6-Hydroxymelatonin protects against cyanide induced oxidative stress in rat brain homogenates
- Maharaj, Deepa S, Walker, Roderick B, Glass, Beverley D, Daya, Santylal
- Authors: Maharaj, Deepa S , Walker, Roderick B , Glass, Beverley D , Daya, Santylal
- Date: 2003
- Language: English
- Type: Article , text
- Identifier: vital:6405 , http://hdl.handle.net/10962/d1006478
- Description: Both 6-hydroxymelatonin and N-acetyl-N-formyl-5-methoxykynurenamine are photodegradants and enzymatic metabolites of melatonin and are known to retain equipotent activity against potassium cyanide-induced superoxide generation compared to melatonin. It is not clear whether one or both of these metabolites is responsible for this effect. The present study therefore investigates the possible manner in which 6-hydroxymelatonin protects against oxidative stress induced by cyanide in rat brain homogenates. We examined the ability of 6-hydroxymelatonin to scavenge KCN-induced superoxide anion generation as well as lipid peroxidation. In addition, we also examined the effect of this indole on lactate dehydrogenase activity (LDH) as well as mitochondrial electron transport using dichlorophenol–indophenol as an electron acceptor. The results of this study show that 6-hydroxymelatonin significantly reduces KCN-induced superoxide anion generation, which is accompanied by a commensurate reduction in lipid peroxidation. Partial reversal of the KCN-induced reduction in mitochondrial electron transport is accompanied by a similar reversal of mitochondrial LDH activity blunted by KCN. It can thus be proposed that 6-hydroxymelatonin is potentially neuroprotective against KCN-induced neurotoxicity.
- Full Text:
- Date Issued: 2003
- Authors: Maharaj, Deepa S , Walker, Roderick B , Glass, Beverley D , Daya, Santylal
- Date: 2003
- Language: English
- Type: Article , text
- Identifier: vital:6405 , http://hdl.handle.net/10962/d1006478
- Description: Both 6-hydroxymelatonin and N-acetyl-N-formyl-5-methoxykynurenamine are photodegradants and enzymatic metabolites of melatonin and are known to retain equipotent activity against potassium cyanide-induced superoxide generation compared to melatonin. It is not clear whether one or both of these metabolites is responsible for this effect. The present study therefore investigates the possible manner in which 6-hydroxymelatonin protects against oxidative stress induced by cyanide in rat brain homogenates. We examined the ability of 6-hydroxymelatonin to scavenge KCN-induced superoxide anion generation as well as lipid peroxidation. In addition, we also examined the effect of this indole on lactate dehydrogenase activity (LDH) as well as mitochondrial electron transport using dichlorophenol–indophenol as an electron acceptor. The results of this study show that 6-hydroxymelatonin significantly reduces KCN-induced superoxide anion generation, which is accompanied by a commensurate reduction in lipid peroxidation. Partial reversal of the KCN-induced reduction in mitochondrial electron transport is accompanied by a similar reversal of mitochondrial LDH activity blunted by KCN. It can thus be proposed that 6-hydroxymelatonin is potentially neuroprotective against KCN-induced neurotoxicity.
- Full Text:
- Date Issued: 2003
A comparative study of the effect of different stabilizers on the critical quality attributes of self-assembling nano co-crystals
- Witika, Bwalya A, Smith, Vincent J, Walker, Roderick B
- Authors: Witika, Bwalya A , Smith, Vincent J , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183224 , vital:43931 , xlink:href=" https://doi.org/10.3390/pharmaceutics12020182"
- Description: Lamivudine (3TC) and zidovudine (AZT) are antiviral agents used orally to manage HIV/AIDS infection. A pseudo one-solvent bottom-up approach was used to develop and produce nano co-crystals of 3TC and AZT. Equimolar amounts of 3TC dissolved in de-ionized water and AZT in methanol were rapidly injected into a pre-cooled vessel and sonicated at 4 °C. The resultant suspensions were characterized using a Zetasizer. The particle size, polydispersity index and Zeta potential were elucidated. Further characterization was undertaken using powder X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and energy dispersive X-ray spectroscopy scanning electron microscopy. Different surfactants were assessed for their ability to stabilize the nano co-crystals and for their ability to produce nano co-crystals with specific and desirable critical quality attributes (CQA) including particle size (PS) less than 1000 nm, polydispersity index (PDI) less than 0.500 and Zeta potential (ZP) less than −30 mV. All surfactants produced co-crystals in the nanometer range. The PDI and PS are concentration-dependent for all nano co-crystals manufactured while only ZP was within specification when sodium dodecyl sulfate was used in the process.
