A highly selective and sensitive pyridylazo-2-naphthol-poly (acrylic acid) functionalized electrospun nanofiber fluorescence “turn-off” chemosensory system for Ni 2+
- Adewuyi, Sheriff, Ondigo, Dezzline A, Zugle, Ruphino, Tshentu, Zenixole R, Nyokong, Tebello, Torto, Nelson
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole R , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole R , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
An ion-imprinted polymer for the selective extraction of mercury(II) ions in aqueous media
- Batlokwa, Bareki Shima, Chimuka, Luke, Tshentu, Zenixole R, Cukrowska, Ewa, Torto, Nelson
- Authors: Batlokwa, Bareki Shima , Chimuka, Luke , Tshentu, Zenixole R , Cukrowska, Ewa , Torto, Nelson
- Date: 2012
- Language: English
- Type: Article
- Identifier: vital:6566 , http://hdl.handle.net/10962/d1004125
- Description: A double-imprinted polymer exhibiting high sensitivity for mercury(II) in aqueous solution is presented. Polymer particles imprinted with mercury(II) were synthesised by copolymerising the functional and cross-linking monomers, N’–[3– (Trimethoxysilyl)–propyl]diethylenetriamine (TPET) and tetraethylorthosilicate (TEOS). A double-imprinting procedure employing hexadecyltrimethylammonium bromide (CTAB), as a second template to improve the efficiency of the polymer, was adopted. The imprinted polymer was characterised by FTIR, scanning electron microscopy (SEM) and the average size determined by screen analysis using standard test sieves. Relative selective coefficients (k`) of the imprinted polymer evaluated from selective binding studies between Hg2+ and Cu2+ or Hg2+ and Cd2+ were 10 588 and 3 147, respectively. These values indicated highly-favoured Hg2+ extractions over the 2 competing ions. The results of spiked and real water samples showed high extraction efficiencies of Hg2+ ions, (over 84%) as evaluated from the detected unextracted Hg2+ ions by ICP-OES. The method exhibited a dynamic response concentration range for Hg2+ between 0.01 and 20 μg/mℓ, with a detection limit (LOD, 3σ) of 0.000036 μg/mℓ (36 ng/ℓ) that meets the monitoring requirements for the USA EPA of 2 000 ng/ℓ for Hg2+ in drinking water. Generally, the data (n=10) had percentage relative standard deviations (%RSD) of less than 4%. Satisfactory results were also obtained when the prepared sorbent was applied for the pre-concentration of Hg2+ from an aqueous certified reference material. These findings indicate that the double-imprinted polymer has potential to be used as an efficient extraction material for the selective pre–concentration of mercury(II) ions in aqueous environments.
- Full Text:
- Date Issued: 2012
- Authors: Batlokwa, Bareki Shima , Chimuka, Luke , Tshentu, Zenixole R , Cukrowska, Ewa , Torto, Nelson
- Date: 2012
- Language: English
- Type: Article
- Identifier: vital:6566 , http://hdl.handle.net/10962/d1004125
- Description: A double-imprinted polymer exhibiting high sensitivity for mercury(II) in aqueous solution is presented. Polymer particles imprinted with mercury(II) were synthesised by copolymerising the functional and cross-linking monomers, N’–[3– (Trimethoxysilyl)–propyl]diethylenetriamine (TPET) and tetraethylorthosilicate (TEOS). A double-imprinting procedure employing hexadecyltrimethylammonium bromide (CTAB), as a second template to improve the efficiency of the polymer, was adopted. The imprinted polymer was characterised by FTIR, scanning electron microscopy (SEM) and the average size determined by screen analysis using standard test sieves. Relative selective coefficients (k`) of the imprinted polymer evaluated from selective binding studies between Hg2+ and Cu2+ or Hg2+ and Cd2+ were 10 588 and 3 147, respectively. These values indicated highly-favoured Hg2+ extractions over the 2 competing ions. The results of spiked and real water samples showed high extraction efficiencies of Hg2+ ions, (over 84%) as evaluated from the detected unextracted Hg2+ ions by ICP-OES. The method exhibited a dynamic response concentration range for Hg2+ between 0.01 and 20 μg/mℓ, with a detection limit (LOD, 3σ) of 0.000036 μg/mℓ (36 ng/ℓ) that meets the monitoring requirements for the USA EPA of 2 000 ng/ℓ for Hg2+ in drinking water. Generally, the data (n=10) had percentage relative standard deviations (%RSD) of less than 4%. Satisfactory results were also obtained when the prepared sorbent was applied for the pre-concentration of Hg2+ from an aqueous certified reference material. These findings indicate that the double-imprinted polymer has potential to be used as an efficient extraction material for the selective pre–concentration of mercury(II) ions in aqueous environments.
- Full Text:
- Date Issued: 2012
Introducing chemistry students to the “real world” of chemistry
- Brown, Michael E, Cosser, Ronald C, Davies-Coleman, Michael T, Kaye, Perry T, Klein, Rosalyn, Lamprecht, Emmanuel, Lobb, Kevin A, Nyokong, Tebello, Sewry, Joyce D, Tshentu, Zenixole R, Van der Zeyde, Tino, Watkins, Gareth M
- Authors: Brown, Michael E , Cosser, Ronald C , Davies-Coleman, Michael T , Kaye, Perry T , Klein, Rosalyn , Lamprecht, Emmanuel , Lobb, Kevin A , Nyokong, Tebello , Sewry, Joyce D , Tshentu, Zenixole R , Van der Zeyde, Tino , Watkins, Gareth M
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/449360 , vital:74814 , xlink:href="https://doi.org/10.1021/ed8001539"
- Description: A majority of chemistry graduates seek employment in a rapidly changing chemical industry. Our attempts to provide the graduates with skills in entrepreneurship and the ability to understand and communicate with their chemical engineering colleagues, in addition to their fundamental knowledge of chemistry, are described. This is done at second-year level with practical projects in which student teams formulate and prepare relatively simple chemical products for marketing, followed a year later by a more advanced study of the feasibility of producing and marketing a fine chemical on a commercial scale.
