyclic voltammetry (CV) and EIS) prove that SWCNT greatly improves the electronic communication between CoTAPc and the Au electrode surface.
- Full Text:
- Date Issued: 2007
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello , Nkosi, Duduzile , Chambrier, Isabelle , Cook, Michael J
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281258 , vital:55707 , xlink:href="https://doi.org/10.1016/j.electacta.2006.11.039"
- Description: This paper describes for the first time the electrochemical properties of redox-active self-assembled films of single-walled carbon nanotubes (SWCNTs) coordinated to cobalt(II)tetra-aminophthalocyanine (CoTAPc) by sequential self-assembly onto a preformed aminoethanethiol (AET) self-assembled monolayer (SAM) on a gold electrode. Both redox-active SAMs (Au-AET-SWCNT and Au-AET-SWCNT-CoTAPc) exhibited reversible electrochemistry in aqueous (phosphate buffer) solution. X-ray photoelectron spectroscopy (XPS) confirmed the appearance on the gold surface of the various elements found on the SAMs. Atomic force microscopy (AFM) images prove, corroborating the estimated electrochemical surface concentrations, that these SAMs lie normal to the gold surface. Electrochemical impedance spectroscopy (EIS) analyses in the presence of [Fe(CN)6]3−/4− as a redox probe revealed that the Au-AET-SWCNT-CoTAPc showed much lower (∼10 times) electron-transfer resistance (Ret) and much higher (∼10 times) apparent electron-transfer rate constant (kapp) compared to the Au-AET-SWCNT SAM. Interestingly, a preliminary electrocatalytic investigation showed that both SAMs exhibit comparable electrocatalytic responses towards the detection of dopamine in pH 7.4 phosphate buffer solutions (PBS). The electrochemical studies (cyclic voltammetry (CV) and EIS) prove that SWCNT greatly improves the electronic communication between CoTAPc and the Au electrode surface.
- Full Text:
- Date Issued: 2007