- Full Text:
- Date Issued: 2020
- Authors: Witika, Bwalya A , Smith, Vincent J , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183224 , vital:43931 , xlink:href=" https://doi.org/10.3390/pharmaceutics12020182"
- Description: Lamivudine (3TC) and zidovudine (AZT) are antiviral agents used orally to manage HIV/AIDS infection. A pseudo one-solvent bottom-up approach was used to develop and produce nano co-crystals of 3TC and AZT. Equimolar amounts of 3TC dissolved in de-ionized water and AZT in methanol were rapidly injected into a pre-cooled vessel and sonicated at 4 °C. The resultant suspensions were characterized using a Zetasizer. The particle size, polydispersity index and Zeta potential were elucidated. Further characterization was undertaken using powder X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and energy dispersive X-ray spectroscopy scanning electron microscopy. Different surfactants were assessed for their ability to stabilize the nano co-crystals and for their ability to produce nano co-crystals with specific and desirable critical quality attributes (CQA) including particle size (PS) less than 1000 nm, polydispersity index (PDI) less than 0.500 and Zeta potential (ZP) less than −30 mV. All surfactants produced co-crystals in the nanometer range. The PDI and PS are concentration-dependent for all nano co-crystals manufactured while only ZP was within specification when sodium dodecyl sulfate was used in the process.
- Full Text:
- Date Issued: 2020
A sensitive and reliable method for the detection of lipid peroxidation in biological tissues
- Anoopkumar-Dukie, Shailendra, Walker, Roderick B, Daya, Santylal
- Authors: Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184325 , vital:44208 , xlink:href="https://doi.org/10.1211/0022357011775299"
- Description: A simple, accurate and cost effective method has been designed for the determination of lipid peroxidation in biological tissue samples. The method was a modification and improvement on existing methods available for lipid peroxidation determination. Solid-phase extraction was used to separate the thiobarbituric acid–malondialdehyde complex from thiobarbituric acidreactive substances and HPLC was performed using a C18 (Waters Spherisorb, 5 µm, 250¬4.6 mm i.d.) column to achieve isolation of the complex. The procedure was validated with respect to linearity of calibration (0.998), precision, sensitivity and limits of quantitation (1 nmol mL−1) and detection (0.5 nmol mL−1). Resorcinol was used as an external standard. The method was tested by inducing free radical generation with a known free radical generator, quinolinic acid, in rat brain homogenate. The results showed that the method presented allowed detection of lipid peroxidation products at concentrations in the nanomolar (nM) range compared with the micromolar (µM) range detected by other methods, thus rendering it suitable for use with biological samples. In addition, the modified method allowed for detection of the purified lipid peroxidation products, thus eliminating the possibility of simultaneous detection of impurities that absorb at the same wavelength.
- Full Text:
- Date Issued: 2001
- Authors: Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184325 , vital:44208 , xlink:href="https://doi.org/10.1211/0022357011775299"
- Description: A simple, accurate and cost effective method has been designed for the determination of lipid peroxidation in biological tissue samples. The method was a modification and improvement on existing methods available for lipid peroxidation determination. Solid-phase extraction was used to separate the thiobarbituric acid–malondialdehyde complex from thiobarbituric acidreactive substances and HPLC was performed using a C18 (Waters Spherisorb, 5 µm, 250¬4.6 mm i.d.) column to achieve isolation of the complex. The procedure was validated with respect to linearity of calibration (0.998), precision, sensitivity and limits of quantitation (1 nmol mL−1) and detection (0.5 nmol mL−1). Resorcinol was used as an external standard. The method was tested by inducing free radical generation with a known free radical generator, quinolinic acid, in rat brain homogenate. The results showed that the method presented allowed detection of lipid peroxidation products at concentrations in the nanomolar (nM) range compared with the micromolar (µM) range detected by other methods, thus rendering it suitable for use with biological samples. In addition, the modified method allowed for detection of the purified lipid peroxidation products, thus eliminating the possibility of simultaneous detection of impurities that absorb at the same wavelength.
- Full Text:
- Date Issued: 2001
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Mohammadi, Ali, Haririan, I, Rezanour, Nasrin, Ghiasi, L, Walker, Roderick B
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, Nasrin , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184267 , vital:44195 , xlink:href="https://doi.org/10.1016/j.chroma.2006.03.038"
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 μm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, Nasrin , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184267 , vital:44195 , xlink:href="https://doi.org/10.1016/j.chroma.2006.03.038"
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 μm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Mohammadi, Ali, Haririan, I, Rezanour, I, Ghiasi, L, Walker, Roderick B
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
Academy of Pharmaceutical Sciences
- Authors: Walker, Roderick B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184768 , vital:44270 , xlink:href="https://hdl.handle.net/10520/EJC-98c37d47c"
- Description: It is an honour and a pleasure to report on the activities of the Academy of Pharmaceutical Sciences since the PSSA AGM in 2016. The Academy of Pharmaceutical Sciences of the Pharmaceutical Society of South Africa (APSSA) held their 37th Annual Conference and 38th Annual General Meeting at the All African Congress on Pharmacology and Pharmacy. The conference was jointly organised by the Academy of Pharmaceutical Sciences of South Africa (APSSA), the South African Society for Basic and Clinical Pharmacology (SASBCP) on behalf of Pharmacology for Africa (Pharfa) and the Toxicology Society of South Africa (ToxSA). The annual APSSA conference was hosted by the Department of Pharmaceutical Sciences, Tshwane University of Technology under the leadership of Dr Ilze Vermaak and was held from 5-8 October 2016 at Misty Hills Conference Centre, situated close to the Cradle of Humankind.