- Full Text:
- Date Issued: 2010
- Authors: Brown, Michael E , Cosser, Ronald C , Davies-Coleman, Michael T , Kaye, Perry T , Klein, Rosalyn , Lamprecht, Emmanuel , Lobb, Kevin A , Nyokong, Tebello , Sewry, Joyce D , Tshentu, Zenixole R , Van der Zeyde, Tino , Watkins, Gareth M
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/449360 , vital:74814 , xlink:href="https://doi.org/10.1021/ed8001539"
- Description: A majority of chemistry graduates seek employment in a rapidly changing chemical industry. Our attempts to provide the graduates with skills in entrepreneurship and the ability to understand and communicate with their chemical engineering colleagues, in addition to their fundamental knowledge of chemistry, are described. This is done at second-year level with practical projects in which student teams formulate and prepare relatively simple chemical products for marketing, followed a year later by a more advanced study of the feasibility of producing and marketing a fine chemical on a commercial scale.
- Full Text:
- Date Issued: 2010
Adsorption and separation of platinum and palladium by polyamine functionalized polystyrene-based beads and nanofibers
- Fayemi, Omolola E, Ogunlaja, Adeniyi S, Kempgens, Pierre F M, Antunes, Edith M, Torto, Nelson, Nyokong, Tebello, Tshentu, Zenixole R
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Kempgens, Pierre F M , Antunes, Edith M , Torto, Nelson , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241694 , vital:50961 , xlink:href="https://doi.org/10.1016/j.mineng.2013.06.006"
- Description: Adsorption and separation of platinum and palladium chlorido species (PtCl62- and PdCl42-) on polystyrene beads as well as nanofibers functionalized with ammonium centres based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and tris-(2-aminoethyl)amine (TAEA) are described. The functionalized sorbent materials were characterized by microanalysis, SEM, XPS, BET and FTIR. The surface area of the functionalized fibers was in the range 69–241 m2/g while it was 73–107 m2/g for the beads. The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies at 1 M HCl concentration. The adsorption studies for both PtCl62- and PdCl42- on the different sorbent materials fit the Langmuir isotherm with R2 values >0.99. The highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively for the nanofiber sorbent material based on ethylenediamine (EDA) while the beads with ethylenediamine (EDA) gave 1.0 mg/g and 0.2 mg/g for Pt and Pd respectively. Metals loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as the eluting agent with quantitative desorption efficiency under the selected experimental conditions. Separation of platinum from palladium was partially achieved by selective stripping of PtCl62- with 0.5 M of NaClO4 in 1.0 M HCl while PdCl42- was eluted with 0.5 M thiourea in 1.0 M HCl. Separation of platinum from iridium and rhodium under 1 M HCl concentration was successful on triethylenetriamine (TETA)-functionalized Merrifield beads. This material (M-TETA) showed selectivity for platinum albeit the low loading capacity.
- Full Text:
- Date Issued: 2013
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Kempgens, Pierre F M , Antunes, Edith M , Torto, Nelson , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241694 , vital:50961 , xlink:href="https://doi.org/10.1016/j.mineng.2013.06.006"
- Description: Adsorption and separation of platinum and palladium chlorido species (PtCl62- and PdCl42-) on polystyrene beads as well as nanofibers functionalized with ammonium centres based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and tris-(2-aminoethyl)amine (TAEA) are described. The functionalized sorbent materials were characterized by microanalysis, SEM, XPS, BET and FTIR. The surface area of the functionalized fibers was in the range 69–241 m2/g while it was 73–107 m2/g for the beads. The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies at 1 M HCl concentration. The adsorption studies for both PtCl62- and PdCl42- on the different sorbent materials fit the Langmuir isotherm with R2 values >0.99. The highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively for the nanofiber sorbent material based on ethylenediamine (EDA) while the beads with ethylenediamine (EDA) gave 1.0 mg/g and 0.2 mg/g for Pt and Pd respectively. Metals loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as the eluting agent with quantitative desorption efficiency under the selected experimental conditions. Separation of platinum from palladium was partially achieved by selective stripping of PtCl62- with 0.5 M of NaClO4 in 1.0 M HCl while PdCl42- was eluted with 0.5 M thiourea in 1.0 M HCl. Separation of platinum from iridium and rhodium under 1 M HCl concentration was successful on triethylenetriamine (TETA)-functionalized Merrifield beads. This material (M-TETA) showed selectivity for platinum albeit the low loading capacity.
- Full Text:
- Date Issued: 2013
The development of palladium (II)-specific amine-functionalized silica-based microparticles
- Fayemi, Omolola E, Ogunlaja, Adeniyi S, Antunes, Edith M, Nyokong, Tebello, Tshentu, Zenixole R
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241083 , vital:50903 , xlink:href="https://doi.org/10.1080/01496395.2014.978017"
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources.
- Full Text:
- Date Issued: 2015
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241083 , vital:50903 , xlink:href="https://doi.org/10.1080/01496395.2014.978017"
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources.
- Full Text:
- Date Issued: 2015
The Development of Palladium(II)-Specific Amine-Functionalized Silica-Based Microparticles: Adsorption and Column Separation Studies
- Fayemi, Omolola E, Ogunlaja, Adeniyi S, Antunes, Edith M, Nyokong, Tebello, Tshentu, Zenixole R
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7269 , http://hdl.handle.net/10962/d1020278
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7269 , http://hdl.handle.net/10962/d1020278
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
The development of Palladium(II)-specific amine-functionalized silica-based microparticles : adsorption and column separation studies
- Fayemi, Omolola E, Ogunlaja, Adeniyi S, Antunes, Edith M, Nyokong, Tebello, Tshentu, Zenixole R
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7270 , http://hdl.handle.net/10962/d1020285
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7270 , http://hdl.handle.net/10962/d1020285
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
Syntheses, protonation constants and antimicrobial activity of 2-substituted N-alkylimidazole derivatives
- Kleyi, Phumelele, Walmsley, Ryan S, Gundhla, Isaac Z, Walmsley, Tara A, Jauka, Tembisa I, Dames, Joanna F, Walker, Roderick B, Torto, Nelson, Tshentu, Zenixole R
- Authors: Kleyi, Phumelele , Walmsley, Ryan S , Gundhla, Isaac Z , Walmsley, Tara A , Jauka, Tembisa I , Dames, Joanna F , Walker, Roderick B , Torto, Nelson , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184066 , vital:44165 , xlink:href="https://www.ajol.info/index.php/sajc/article/view/123858"
- Description: A series of N-alkylimidazole-2-carboxylic acid, N-alkylimidazole-2-carboxaldehyde and N-alkylimidazole-2-methanol derivatives [alkyl = benzyl, methyl, ethyl, propyl, butyl, heptyl, octyl and decyl] have been synthesized and the protonation constants determined. The antimicrobial properties of the compounds were tested against Gram-negative (Escherichi coli), Gram-positive (Staphylococcus aureus and Bacillus subtilis subsp. spizizenii) bacterial strains and yeast (C. albicans). Both the disk diffusion and broth microdilution methods for testing the antimicrobial activity showed that N-alkylation of imidazole with longer alkyl chains and the substitution with low pKa group at 2-position resulted in enhanced antimicrobial activity. Particularly, the N-alkylimidazole-2-carboxylic acids exhibited the best antimicrobial activity due to the low pKa of the carboxylic acid moiety. Generally, all the N-alkylimidazole derivatives were most active against the Gram-positive bacteria [S. aureus (MIC = 5–160 µg mL–1) and B. subtilis subsp. spizizenii (5–20 µg mL–1)], with the latter more susceptible. All the compounds showed poor antimicrobial activity against both Gram-negative (E. coli, MIC = 0.15 to >2500 µg mL–1) bacteria and all the compounds were inactive against the yeast (Candida albicans).
- Full Text:
- Date Issued: 2012
- Authors: Kleyi, Phumelele , Walmsley, Ryan S , Gundhla, Isaac Z , Walmsley, Tara A , Jauka, Tembisa I , Dames, Joanna F , Walker, Roderick B , Torto, Nelson , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184066 , vital:44165 , xlink:href="https://www.ajol.info/index.php/sajc/article/view/123858"
- Description: A series of N-alkylimidazole-2-carboxylic acid, N-alkylimidazole-2-carboxaldehyde and N-alkylimidazole-2-methanol derivatives [alkyl = benzyl, methyl, ethyl, propyl, butyl, heptyl, octyl and decyl] have been synthesized and the protonation constants determined. The antimicrobial properties of the compounds were tested against Gram-negative (Escherichi coli), Gram-positive (Staphylococcus aureus and Bacillus subtilis subsp. spizizenii) bacterial strains and yeast (C. albicans). Both the disk diffusion and broth microdilution methods for testing the antimicrobial activity showed that N-alkylation of imidazole with longer alkyl chains and the substitution with low pKa group at 2-position resulted in enhanced antimicrobial activity. Particularly, the N-alkylimidazole-2-carboxylic acids exhibited the best antimicrobial activity due to the low pKa of the carboxylic acid moiety. Generally, all the N-alkylimidazole derivatives were most active against the Gram-positive bacteria [S. aureus (MIC = 5–160 µg mL–1) and B. subtilis subsp. spizizenii (5–20 µg mL–1)], with the latter more susceptible. All the compounds showed poor antimicrobial activity against both Gram-negative (E. coli, MIC = 0.15 to >2500 µg mL–1) bacteria and all the compounds were inactive against the yeast (Candida albicans).