- Full Text:
- Date Issued: 2017
- Authors: Walker, Roderick B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184768 , vital:44270 , xlink:href="https://hdl.handle.net/10520/EJC-98c37d47c"
- Description: It is an honour and a pleasure to report on the activities of the Academy of Pharmaceutical Sciences since the PSSA AGM in 2016. The Academy of Pharmaceutical Sciences of the Pharmaceutical Society of South Africa (APSSA) held their 37th Annual Conference and 38th Annual General Meeting at the All African Congress on Pharmacology and Pharmacy. The conference was jointly organised by the Academy of Pharmaceutical Sciences of South Africa (APSSA), the South African Society for Basic and Clinical Pharmacology (SASBCP) on behalf of Pharmacology for Africa (Pharfa) and the Toxicology Society of South Africa (ToxSA). The annual APSSA conference was hosted by the Department of Pharmaceutical Sciences, Tshwane University of Technology under the leadership of Dr Ilze Vermaak and was held from 5-8 October 2016 at Misty Hills Conference Centre, situated close to the Cradle of Humankind.
- Full Text:
- Date Issued: 2017
Amoxicillin removal from aqueous media using multi-walled carbon nanotubes
- Mohammadi, Ali, Kazemipour, Maryam, Walker, Roderick B, Ansari, Mehdi
- Authors: Mohammadi, Ali , Kazemipour, Maryam , Walker, Roderick B , Ansari, Mehdi
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183861 , vital:44076 , xlink:href="https://doi.org/10.1080/1536383X.2013.866944"
- Description: Multi-walled carbon nanotubes (MWCNT) were used to separate amoxicillin from aqueous media. The parameters affecting amoxicillin adsorption such as pH, temperature, time, interferences of similar molecules, and the amount of adsorbent used were studied. Amoxicillin adsorption using MWCNT was compared to that using Fullerene C60 and activated carbon (AC). The adsorption efficiency of 0.1 and 0.2 g of MWCNT using in a continuous mode were 86.5% and 87.9%, respectively. Evaluation of the adsorbent capacity showed that each gram of MWCNT can absorb 22.9 mg amoxicillin. The effect of pH was studied over the range 2–8 and revealed that adsorption of the amoxicillin at the initial pH of 4.6 was more effective than any other pH. The adsorption of amoxicillin on MWCNT was much greater than Fullerene C60 and AC. Adsorption data showed that they were best fitted to the Langmuir isotherm.
- Full Text:
- Date Issued: 2015
- Authors: Mohammadi, Ali , Kazemipour, Maryam , Walker, Roderick B , Ansari, Mehdi
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183861 , vital:44076 , xlink:href="https://doi.org/10.1080/1536383X.2013.866944"
- Description: Multi-walled carbon nanotubes (MWCNT) were used to separate amoxicillin from aqueous media. The parameters affecting amoxicillin adsorption such as pH, temperature, time, interferences of similar molecules, and the amount of adsorbent used were studied. Amoxicillin adsorption using MWCNT was compared to that using Fullerene C60 and activated carbon (AC). The adsorption efficiency of 0.1 and 0.2 g of MWCNT using in a continuous mode were 86.5% and 87.9%, respectively. Evaluation of the adsorbent capacity showed that each gram of MWCNT can absorb 22.9 mg amoxicillin. The effect of pH was studied over the range 2–8 and revealed that adsorption of the amoxicillin at the initial pH of 4.6 was more effective than any other pH. The adsorption of amoxicillin on MWCNT was much greater than Fullerene C60 and AC. Adsorption data showed that they were best fitted to the Langmuir isotherm.
- Full Text:
- Date Issued: 2015
An artificial neural network approach to predict the effects of formulation and process variables on prednisone release from a multipartite system
- Manda, Arthur, Walker, Roderick B, Khamanga, Sandile M
- Authors: Manda, Arthur , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183237 , vital:43933 , xlink:href="https://doi.org/10.3390/pharmaceutics11030109"
- Description: The impact of formulation and process variables on the in-vitro release of prednisone from a multiple-unit pellet system was investigated. Box-Behnken Response Surface Methodology (RSM) was used to generate multivariate experiments. The extrusion-spheronization method was used to produce pellets and dissolution studies were performed using United States Pharmacopoeia (USP) Apparatus 2 as described in USP XXIV. Analysis of dissolution test samples was performed using a reversed-phase high-performance liquid chromatography (RP-HPLC) method. Four formulation and process variables viz., microcrystalline cellulose concentration, sodium starch glycolate concentration, spheronization time and extrusion speed were investigated and drug release, aspect ratio and yield were monitored for the trained artificial neural networks (ANN). To achieve accurate prediction, data generated from experimentation were used to train a multi-layer perceptron (MLP) using back propagation (BP) and the Broyden-Fletcher-Goldfarb-Shanno (BFGS) 57 training algorithm until a satisfactory value of root mean square error (RMSE) was observed. The study revealed that the in-vitro release profile of prednisone was significantly impacted by microcrystalline cellulose concentration and sodium starch glycolate concentration. Increasing microcrystalline cellulose concentration retarded dissolution rate whereas increasing sodium starch glycolate concentration improved dissolution rate. Spheronization time and extrusion speed had minimal impact on prednisone release but had a significant impact on extrudate and pellet quality. This work demonstrated that RSM can be successfully used concurrently with ANN for dosage form manufacture to permit the exploration of experimental regions that are omitted when using RSM alone.