- Full Text:
- Date Issued: 2012
Photodynamic inactivation of Staphylococcus aureus using low symmetrically substituted phthalocyanines supported on a polystyrene polymer fiber
- Masilela, Nkosiphile, Kleyi, Phumelele, Tshentu, Zenixole R, Priniotakis, Georgios, Westbroek, Philippe, Nyokong, Tebello
- Authors: Masilela, Nkosiphile , Kleyi, Phumelele , Tshentu, Zenixole R , Priniotakis, Georgios , Westbroek, Philippe , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7330 , http://hdl.handle.net/10962/d1020591
- Description: This work reports on the antimicrobial photo-activities of a series of low symmetrically substituted phthalocyanine complexes in solution and in a fiber matrix. Phthalocyanine complexes were successfully electrospun into a polystyrene polymer. The fiber diameter ranged from 240 nm to 390 nm in average. The modified polymer fiber showed successful singlet oxygen production with the Ge monocarboxy phthalocyanine modified fiber giving the highest singlet oxygen quantum yield value of 0.46 due to lack of aggregation when in the polymer. All the unsymmetrically substituted complexes showed antimicrobial activity towards S. Aureus under illumination with visible light. The symmetrical ZnPc and ZnTPCPc showed no activity under illumination with light in the fiber matrix due to low singlet oxygen production. , Original publication is available at http://dx.doi.org/10.1016/j.dyepig.2012.10.001
- Full Text: false
- Authors: Masilela, Nkosiphile , Kleyi, Phumelele , Tshentu, Zenixole R , Priniotakis, Georgios , Westbroek, Philippe , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7330 , http://hdl.handle.net/10962/d1020591
- Description: This work reports on the antimicrobial photo-activities of a series of low symmetrically substituted phthalocyanine complexes in solution and in a fiber matrix. Phthalocyanine complexes were successfully electrospun into a polystyrene polymer. The fiber diameter ranged from 240 nm to 390 nm in average. The modified polymer fiber showed successful singlet oxygen production with the Ge monocarboxy phthalocyanine modified fiber giving the highest singlet oxygen quantum yield value of 0.46 due to lack of aggregation when in the polymer. All the unsymmetrically substituted complexes showed antimicrobial activity towards S. Aureus under illumination with visible light. The symmetrical ZnPc and ZnTPCPc showed no activity under illumination with light in the fiber matrix due to low singlet oxygen production. , Original publication is available at http://dx.doi.org/10.1016/j.dyepig.2012.10.001
- Full Text: false
Synthesis, photophysics and photochemistry of phthalocyanine-ɛ-polylysine conjugates in the presence of metal nanoparticles against Staphylococcus aureus
- Nombona, Nolwazi, Antunes, Edith M, Chidawanyika, Wadzanai J U, Kleyi, Phumelele, Tshentu, Zenixole R, Nyokong, Tebello
- Authors: Nombona, Nolwazi , Antunes, Edith M , Chidawanyika, Wadzanai J U , Kleyi, Phumelele , Tshentu, Zenixole R , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244439 , vital:51257 , xlink:href="https://doi.org/10.1016/j.molstruc.2015.02.040"
- Description: This work reports on the photodynamic activity of Zn phthalocyanine-ɛ-polylysine conjugates in the presence of gold and silver nanoparticles (NPs) towards the inactivation of Staphylococcus aureus (S. aureus). The conjugates showed high photoinactivation with ∼6% growth at a drug dose of 3 μM and fluence of 39.6 mW/cm2 for 10 min irradiation time in the presence of silver nanoparticles. The presence of silver nanoparticels from the minimal inhibition concentration (MIC50) studies showed remarkable growth inhibition for the tested conjugates even at low concentrations. The MIC50 was lowest for the conjugate of 3 with ɛ-polylysine at concentrations of less than 0.0058 μM in the presence of AgNPs. The lethal photosensitization of microorganisms has emerged as a promising treatment since bacteria have reduced possibilities of developing resistance to photodynamic therapy.
- Full Text:
- Date Issued: 2015
- Authors: Nombona, Nolwazi , Antunes, Edith M , Chidawanyika, Wadzanai J U , Kleyi, Phumelele , Tshentu, Zenixole R , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244439 , vital:51257 , xlink:href="https://doi.org/10.1016/j.molstruc.2015.02.040"
- Description: This work reports on the photodynamic activity of Zn phthalocyanine-ɛ-polylysine conjugates in the presence of gold and silver nanoparticles (NPs) towards the inactivation of Staphylococcus aureus (S. aureus). The conjugates showed high photoinactivation with ∼6% growth at a drug dose of 3 μM and fluence of 39.6 mW/cm2 for 10 min irradiation time in the presence of silver nanoparticles. The presence of silver nanoparticels from the minimal inhibition concentration (MIC50) studies showed remarkable growth inhibition for the tested conjugates even at low concentrations. The MIC50 was lowest for the conjugate of 3 with ɛ-polylysine at concentrations of less than 0.0058 μM in the presence of AgNPs. The lethal photosensitization of microorganisms has emerged as a promising treatment since bacteria have reduced possibilities of developing resistance to photodynamic therapy.
- Full Text:
- Date Issued: 2015
Reaction of Perrhenate with Phthalocyanine Derivatives in the Presence of Reducing Agents and Rhenium Oxide Nanoparticles in Biomedical Applications
- Ntsimango, Songeziwe, Gandidzanwa, Sendibitiyosi, Joseph, Sinelizwi V, Hosten, Eric C, Randall, Marvin, Edkins, Adrienne L, Khene, Samson M, Mashazi, Philani N, Nyokong, Tebello, Abrahams, Abubak’r, Tshentu, Zenixole R
- Authors: Ntsimango, Songeziwe , Gandidzanwa, Sendibitiyosi , Joseph, Sinelizwi V , Hosten, Eric C , Randall, Marvin , Edkins, Adrienne L , Khene, Samson M , Mashazi, Philani N , Nyokong, Tebello , Abrahams, Abubak’r , Tshentu, Zenixole R
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300257 , vital:57910 , xlink:href="https://doi.org/10.1002/open.202200037"
- Description: A novel alternative route to access rhenium(V)−phthalocyanine complexes through direct metalation of metal-free phthalocyanines (H2Pcs) with a rhenium(VII) salt in the presence of various two-electron reducing agents is presented. Direct ion metalation of tetraamino- or tetranitrophthalocyanine with perrhenate (ReO4−) in the presence of triphenylphosphine led to oxidative decomposition of the H2Pcs, giving their respective phthalonitriles. Conversely, treatment of H2Pcs with ReO4− employing sodium metabisulfite yielded the desired ReVO−Pc complex. Finally, reaction of H2Pcs with ReO4− and NaBH4 as reducing agent led to the formation of rhenium oxide (RexOy) nanoparticles (NPs). The NP synthesis was optimised, and the RexOy NPs were capped with folic acid (FA) conjugated with tetraaminophthalocyanine (TAPc) to enhance their cancer cell targeting ability. The cytotoxicity profile of the resultant RexOy−TAPc−FA NPs was assessed and found to be greater than 80 % viability in four cell lines, namely, MDA−MB-231, HCC7, HCC1806 and HEK293T. Non-cytotoxic concentrations were determined and employed in cancer cell localization studies. The particle size effect on localization of NPs was also investigated using confocal fluorescence and transmission electron microscopy. The smaller NPs (≈10 nm) were found to exhibit stronger fluorescence properties than the ≈50 nm NPs and exhibited better cell localization ability than the ≈50 nm NPs.