- Full Text:
- Date Issued: 2019
- Authors: Manda, Arthur , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183237 , vital:43933 , xlink:href="https://doi.org/10.3390/pharmaceutics11030109"
- Description: The impact of formulation and process variables on the in-vitro release of prednisone from a multiple-unit pellet system was investigated. Box-Behnken Response Surface Methodology (RSM) was used to generate multivariate experiments. The extrusion-spheronization method was used to produce pellets and dissolution studies were performed using United States Pharmacopoeia (USP) Apparatus 2 as described in USP XXIV. Analysis of dissolution test samples was performed using a reversed-phase high-performance liquid chromatography (RP-HPLC) method. Four formulation and process variables viz., microcrystalline cellulose concentration, sodium starch glycolate concentration, spheronization time and extrusion speed were investigated and drug release, aspect ratio and yield were monitored for the trained artificial neural networks (ANN). To achieve accurate prediction, data generated from experimentation were used to train a multi-layer perceptron (MLP) using back propagation (BP) and the Broyden-Fletcher-Goldfarb-Shanno (BFGS) 57 training algorithm until a satisfactory value of root mean square error (RMSE) was observed. The study revealed that the in-vitro release profile of prednisone was significantly impacted by microcrystalline cellulose concentration and sodium starch glycolate concentration. Increasing microcrystalline cellulose concentration retarded dissolution rate whereas increasing sodium starch glycolate concentration improved dissolution rate. Spheronization time and extrusion speed had minimal impact on prednisone release but had a significant impact on extrudate and pellet quality. This work demonstrated that RSM can be successfully used concurrently with ANN for dosage form manufacture to permit the exploration of experimental regions that are omitted when using RSM alone.
- Full Text:
- Date Issued: 2019
An assessment of the efficacy of two lysine microencapsulation techniques to determine the quantitative lysine requirement of the South African abalone, Haliotis midae L
- Shipton, Thomas A, Britz, Peter J, Walker, Roderick B
- Authors: Shipton, Thomas A , Britz, Peter J , Walker, Roderick B
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184289 , vital:44197 , xlink:href="https://doi.org/10.1046/j.1365-2095.2002.00204.x"
- Description: The quantification of the essential amino acid requirements of a species is a prerequisite to the formulation of biologically optimized diets. In this study, crystalline L-lysine was used in an attempt to determine the quantitative lysine requirement of juvenile Haliotis midae. Two microencapsulation techniques [gelatine/acacia and cellulose acetate phthalate (CAP)] were used to retard leaching of crystalline L-lysine incorporated into semipurified test diets. An assessment of the efficacy of the encapsulation techniques, revealed that despite effective lysine supplementation, H. midae fed semipurified test diets containing encapsulated crystalline L-lysine failed to promote significant improvements in either growth, feed or protein efficiency (P > 0.05). The failure of the crystalline L-lysine to illicit growth and nutritional responses is discussed.
- Full Text:
- Date Issued: 2002
- Authors: Shipton, Thomas A , Britz, Peter J , Walker, Roderick B
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184289 , vital:44197 , xlink:href="https://doi.org/10.1046/j.1365-2095.2002.00204.x"
- Description: The quantification of the essential amino acid requirements of a species is a prerequisite to the formulation of biologically optimized diets. In this study, crystalline L-lysine was used in an attempt to determine the quantitative lysine requirement of juvenile Haliotis midae. Two microencapsulation techniques [gelatine/acacia and cellulose acetate phthalate (CAP)] were used to retard leaching of crystalline L-lysine incorporated into semipurified test diets. An assessment of the efficacy of the encapsulation techniques, revealed that despite effective lysine supplementation, H. midae fed semipurified test diets containing encapsulated crystalline L-lysine failed to promote significant improvements in either growth, feed or protein efficiency (P > 0.05). The failure of the crystalline L-lysine to illicit growth and nutritional responses is discussed.
- Full Text:
- Date Issued: 2002
An investigation into the neuroprotective properties of ibuprofen
- Lambat, Zaynab Y, Conrad, Natasha, Anoopkumar-Dukie, Shailendra, Walker, Roderick B, Daya, Santylal
- Authors: Lambat, Zaynab Y , Conrad, Natasha , Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184335 , vital:44209 , xlink:href="https://doi.org/10.1023/A:1011115006856"
- Description: There is increasing evidence suggesting a protective role for anti-inflammatory medications in neurological disorders such as Alzheimer's disease (AD). While there has not been any direct evidence for this, a number of clinical studies indicate that those patients who have had a history of nonsteroidal anti-inflammatory use, have a lower incidence of AD. Since there is currently no evidence on the mechanism by which these agents offer possible neuroprotection, we investigated the potential neuroprotective properties of the nonsteroidal anti-inflammatory drug, ibuprofen, by examining whether this agent could reduce lipid peroxidation and superoxide radical generation. Quinolinic acid and cyanide, known neurotoxins, were used to induce lipid peroxidation and superoxide anion formation respectively, in rat brain homogenate. The results show that ibuprofen significantly (p more than 0.05) reduced quinolinic acid-induced lipid peroxidation and cyanide-induced superoxide production. The results of the present report therefore suggest a possible mechanism for the neuroprotective effect of ibuprofen.
- Full Text: false
- Date Issued: 2000
- Authors: Lambat, Zaynab Y , Conrad, Natasha , Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184335 , vital:44209 , xlink:href="https://doi.org/10.1023/A:1011115006856"
- Description: There is increasing evidence suggesting a protective role for anti-inflammatory medications in neurological disorders such as Alzheimer's disease (AD). While there has not been any direct evidence for this, a number of clinical studies indicate that those patients who have had a history of nonsteroidal anti-inflammatory use, have a lower incidence of AD. Since there is currently no evidence on the mechanism by which these agents offer possible neuroprotection, we investigated the potential neuroprotective properties of the nonsteroidal anti-inflammatory drug, ibuprofen, by examining whether this agent could reduce lipid peroxidation and superoxide radical generation. Quinolinic acid and cyanide, known neurotoxins, were used to induce lipid peroxidation and superoxide anion formation respectively, in rat brain homogenate. The results show that ibuprofen significantly (p more than 0.05) reduced quinolinic acid-induced lipid peroxidation and cyanide-induced superoxide production. The results of the present report therefore suggest a possible mechanism for the neuroprotective effect of ibuprofen.
- Full Text: false
- Date Issued: 2000
Analysis of chromameter results obtained from corticosteroid-induced skin blanching. I. Manipulation of data
- Smith, Eric W, Haigh, John M, Walker, Roderick B
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998
Analysis of macrolide antibiotics
- Kanfer, Isadore, Skinner, Michael F, Walker, Roderick B
- Authors: Kanfer, Isadore , Skinner, Michael F , Walker, Roderick B
- Date: 1998
- Language: English
- Type: Article , text
- Identifier: vital:7011 , http://hdl.handle.net/10962/d1008394 , http://www.sciencedirect.com/science/article/pii/S0021967398002763
- Description: The following macrolide antibiotics have been covered in this review: erythromycin and its related substances, azithromycin, clarithromycin, dirithromycin, roxithromycin, flurithromycin, josamycin, rokitamycin, kitasamycin, mycinamycin, mirosamycin, oleandomycin, rosaramicin, spiramycin and tylosin. The application of various thin-layer chromatography, paper chromatography, gas chromatography, high-performance liquid chromatography and capillary zone electrophoresis procedures for their analysis are described. These techniques have been applied to the separation and quantitative analysis of the macrolides in fermentation media, purity assessment of raw materials, assay of pharmaceutical dosage forms and the measurement of clinically useful macrolide antibiotics in biological samples such as blood, plasma, serum, urine and tissues. Data relating to the chromatographic behaviour of some macrolide antibiotics as well as the various detection methods used, such as bioautography, UV spectrophotometry, fluorometry, electrochemical detection, chemiluminescence and mass spectrometry techniques are also included.
- Full Text:
- Date Issued: 1998
- Authors: Kanfer, Isadore , Skinner, Michael F , Walker, Roderick B
- Date: 1998
- Language: English
- Type: Article , text
- Identifier: vital:7011 , http://hdl.handle.net/10962/d1008394 , http://www.sciencedirect.com/science/article/pii/S0021967398002763
- Description: The following macrolide antibiotics have been covered in this review: erythromycin and its related substances, azithromycin, clarithromycin, dirithromycin, roxithromycin, flurithromycin, josamycin, rokitamycin, kitasamycin, mycinamycin, mirosamycin, oleandomycin, rosaramicin, spiramycin and tylosin. The application of various thin-layer chromatography, paper chromatography, gas chromatography, high-performance liquid chromatography and capillary zone electrophoresis procedures for their analysis are described. These techniques have been applied to the separation and quantitative analysis of the macrolides in fermentation media, purity assessment of raw materials, assay of pharmaceutical dosage forms and the measurement of clinically useful macrolide antibiotics in biological samples such as blood, plasma, serum, urine and tissues. Data relating to the chromatographic behaviour of some macrolide antibiotics as well as the various detection methods used, such as bioautography, UV spectrophotometry, fluorometry, electrochemical detection, chemiluminescence and mass spectrometry techniques are also included.