- Full Text:
- Date Issued: 2022
- Authors: Ntsimango, Songeziwe , Gandidzanwa, Sendibitiyosi , Joseph, Sinelizwi V , Hosten, Eric C , Randall, Marvin , Edkins, Adrienne L , Khene, Samson M , Mashazi, Philani N , Nyokong, Tebello , Abrahams, Abubak’r , Tshentu, Zenixole R
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300257 , vital:57910 , xlink:href="https://doi.org/10.1002/open.202200037"
- Description: A novel alternative route to access rhenium(V)−phthalocyanine complexes through direct metalation of metal-free phthalocyanines (H2Pcs) with a rhenium(VII) salt in the presence of various two-electron reducing agents is presented. Direct ion metalation of tetraamino- or tetranitrophthalocyanine with perrhenate (ReO4−) in the presence of triphenylphosphine led to oxidative decomposition of the H2Pcs, giving their respective phthalonitriles. Conversely, treatment of H2Pcs with ReO4− employing sodium metabisulfite yielded the desired ReVO−Pc complex. Finally, reaction of H2Pcs with ReO4− and NaBH4 as reducing agent led to the formation of rhenium oxide (RexOy) nanoparticles (NPs). The NP synthesis was optimised, and the RexOy NPs were capped with folic acid (FA) conjugated with tetraaminophthalocyanine (TAPc) to enhance their cancer cell targeting ability. The cytotoxicity profile of the resultant RexOy−TAPc−FA NPs was assessed and found to be greater than 80 % viability in four cell lines, namely, MDA−MB-231, HCC7, HCC1806 and HEK293T. Non-cytotoxic concentrations were determined and employed in cancer cell localization studies. The particle size effect on localization of NPs was also investigated using confocal fluorescence and transmission electron microscopy. The smaller NPs (≈10 nm) were found to exhibit stronger fluorescence properties than the ≈50 nm NPs and exhibited better cell localization ability than the ≈50 nm NPs.
- Full Text:
- Date Issued: 2022
Synthesis, characterization and biological activity of some Dithiourea Derivatives:
- Odame, Felix, Hosten, Eric C, Krause, Jason, Isaacs, Michelle, Hoppe, Heinrich C, Khanye, Setshaba D, Sayed, Yasien, Frost, Carminita L, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Krause, Jason , Isaacs, Michelle , Hoppe, Heinrich C , Khanye, Setshaba D , Sayed, Yasien , Frost, Carminita L , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163046 , vital:41007 , DOI: 10.17344/acsi.2019.5689
- Description: Novel dithiourea derivatives have been designed as HIV-1 protease inhibitors using Autodock 4.2, synthesized and characterized by spectroscopic methods and microanalysis.
- Full Text:
- Date Issued: 2020
- Authors: Odame, Felix , Hosten, Eric C , Krause, Jason , Isaacs, Michelle , Hoppe, Heinrich C , Khanye, Setshaba D , Sayed, Yasien , Frost, Carminita L , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163046 , vital:41007 , DOI: 10.17344/acsi.2019.5689
- Description: Novel dithiourea derivatives have been designed as HIV-1 protease inhibitors using Autodock 4.2, synthesized and characterized by spectroscopic methods and microanalysis.
- Full Text:
- Date Issued: 2020
Solvent promoted tautomerism in thione-containing tetraazatricyclics: evidence from 1H NMR spectroscopy and transition state studies
- Odame, Felix, Tshentu, Zenixole R, Lobb, Kevin A
- Authors: Odame, Felix , Tshentu, Zenixole R , Lobb, Kevin A
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/453198 , vital:75230 , xlink:href="https://link.springer.com/article/10.1007/s00894-022-05204-w"
- Description: Tautomerism in the nitro substituted thione-containing traazatricyclics has been investigated. Evidence from 1 H NMR indicating the existence of the tautomers has been augmented with computational studies providing evidence of the stability or otherwise of these tautomers. The role of water and DMSO in the formation of the tautomers has been explained. The role of the nitro group in assisting in the formation of the tautomers has been discussed.
- Full Text:
- Date Issued: 2022
- Authors: Odame, Felix , Tshentu, Zenixole R , Lobb, Kevin A
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/453198 , vital:75230 , xlink:href="https://link.springer.com/article/10.1007/s00894-022-05204-w"
- Description: Tautomerism in the nitro substituted thione-containing traazatricyclics has been investigated. Evidence from 1 H NMR indicating the existence of the tautomers has been augmented with computational studies providing evidence of the stability or otherwise of these tautomers. The role of water and DMSO in the formation of the tautomers has been explained. The role of the nitro group in assisting in the formation of the tautomers has been discussed.