- Full Text:
- Date Issued: 1998
Application of quality by design principles for optimizing process variables of Extrusion and Spheronization of a Captopril Pellet Formulation:
- Veerubhotla, Krishna, Walker, Roderick B
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/178312 , vital:40098 , DOI: 10.36468/pharmaceutical-sciences.624
- Description: Product development using quality by design is a proactive and risk-based approach that shifts the manufacturing process from empirical to science-based. Risk assessment was performed to identify and analyse risk areas for the manufacture of captopril pellets. Twelve experimental runs were performed using a Plackett-Burman screening design. Pareto plots revealed the effect of formulation and process variables on the responses monitored and facilitated the identification of the most critical parameters for optimization of the formulation. A response surface methodology approach in conjunction with a central composite design was used to optimize the Eudragit® RL 30D (15-30 ml), microcrystalline cellulose (20-40 % w/w), sodium starch glycolate (2-5 % w/w) and spheronizer speed (650-1050 rpm).
- Full Text:
- Date Issued: 2020
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/178312 , vital:40098 , DOI: 10.36468/pharmaceutical-sciences.624
- Description: Product development using quality by design is a proactive and risk-based approach that shifts the manufacturing process from empirical to science-based. Risk assessment was performed to identify and analyse risk areas for the manufacture of captopril pellets. Twelve experimental runs were performed using a Plackett-Burman screening design. Pareto plots revealed the effect of formulation and process variables on the responses monitored and facilitated the identification of the most critical parameters for optimization of the formulation. A response surface methodology approach in conjunction with a central composite design was used to optimize the Eudragit® RL 30D (15-30 ml), microcrystalline cellulose (20-40 % w/w), sodium starch glycolate (2-5 % w/w) and spheronizer speed (650-1050 rpm).
- Full Text:
- Date Issued: 2020
Application of the Minolta chromameter to the assessment of corticosteroid-induced skin blanching
- Walker, Roderick B, Haigh, John M, Smith, Eric W
- Authors: Walker, Roderick B , Haigh, John M , Smith, Eric W
- Date: 2000
- Language: English
- Type: Book chapter , text
- Identifier: vital:6451 , http://hdl.handle.net/10962/d1006639
- Full Text:
- Date Issued: 2000
- Authors: Walker, Roderick B , Haigh, John M , Smith, Eric W
- Date: 2000
- Language: English
- Type: Book chapter , text
- Identifier: vital:6451 , http://hdl.handle.net/10962/d1006639
- Full Text:
- Date Issued: 2000
Assessment of taste masking of captopril by ion-exchange resins using electronic gustatory system
- Chikukwa, Mellisa T, Wesoly, Malgorzata, Korzeniowska, Aleksandra B, Ciosek-Skibinska, Patrycja, Walker, Roderick B, Khamanga, Sandile M M
- Authors: Chikukwa, Mellisa T , Wesoly, Malgorzata , Korzeniowska, Aleksandra B , Ciosek-Skibinska, Patrycja , Walker, Roderick B , Khamanga, Sandile M M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184710 , vital:44265 , xlink:href="https://doi.org/10.1080/10837450.2019.1687520"
- Description: The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were evaluated. A central composite design was used to generate the experiments for the manufacture of resinates using different process and formulation variables. In vitro dissolution studies were performed for 2 h in 0.01N HCl (pH 1.6) using USP Apparatus I. The compatibility of CPT and the resin was evaluated by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD). The resinates were evaluated for micromeritic properties and further characterised using FTIR, DSC, and PXRD. Response surface methodology was used to determine the significance of input variables on the CPT content and release. The CPT resin ratio was found to have a significant impact on content of the resinates and on CPT release. The formulations were also studied for taste masking ability by means of an electronic gustatory system – electronic tongue.
- Full Text:
- Date Issued: 2020
- Authors: Chikukwa, Mellisa T , Wesoly, Malgorzata , Korzeniowska, Aleksandra B , Ciosek-Skibinska, Patrycja , Walker, Roderick B , Khamanga, Sandile M M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184710 , vital:44265 , xlink:href="https://doi.org/10.1080/10837450.2019.1687520"
- Description: The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were evaluated. A central composite design was used to generate the experiments for the manufacture of resinates using different process and formulation variables. In vitro dissolution studies were performed for 2 h in 0.01N HCl (pH 1.6) using USP Apparatus I. The compatibility of CPT and the resin was evaluated by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD). The resinates were evaluated for micromeritic properties and further characterised using FTIR, DSC, and PXRD. Response surface methodology was used to determine the significance of input variables on the CPT content and release. The CPT resin ratio was found to have a significant impact on content of the resinates and on CPT release. The formulations were also studied for taste masking ability by means of an electronic gustatory system – electronic tongue.