- Full Text:
- Date Issued: 2022
Ultrasound promoted synthesis, characterization and computational studies of some thiourea derivatives
- Odame, Felix, Hosten, Eric C, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/451199 , vital:75028 , xlink:href="https://doi.org/10.1016/j.molstruc.2020.128302"
- Description: Synthesis of some thiourea derivatives have been achieved by using ultrasound, the compounds have been characterised using IR, NMR, GC-MS and elemental analysis. The single crystal X-ray structure of N-[(benzyloxy)methanethioyl]benzamide (IV), 1-benzoyl-3-(2-hydroxyethyl)thiourea (V) and 3-benzoyl-1-(1-benzylpiperidin-4-yl)thiourea (VI) has been presented and the bond lengths and bond angles contrasted with computed results. The HOMO and LUMO energy levels as well as the global chemical reactivity descriptors of the compounds have also been computed and discussed. Two comformers were obtained for compounds IV to VI in the molecular Electrostatic potential and the vibrational frequency computations and these have been discussed.
- Full Text:
- Date Issued: 2020
- Authors: Odame, Felix , Hosten, Eric C , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/451199 , vital:75028 , xlink:href="https://doi.org/10.1016/j.molstruc.2020.128302"
- Description: Synthesis of some thiourea derivatives have been achieved by using ultrasound, the compounds have been characterised using IR, NMR, GC-MS and elemental analysis. The single crystal X-ray structure of N-[(benzyloxy)methanethioyl]benzamide (IV), 1-benzoyl-3-(2-hydroxyethyl)thiourea (V) and 3-benzoyl-1-(1-benzylpiperidin-4-yl)thiourea (VI) has been presented and the bond lengths and bond angles contrasted with computed results. The HOMO and LUMO energy levels as well as the global chemical reactivity descriptors of the compounds have also been computed and discussed. Two comformers were obtained for compounds IV to VI in the molecular Electrostatic potential and the vibrational frequency computations and these have been discussed.
- Full Text:
- Date Issued: 2020
Synthesis, characterization, computational studies and DPPH scavenging activity of some triazatetracyclic derivatives
- Odame, Felix, Hosten, Eric C, Betz, Richard, Krause, Jason, Frost, Carminita L, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Krause, Jason , Frost, Carminita L , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/451186 , vital:75026 , xlink:href="https://doi.org/10.1007/s13738-021-02158-3"
- Description: Some dihydrobenzo[4,5]imidazo[1,2-c]quinazolines have been synthesized from aldehydes and ketones, using the ketones as both reagents and solvents and tetrahydrofuran (THF) as the solvent for the aldehydes, to yield the triazatetracyclics. The compounds have been characterized with spectroscopy and microanalysis. The crystal structures of 9,9-dimethyl-8,10,17- triazatetracyclo[8.7.02,7.011,16]heptadeca-1(17),2,4,6,11(16),12,14-heptaene (I), 9-butyl-9-methyl-8,10,17-triazatetracyclo[8.7.0.02 , 7 .011,16]heptadeca-(17),2,4,6,11(16),12,14-heptaene (III) and 9-phenyl-8,10,17-triazatetracyclo[8.7.0 02 7.011,16] heptadeca-1(17),2,4,6,11(16),12,14-heptaene (VIII) have been discussed. The computed NMR, IR, molecular electrostatic potential and frontier molecular orbitals of compounds I, III and VIII have been discussed. The M06 functional gave most of its values closest to the experimental values for the bond lengths and bond angles of compounds I and III. For compound VIII, none of the functionals gave values for bond lengths and bond angles that were consistent with the experimental values, but M06 gave values closest to experimental values. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging activity of the triazatetracyclics showed that compound I exhibits signifcant DPPH scavenging activity with an IC50 of 56.18 µM compared to 2.37 µM for ascorbic acid.
- Full Text:
- Date Issued: 2021
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Krause, Jason , Frost, Carminita L , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/451186 , vital:75026 , xlink:href="https://doi.org/10.1007/s13738-021-02158-3"
- Description: Some dihydrobenzo[4,5]imidazo[1,2-c]quinazolines have been synthesized from aldehydes and ketones, using the ketones as both reagents and solvents and tetrahydrofuran (THF) as the solvent for the aldehydes, to yield the triazatetracyclics. The compounds have been characterized with spectroscopy and microanalysis. The crystal structures of 9,9-dimethyl-8,10,17- triazatetracyclo[8.7.02,7.011,16]heptadeca-1(17),2,4,6,11(16),12,14-heptaene (I), 9-butyl-9-methyl-8,10,17-triazatetracyclo[8.7.0.02 , 7 .011,16]heptadeca-(17),2,4,6,11(16),12,14-heptaene (III) and 9-phenyl-8,10,17-triazatetracyclo[8.7.0 02 7.011,16] heptadeca-1(17),2,4,6,11(16),12,14-heptaene (VIII) have been discussed. The computed NMR, IR, molecular electrostatic potential and frontier molecular orbitals of compounds I, III and VIII have been discussed. The M06 functional gave most of its values closest to the experimental values for the bond lengths and bond angles of compounds I and III. For compound VIII, none of the functionals gave values for bond lengths and bond angles that were consistent with the experimental values, but M06 gave values closest to experimental values. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging activity of the triazatetracyclics showed that compound I exhibits signifcant DPPH scavenging activity with an IC50 of 56.18 µM compared to 2.37 µM for ascorbic acid.
- Full Text:
- Date Issued: 2021
The Formation of 2, 2, 4-Trimethyl-2, 3-dihydro-1 H-1, 5-Benzodiazepine from 1, 2-Diaminobenzene in the Presence of Acetone
- Odame, Felix, Kleyi, Phumelele, Hosten, Eric C, Betz, Richard, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Kleyi, Phumelele , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/448952 , vital:74773 , xlink:href="https://doi.org/10.3390/molecules181114293"
- Description: In an attempt to synthesize a 2-substituted benzimidazole from the reaction of o-phenylenediamine and isophthalic acid in the presence of acetone and ethanol under microwave irradiation, a salt of the isophthalate ion and 2,2,4-trimethyl-2,3-dihydro-1H-1,5-benzodiazepin-5-ium ion was obtained. The condensation of two moles of acetone with the amine groups resulted in the formation of the benzodiazepine which crystallized as an iminium cation forming a salt with the isophthalate anion. The formation of benzodiazepine was also confirmed by performing the reaction of o-phenylenediamine with excess acetone in ethanol under conventional heating conditions. The compounds were characterized by NMR, FTIR, HRMS and microanalysis as well as X-ray crystallography. The reaction mechanism leading to the formation of benzodiazepine is also discussed.
- Full Text:
- Date Issued: 2013
- Authors: Odame, Felix , Kleyi, Phumelele , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/448952 , vital:74773 , xlink:href="https://doi.org/10.3390/molecules181114293"
- Description: In an attempt to synthesize a 2-substituted benzimidazole from the reaction of o-phenylenediamine and isophthalic acid in the presence of acetone and ethanol under microwave irradiation, a salt of the isophthalate ion and 2,2,4-trimethyl-2,3-dihydro-1H-1,5-benzodiazepin-5-ium ion was obtained. The condensation of two moles of acetone with the amine groups resulted in the formation of the benzodiazepine which crystallized as an iminium cation forming a salt with the isophthalate anion. The formation of benzodiazepine was also confirmed by performing the reaction of o-phenylenediamine with excess acetone in ethanol under conventional heating conditions. The compounds were characterized by NMR, FTIR, HRMS and microanalysis as well as X-ray crystallography. The reaction mechanism leading to the formation of benzodiazepine is also discussed.
- Full Text:
- Date Issued: 2013
A New Synthetic Method for Tetraazatricyclic Derivatives and Evaluation of Their Biological Properties
- Odame, Felix, Betz, Richard, Hosten, Eric C, Krause, Jason, Isaacs, Michelle, Hoppe, Heinrich C, Khanye, Setshaba D, Sayed, Yasien, Frost, P Carminita, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Betz, Richard , Hosten, Eric C , Krause, Jason , Isaacs, Michelle , Hoppe, Heinrich C , Khanye, Setshaba D , Sayed, Yasien , Frost, P Carminita , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2018
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123189 , vital:35413 , https://doi.org/10.1002/slct.201802930
- Description: Herein, we propose novel quinolones incorporating an INH moiety as potential drug templates against TB. The quinolone-based compounds bearing an INH moiety attached via a hydrazide–hydrazone bond were synthesised and evaluated against Mycobacterium tuberculosis H37Rv (MTB). The compounds were also evaluated for cytotoxicity against HeLa cell lines. These compounds showed significant activity (MIC90) against MTB in the range of 0.2–8 μM without any cytotoxic effects. Compounds 10 (MIC90; 0.9 μM), 11 (MIC90; 0.2 μM), 12 (MIC90; 0.8 μM) and compound 15 (MIC90; 0.8 μM), the most active compounds in this series, demonstrate activities on par with INH and superior to those reported for the fluoroquinolones. The SAR analysis suggests that the nature of substituents at positions −1 and −3 of the quinolone nucleus influences anti-MTB activity. Aqueous solubility evaluation and in vitro metabolic stability of compound 12 highlights favourable drug-like properties for this compound class.
- Full Text:
- Date Issued: 2018
- Authors: Odame, Felix , Betz, Richard , Hosten, Eric C , Krause, Jason , Isaacs, Michelle , Hoppe, Heinrich C , Khanye, Setshaba D , Sayed, Yasien , Frost, P Carminita , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2018
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123189 , vital:35413 , https://doi.org/10.1002/slct.201802930
- Description: Herein, we propose novel quinolones incorporating an INH moiety as potential drug templates against TB. The quinolone-based compounds bearing an INH moiety attached via a hydrazide–hydrazone bond were synthesised and evaluated against Mycobacterium tuberculosis H37Rv (MTB). The compounds were also evaluated for cytotoxicity against HeLa cell lines. These compounds showed significant activity (MIC90) against MTB in the range of 0.2–8 μM without any cytotoxic effects. Compounds 10 (MIC90; 0.9 μM), 11 (MIC90; 0.2 μM), 12 (MIC90; 0.8 μM) and compound 15 (MIC90; 0.8 μM), the most active compounds in this series, demonstrate activities on par with INH and superior to those reported for the fluoroquinolones. The SAR analysis suggests that the nature of substituents at positions −1 and −3 of the quinolone nucleus influences anti-MTB activity. Aqueous solubility evaluation and in vitro metabolic stability of compound 12 highlights favourable drug-like properties for this compound class.
- Full Text:
- Date Issued: 2018
Benzimidazole or Diamide From a Reaction of Diamines and Carboxylic Acids or Acid Chlorides: Crystal Structures and Theoretical Studies
- Odame, Felix, Hosten, Eric C, Betz, Richard, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447938 , vital:74685 , xlink:href="https://pdfs.semanticscholar.org/bf5a/ce94c9436f40059793eb988e08da8ef09886.pdf"
- Description: A reaction of an acid chloride with a diamine yielded a diamide. m-Toluic acid was chlorinated to m-toluoyl chloride and subsequently reacted with 4-methyl-o-phenylenediamine in pyridine to obtain 3-methyl-N-[2-(3-methylbenzamido)phenylbenzamide (I). 2-(3-Methylphenyl)-1H-benzimidazole (II) has been obtained upon reacting o-phenylenediamine with m-toluic acid in polyphosphoric acid and toluene. The compounds have been characterized by IR, NMR, microanalyses and GC-MS. The crystal structures of the compounds have been discussed. DFT calculations of the frontier orbitals of the precursor compounds have been carried out to ascertain the groups that contribute to the HOMO and LUMO, and to study their contribution to the reactivity in the formation of the diamides and benzimidazoles. The synthesis of the amide from a diamine was seen to be favoured in the presence of a good leaving group attached to the carbonyl as in the case of acid chloride. However, the synthesis of benzimidazoles was found to be favoured in the presence of an excess of a protonating agent and high temperature.