- Full Text:
- Date Issued: 2020
Biocompatibility of biomaterials for nanoencapsulation: Current approaches
- Witika, Bwalya A, Makoni, Pedzisai A, Matafwali, Scott K, Chabalenge, Billy, Mwila, Chiluba, Kalungia, Aubrey C, Nkanga, Christian I, Bapolisi, Alain M, Walker, Roderick B
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Matafwali, Scott K , Chabalenge, Billy , Mwila, Chiluba , Kalungia, Aubrey C , Nkanga, Christian I , Bapolisi, Alain M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183289 , vital:43939 , xlink:href="https://doi.org/10.3390/nano10091649"
- Description: Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.
- Full Text:
- Date Issued: 2020
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Matafwali, Scott K , Chabalenge, Billy , Mwila, Chiluba , Kalungia, Aubrey C , Nkanga, Christian I , Bapolisi, Alain M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183289 , vital:43939 , xlink:href="https://doi.org/10.3390/nano10091649"
- Description: Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.
- Full Text:
- Date Issued: 2020
Bioequivalence assessment of generic products an innovative South African approach
- Walker, Roderick B, Kanfer, Isadore, Skinner, Michael F
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006
Co-encapsulation of rifampicin and isoniazid in crude soybean lecithin liposomes
- Nkanga, Christian I, Noundou, Xavier S, Walker, Roderick B, Krause, Rui W M
- Authors: Nkanga, Christian I , Noundou, Xavier S , Walker, Roderick B , Krause, Rui W M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183536 , vital:44005 , xlink:href="https://doi.org/10.17159/0379-4350/2019/v72a11"
- Description: Despite the well-known anti-mycobacterial actions of isoniazid (INH) and rifampicin (RIF), the clinical success of tuberculosis (TB) therapy requires prolonged administration of multiple drugs in high doses, which often result in frequent adverse effects and low patient adherence. Although liposomes are promising candidates for controlled delivery of anti-TB drug, the high cost of synthetic and highly purified natural lipids currently used in liposomal technology might preclude the universal application of therapeutic liposomes. This work aimed at evaluating the potential of a cost-effective lipid material, crude soybean lecithin (CL), to co-encapsulate RIF and INH for liposomal dual delivery. RIF was encapsulated in CL-liposomes with/without cholesterol using film hydration method, after which INH was incorporated using a freeze–thawing technique. Dynamic light scattering, differential scanning calorimetry, X-ray diffraction and dialysis were used for liposome characterization. Liposomes containing CL alone (CLL) exhibited 90%encapsulation efficiency for RIF and 59%for INH. The mean size and surface charge of CLL were 1114nm and –63mV, respectively. In addition, CLL showed a controlled release profile for the co-encapsulated drugs. CLL would be promising vehicles for macrophage-targeting drug delivery. The present findings demonstrate the feasibility of using CL for preparation of combination products for liposomal delivery.
- Full Text:
- Date Issued: 2019
- Authors: Nkanga, Christian I , Noundou, Xavier S , Walker, Roderick B , Krause, Rui W M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183536 , vital:44005 , xlink:href="https://doi.org/10.17159/0379-4350/2019/v72a11"
- Description: Despite the well-known anti-mycobacterial actions of isoniazid (INH) and rifampicin (RIF), the clinical success of tuberculosis (TB) therapy requires prolonged administration of multiple drugs in high doses, which often result in frequent adverse effects and low patient adherence. Although liposomes are promising candidates for controlled delivery of anti-TB drug, the high cost of synthetic and highly purified natural lipids currently used in liposomal technology might preclude the universal application of therapeutic liposomes. This work aimed at evaluating the potential of a cost-effective lipid material, crude soybean lecithin (CL), to co-encapsulate RIF and INH for liposomal dual delivery. RIF was encapsulated in CL-liposomes with/without cholesterol using film hydration method, after which INH was incorporated using a freeze–thawing technique. Dynamic light scattering, differential scanning calorimetry, X-ray diffraction and dialysis were used for liposome characterization. Liposomes containing CL alone (CLL) exhibited 90%encapsulation efficiency for RIF and 59%for INH. The mean size and surface charge of CLL were 1114nm and –63mV, respectively. In addition, CLL showed a controlled release profile for the co-encapsulated drugs. CLL would be promising vehicles for macrophage-targeting drug delivery. The present findings demonstrate the feasibility of using CL for preparation of combination products for liposomal delivery.