- Full Text:
- Date Issued: 2015
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447938 , vital:74685 , xlink:href="https://pdfs.semanticscholar.org/bf5a/ce94c9436f40059793eb988e08da8ef09886.pdf"
- Description: A reaction of an acid chloride with a diamine yielded a diamide. m-Toluic acid was chlorinated to m-toluoyl chloride and subsequently reacted with 4-methyl-o-phenylenediamine in pyridine to obtain 3-methyl-N-[2-(3-methylbenzamido)phenylbenzamide (I). 2-(3-Methylphenyl)-1H-benzimidazole (II) has been obtained upon reacting o-phenylenediamine with m-toluic acid in polyphosphoric acid and toluene. The compounds have been characterized by IR, NMR, microanalyses and GC-MS. The crystal structures of the compounds have been discussed. DFT calculations of the frontier orbitals of the precursor compounds have been carried out to ascertain the groups that contribute to the HOMO and LUMO, and to study their contribution to the reactivity in the formation of the diamides and benzimidazoles. The synthesis of the amide from a diamine was seen to be favoured in the presence of a good leaving group attached to the carbonyl as in the case of acid chloride. However, the synthesis of benzimidazoles was found to be favoured in the presence of an excess of a protonating agent and high temperature.
- Full Text:
- Date Issued: 2015
Characterization of some amino acid derivatives of benzoyl isothiocyanate: Crystal structures and theoretical prediction of their reactivity
- Odame, Felix, Hosten, Eric C, Betz, Richard, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447952 , vital:74686 , xlink:href="https://doi.org/10.1016/j.molstruc.2015.05.053"
- Description: The reaction of benzoyl isothiocyanate with L-serine, L-proline, D-methionine and L-alanine gave 2-[(benzoylcarbamothioyl)amino]-3-hydroxypropanoic acid (I), 1-(benzoylcarbamothioyl)pyrrolidine-2-carboxylic acid (II), 2-[(benzoylcarbamothioyl)amino]-4-(methylsulfanyl)butanoic acid (III) and 2-[(benzoylcarbamothioyl)amino]propanoic acid (IV), respectively. The compounds have been characterized by IR, NMR, microanalyses and mass spectrometry. The crystal structures of all the compounds have also been discussed. Compound II showed rotamers in solution. DFT calculations of the frontier orbitals of the compounds have been carried out to ascertain the groups that contribute to the HOMO and LUMO, and to study their contribution to the reactivity of these compounds. The calculations indicated that the carboxylic acid group in these compounds is unreactive hence making the conversion to benzimidazoles via cyclization on the carboxylic acids impractical. This has been further confirmed by the reaction of compounds I–IV, respectively, with o-phenylene diamine which was unsuccessful but gave compound V.
- Full Text:
- Date Issued: 2015
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447952 , vital:74686 , xlink:href="https://doi.org/10.1016/j.molstruc.2015.05.053"
- Description: The reaction of benzoyl isothiocyanate with L-serine, L-proline, D-methionine and L-alanine gave 2-[(benzoylcarbamothioyl)amino]-3-hydroxypropanoic acid (I), 1-(benzoylcarbamothioyl)pyrrolidine-2-carboxylic acid (II), 2-[(benzoylcarbamothioyl)amino]-4-(methylsulfanyl)butanoic acid (III) and 2-[(benzoylcarbamothioyl)amino]propanoic acid (IV), respectively. The compounds have been characterized by IR, NMR, microanalyses and mass spectrometry. The crystal structures of all the compounds have also been discussed. Compound II showed rotamers in solution. DFT calculations of the frontier orbitals of the compounds have been carried out to ascertain the groups that contribute to the HOMO and LUMO, and to study their contribution to the reactivity of these compounds. The calculations indicated that the carboxylic acid group in these compounds is unreactive hence making the conversion to benzimidazoles via cyclization on the carboxylic acids impractical. This has been further confirmed by the reaction of compounds I–IV, respectively, with o-phenylene diamine which was unsuccessful but gave compound V.
- Full Text:
- Date Issued: 2015
Characterization and computational studies of a co-crystal of 2-aminobenzimidazole and 2-[(benzoylcarbamothioyl) amino] propanoic acid
- Odame, Felix, Hosten, Eric C, Betz, Richard, Lobb, Kevin A, Tshentu, Zenixole R
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447030 , vital:74578 , xlink:href="https://doi.org/10.1134/S0022476618050268"
- Description: A novel co-crystal of 2-aminobenzimidazole and 2-[(benzoylcarbamothioyl)amino] propanoic acid is synthesized and characterized by spectroscopy, elemental analysis, GC-MS, and single crystal XRD. A computation of the structures involved in the formation of the co-crystal are carried out and their contribution to reactivity is explained.
- Full Text:
- Date Issued: 2018
- Authors: Odame, Felix , Hosten, Eric C , Betz, Richard , Lobb, Kevin A , Tshentu, Zenixole R
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/447030 , vital:74578 , xlink:href="https://doi.org/10.1134/S0022476618050268"
- Description: A novel co-crystal of 2-aminobenzimidazole and 2-[(benzoylcarbamothioyl)amino] propanoic acid is synthesized and characterized by spectroscopy, elemental analysis, GC-MS, and single crystal XRD. A computation of the structures involved in the formation of the co-crystal are carried out and their contribution to reactivity is explained.
- Full Text:
- Date Issued: 2018