- Full Text:
- Date Issued: 2019
Co-loading of isoniazid-grafted phthalocyanine-in-cyclodextrin and rifampicin in crude soybean lecithin liposomes: Formulation, spectroscopic and biological characterization
- Nkanga, Christian I, Roth, Michael, Walker, Roderick B, Noundou, Xavier S, Krause, Rui W M
- Authors: Nkanga, Christian I , Roth, Michael , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183481 , vital:43999 , xlink:href="https://doi.org/10.1166/jbn.2020.2880"
- Description: An inclusion complex of isoniazid-grafted phthalocyanine with gamma-cyclodextrin (Complex) was co-encapsulated with rifampicin (RIF) in crude soybean lecithin liposomes using a heating method. The encapsulation efficiency (%EE) of the Complex-RIF co-loaded liposomes (Rif-Complex-Lips) was determined using UV-Vis spectrophotometry. Rif-Complex-Lips formulations were evaluated using dynamic light scattering, transmission electron microscopy (TEM), 1H-NMR, absorption and emission spectroscopy. Dialysis was used for drug release study in two different media, pH 6.4 and 7.4. HeLa cells were used to assess potential cytotoxicity, and the uptake by lung fibroblasts and epithelial cells was investigated using fluorescence microscopy. The particle size and Zeta potential of Rif-Complex-Lips were approximately 594 nm and –50 mV. Spectroscopic analyses demonstrated molecular distribution of the cargo within the lipid core, and encapsulation efficiency of 58% for Complex and 86% for RIF. TEM analysis unveiled the existence of spherical nanoparticles in our samples, indicating the presence of liposomes. Rif-Complex-Lips exhibited much higher release rates for both INH and RIF at pH 6.4 compared to those tested at pH 7.4. In addition, there was no cytotoxicity on HeLa cells, but remarkable Rif-Complex-Lips internalization by peripheral lung fibroblasts and epithelial cells. Hence, Rif-Complex-Lips are promising vehicles for intracellular delivery of antimicrobial drugs.
- Full Text:
- Date Issued: 2020
- Authors: Nkanga, Christian I , Roth, Michael , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183481 , vital:43999 , xlink:href="https://doi.org/10.1166/jbn.2020.2880"
- Description: An inclusion complex of isoniazid-grafted phthalocyanine with gamma-cyclodextrin (Complex) was co-encapsulated with rifampicin (RIF) in crude soybean lecithin liposomes using a heating method. The encapsulation efficiency (%EE) of the Complex-RIF co-loaded liposomes (Rif-Complex-Lips) was determined using UV-Vis spectrophotometry. Rif-Complex-Lips formulations were evaluated using dynamic light scattering, transmission electron microscopy (TEM), 1H-NMR, absorption and emission spectroscopy. Dialysis was used for drug release study in two different media, pH 6.4 and 7.4. HeLa cells were used to assess potential cytotoxicity, and the uptake by lung fibroblasts and epithelial cells was investigated using fluorescence microscopy. The particle size and Zeta potential of Rif-Complex-Lips were approximately 594 nm and –50 mV. Spectroscopic analyses demonstrated molecular distribution of the cargo within the lipid core, and encapsulation efficiency of 58% for Complex and 86% for RIF. TEM analysis unveiled the existence of spherical nanoparticles in our samples, indicating the presence of liposomes. Rif-Complex-Lips exhibited much higher release rates for both INH and RIF at pH 6.4 compared to those tested at pH 7.4. In addition, there was no cytotoxicity on HeLa cells, but remarkable Rif-Complex-Lips internalization by peripheral lung fibroblasts and epithelial cells. Hence, Rif-Complex-Lips are promising vehicles for intracellular delivery of antimicrobial drugs.
- Full Text:
- Date Issued: 2020
Cyanide-induced free radical production and lipid peroxidation in rat brain homogenate is reduced by aspirin
- Daya, Santylal, Walker, Roderick B, Anoopkumar-Dukie, Shailendra
- Authors: Daya, Santylal , Walker, Roderick B , Anoopkumar-Dukie, Shailendra
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184346 , vital:44210 , xlink:href="https://doi.org/10.1007/BF02674529"
- Description: The neuroprotective properties of aspirin were investigated using cyanide-induced neurotoxicity as model. Cyanide, a known neurotoxic agent significantly increased lipid peroxidation and superoxide anion levels in rat brain homogenate in a concentration-dependent manner (0.25–1.0 mM). When homogenate, containing 1.0 mM KCN was cotreated with aspirin (1.0 mM) there was a significant decrease in lipid peroxidation. Aspirin (0.5 mM and 1.0 mM) also significantly reduced KCN-induced superoxide anion generation. The results of the present report therefore indicate a neuroprotective role for aspirin.
- Full Text:
- Date Issued: 2000
- Authors: Daya, Santylal , Walker, Roderick B , Anoopkumar-Dukie, Shailendra
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184346 , vital:44210 , xlink:href="https://doi.org/10.1007/BF02674529"
- Description: The neuroprotective properties of aspirin were investigated using cyanide-induced neurotoxicity as model. Cyanide, a known neurotoxic agent significantly increased lipid peroxidation and superoxide anion levels in rat brain homogenate in a concentration-dependent manner (0.25–1.0 mM). When homogenate, containing 1.0 mM KCN was cotreated with aspirin (1.0 mM) there was a significant decrease in lipid peroxidation. Aspirin (0.5 mM and 1.0 mM) also significantly reduced KCN-induced superoxide anion generation. The results of the present report therefore indicate a neuroprotective role for aspirin.
- Full Text:
- Date Issued: 2000